Question

5 gal/min through a 2” pipe will have what flow velocity. If the pipe is increased...

5 gal/min through a 2” pipe will have what flow velocity. If the pipe is increased to 4” what will happen to the flow velocity?

Homework Answers

Answer #1

Thanks

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Please show work 1. If 27,323 ft3 each day comes out of a pipe, what is...
Please show work 1. If 27,323 ft3 each day comes out of a pipe, what is the average flow through the pipe in L/min? 2. A submarine that is submerged at a depth of 1000 ft has a hydrostatic force acting on its hull with a force of 4,996,619 N per one square m of hull surface area. What is the pressure in psi? 3. If all the imported petroleum came into the US in one 20 ft inside diameter...
Water flows through a 5-cm-diameter pipe at the average velocity of 1.25 m/s. (a) In the...
Water flows through a 5-cm-diameter pipe at the average velocity of 1.25 m/s. (a) In the dimensions of L/s, what is the volumetric flow rate? (b) If the diameter of the pipe is reduced by 20% at a constriction, by what percentage does the water’s velocity change? I need answer only in typed form. otherwise I'll downvote
SAE 30 Oil at 60oF flows through a 1.5 m diameter pipe at a velocity of...
SAE 30 Oil at 60oF flows through a 1.5 m diameter pipe at a velocity of 2.5 m/s. (3 points) What type of flow is occurring in the pipe:                 (2 points) If the pipe is made out of cast iron, determine the friction factor for flow through this pipe.
A flowrate enters a junction and is split into two pipes: Pipe P-1 and Pipe P-2....
A flowrate enters a junction and is split into two pipes: Pipe P-1 and Pipe P-2. The diameters of both pipes are 12 inches and have C values of 135. The length of P-1 is 1650 feet, while the length of P-2 is 800 feet. If the flowrate of P-1 is fixed at 1000 gal/min, what is the flowrate in P-2? Round your answer to the nearest whole gal/min.
A proposed PVC pipeline (C=130) has a design flow of 4200 gal/min. The pipeline needs to...
A proposed PVC pipeline (C=130) has a design flow of 4200 gal/min. The pipeline needs to be sized such that the unit headloss does not exceed 10 ft/1,000 ft. NOTE: When sizing the pipeline round up your minimum diameter to the next even number as your actual pipeline diameter. After sizing the pipe, what is the actual unit headloss in the sized pipeline? Round your headloss to the nearest tenth (ft/1,000 ft).
1.Water flows through a horizontal pipe at a rate of 39 gpm (1 ft3 = 7.48...
1.Water flows through a horizontal pipe at a rate of 39 gpm (1 ft3 = 7.48 gal). What is the velocity in the larger opening of the pipe that reduces from 5.4 to 2.4 inches in diameter? Larger Pipe Velocity = ft/s 2. What must be the diameter of a hose if it is to deliver 7 liters of oil in 1.2 minutes with an exit velocity of 2 m/s? Pipe Diameter = milimeters
A fluid with density of 61.8 lbm/ft3 is pumped at a rate of 345 gal/min to...
A fluid with density of 61.8 lbm/ft3 is pumped at a rate of 345 gal/min to a tank vented to the atmosphere. The fluid is pumped at 77° F through a 2” schedule-40 steel pipe with an equivalent length of 500 ft. The ID of the pipe is 2.067” and the friction factor is 0.029213. The line has a globe control valve in the full-open position with an equivalent length of 110 ft. Calculate the pressure drop across the control...
Oil at a rate of 300 gal/min is flowing steadily from tank A to tank B...
Oil at a rate of 300 gal/min is flowing steadily from tank A to tank B through 3000 ft of 3-in schedule 40 pipe (Appendix A.2). The inside diameter (ID) of 3-in schedule pipe is 3.068 in. The line contains two globe valves, a swing check valve, an a nine 90oC elbows. The oil has a density of 62.3 lbm/ft3 and a viscosity of 50 cP. The levels of the free surfaces are the same in both tanks. Tank B...
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a...
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a diameter of 1.7 meters and a pressure of 500 kPa. If the pipe constricts to a diameter of 0.5 meters, what is the pressure in the constricted pipe section. (Assume the oil flow rate is 65 m3/min and oil density is 900 kg/m3) 49,432.419 kPa 13.096115 kPa 486.403885 kPa 513.801133 kPa 2. Oil is flowing through a horizontal pipe expansion. In the small section,...
The water enters the two-story building through a horizontal pipe with an inner diameter 4 cm...
The water enters the two-story building through a horizontal pipe with an inner diameter 4 cm and the pressure of 10 atm. The velocity of the water flow in the pipe is 5 m/s. The horizontal pipe is connected to a vertical pipe which leads to bathrooms in each story. a) What is the velocity of the water flow in the vertical pipe if the diameter of the pipe is 2 cm. b) What is the pressure in the pipe...