Question

An electric power generating plant has an output of 100 MW. The boiler of the plant...

An electric power generating plant has an output of 100 MW. The boiler of the plant operates at 300 degrees celsius. The condenser operates at 40 degrees celsius.
a. At what rate (joules per hour) must heat be supplied to the boiler?
b. The condenser is cooled by water, which may undergo a temperature rise of no more than 10 degrees celsius. What volume of cooling water in cubic meters per hour is required to operate the plant?
c. The boiler temperature is to be raised to 540 degrees celsius, but the condensed temperature and electric output will remain the same. Will the cooling water requirement be increased, decreased or remain the same?

Science   Physics   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Steam leaves the boiler of a 100 MW Rankine cycle power plant at 400°C and 3.5MPa....
Steam leaves the boiler of a 100 MW Rankine cycle power plant at 400°C and 3.5MPa. The Turbine has an isentropic efficiency of 85% and exhausts at 15 kPa. In the condenser, the water is subcooled to 38°C by lake water at 13°C. The pump isentropic efficiency is 75%. a) Draw and label the T-s diagram for this cycle b) Determine the cycle’s thermal efficiency c) Determine the mass flow rate of the steam in the boiler (kg/h) d) Determine...
A nuclear power plant generates 3000 MW of heat energy from nuclear reactions in the reactor's...
A nuclear power plant generates 3000 MW of heat energy from nuclear reactions in the reactor's core. This energy is used to boil water and produce high-pressure steam at 300?C . The steam spins a turbine, which produces 900MW of electric power, then the steam is condensed and the water is cooled to 25?C before starting the cycle again. A) What is the maximum possible thermal efficiency of the power plant? Express your answer using two significant figures. B) Cooling...
A nuclear power plant has an electrical power output of 1400 MW and operates with an...
A nuclear power plant has an electrical power output of 1400 MW and operates with an efficiency of 33%. If excess energy is carried away from the plant by a river with a flow rate of 1.0 ? 106 kg/s, what is the rise in temperature of the flowing water? °C
In a steam power plant which has a net power output of 45 MW, steam is...
In a steam power plant which has a net power output of 45 MW, steam is supplied at 10 MPa and 500°C. The steam is reheated after passing through high pressure turbine to its original temperature at a pressure of 1 MPa. Then the steam expanded to condenser pressure. The condenser pressure is 5 kPa. Show the cycle on a T-s diagram with respect to saturation lines, and determine; (i) the thermal efficiency of the cycle; and (ii) the mass...
A steam power plant design details are supplied as follows. The boiler tubes can withstand pressures...
A steam power plant design details are supplied as follows. The boiler tubes can withstand pressures 6.3 MPa and to a maximum temperature of 460 0C. The condenser operates at 66 0C. The pumps and turbines available can handle only single-phase materials, and they operate isentropically. Is there a need for any reheat for this cycle? If so, how many stages of reheat are needed? What is the maximum temperature at the exit of the last heater? What is the...
. A nuclear power plant has an electrical power output of 1200 MW and operates with...
. A nuclear power plant has an electrical power output of 1200 MW and operates with an efficiency of 34%. If the excess energy is carried away from the plant by a river with a flow rate of 1.2 ×106 kg/s, what is the rise in the temperature of the flowing water? (1 MW = 1.0 ×106 W) a) 0.24 ˚C b) 0.46 ˚C c) 0.70 ˚C d) 24 ˚C
Part A A coal-fired plant generates 600 MW of electric power. The plant uses 4.8 ×...
Part A A coal-fired plant generates 600 MW of electric power. The plant uses 4.8 × 106 kg of coal each day. The heat produced by the combustion of coal is 3.3 × 107 J/kg. The steam that drives the turbines is at a temperature of 300°C, and the exhaust water is at 37°C. Part A (a) What is the overall efficiency of the plant for generating electric power? Part B (b) What is the maximum efficiency that this plant...
A steam power plant operates with a high pressure of 4 MPa and has a boiler...
A steam power plant operates with a high pressure of 4 MPa and has a boiler exit at 600C recieving heat from 700C reservoir. The ambient air at 20C provides cooling to maintain the water/vapor mixture in the condenser at 60C. All components are ideal (reversible) except the turbine which has an efficientcy 92% of a reversible, isentropic process. other than that the irreversibility of the turbine, the power plant can be considered as a Rankine cycle. Determine the following...
Consider a 1.4 MW power plant (this is the useful output in the form of electric...
Consider a 1.4 MW power plant (this is the useful output in the form of electric energy) that operates between 30∘C and 450∘C at 65% of the Carnot efficiency. This is enough electric energy for about 750 homes. One way to use energy more efficiently would be to use the 30∘C "waste" energy to heat the homes rather than releasing that heat energy into the environment. This is called cogeneration, and it is used in some parts of Europe but...
Atlantic Power, a large electric power utility, has built a modern nuclear power plant. This plant...
Atlantic Power, a large electric power utility, has built a modern nuclear power plant. This plant discharges waste water that is allowed to flow into the Atlantic Ocean. Environment Canada has ordered that the waste water temperature must be less than 15 degrees Celsius on average. The company would like to determine whether the population mean waste water temperature is indeed less than 15 degrees. In the real world, hundreds of temperature readings would be gathered each day; in this...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT