Question

Piece of aluminum with an area of .01 M2 and a thickness of 1 cm has...

Piece of aluminum with an area of .01 M2 and a thickness of 1 cm has a temperature of -5 degrees celsius on one side and -35 degrees Celsius on the other side

a. Find the heat per second that can moves through the aluminum

b. If 1 cm of ice with the same area as the aluminum accumulates on the warmer side of the aluminum, find out how much heat per second now flows through the combination

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A styrofoam box ( k=.01 J/(s8m8C) containing ice water at 0C has a total area of...
A styrofoam box ( k=.01 J/(s8m8C) containing ice water at 0C has a total area of .950m^2 and walls with thickness 2.50cm in a 35 C room. What is the heat flow through the walls? The sun has a surface temperature 5800K and a radius of 6.96X10^8m. It sits in empty space (T=3K). Assuming the sun has emissivity 1.0, what is the heat flow rate from the Sun?
The initial temperature distribution across a wall with a thickness of 60 cm is described with...
The initial temperature distribution across a wall with a thickness of 60 cm is described with the following function: T(x) = -250x+100x2+ 20x3/ 2x where T is temperature in degrees Celsius and x is the coordinate in meters. The wall has a thermal conductivity of 2.5 W cm-1 K-1. (i)        On a unit surface area basis, determine the heat flux into the wall on the left face. (ii)       On a unit surface area basis, determine the heat flux out of...
PLEASE ANSWER QUESTION 2: 1)A calorimeter has aluminum inner cup of mass 120 gram containing 100...
PLEASE ANSWER QUESTION 2: 1)A calorimeter has aluminum inner cup of mass 120 gram containing 100 ml water at temperature 20 degree Celsius. Brass piece with mass 100 gram is heated to 100 degree Celsius, and then immersed in the calorimeter. Calculate the final temperature of the system. The specific heat of brass is 0.09 cal/(gramXdeg.C) . The additional necessary data are provided in the text. 2)A chunk of 15 gram ice is pulled from a freezer keeping temperature -20...
A house has well-insulated walls 15.0 cm thick (assume conductivity of air) and area 500 m2...
A house has well-insulated walls 15.0 cm thick (assume conductivity of air) and area 500 m2 , a roof of wood 5.0 cm thick and area 270 m2 , and uncovered windows 0.55 cm thick and total area 30 m2 . I don't need help with question A, I got it right but i don't know how to do b and c A) Assuming that heat is lost only by conduction, calculate the rate at which heat must be supplied...
Consider a large uranium plate of thickness 5 cm and thermal conductivity k = 28 W/m...
Consider a large uranium plate of thickness 5 cm and thermal conductivity k = 28 W/m K in which heat is generated uniformly at a constant rate of q˙ = 6 × 10^5 W/m^3 . One side of the plate is insulated while the other side is subjected to convection in an environment at 30◦C with a heat transfer coefficient of h = 60 W/m2 K. Considering six equally spaced nodes with a nodal spacing of 1 cm, (a) Sketch...
What did I do wrong? 1) A 44.3 g piece of Aluminum is dropped into a...
What did I do wrong? 1) A 44.3 g piece of Aluminum is dropped into a beaker with 88.2 ml of water. The temperature of the water warms from 35.1 degrees Celsius to 53.7. What quantity of heat energy did the piece of aluminum give off? Specific heat of water = 4.18 J/g*K, the density of water is 1.00 g/mL. I calculated Delta T (18.6) .... Then added mass of water and mass of aluminum (=132.5g).... and q = 4.18...
2 parts thx! 1. A flat aluminum plate has a circular hole of diameter 1.739 cm...
2 parts thx! 1. A flat aluminum plate has a circular hole of diameter 1.739 cm at 0.00 °C.What is the change in its diameter when the temperature of the plate is increased to 116 °C? For reference, the coefficient of thermal expansion for aluminum is 2.3 x 10-5/C°. Give at least 2 significant figures in your answer, which should be in cm. 2. A flat plate made of an unknown metal has a circular hole of diameter 2.89 cm...
1) A cylindrical copper rod of length 2 m and cross-sectional area of 5 cm^2 is...
1) A cylindrical copper rod of length 2 m and cross-sectional area of 5 cm^2 is insulated to prevent heat loss through its surface. The ends are maintained at a temperature difference of 100 C by having one end in a water-ice mixture and the other in a boiling water/steam mixture. If you initially have 10 g of ice on the one end and lots of steam on the other, how long does it take to melt the ice? 2)...
A long 8-cm-diameter steam pipe whose external surface temperature is 90°C passes through some open area...
A long 8-cm-diameter steam pipe whose external surface temperature is 90°C passes through some open area that is not protected against the winds. Determine the rate of heat loss from the pipe per unit of its length when the air is at 1 atm pressure and 7°C and the wind is blowing across the pipe at a velocity of 47 km/h. The properties of air at 1 atm and the film temperature of (Ts + T∞)/2 = (90 + 7)/2...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10 cm thick. Since the shaft exterior radiation beam coefficient is 0.8 and the flue gas temperature is 350°C, the external ambient temperature is 25°C and the outer ambient heat transport coefficient is 20 W/m2K; a) Calculate the shaft exterior temperature. b) In order to reduce the risk of burn injury that may occur in the body, the shaft is asked to be below 55°Cve...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT