Question

A cylindrical tank with a large diameter is filled with water to a depth D =...

A cylindrical tank with a large diameter is filled with water to a depth D = 0.405 m. A hole of cross-sectional area A = 5.62 cm^2 in the bottom of the tank allows water to drain out. (a) What is the rate at which water flows out, in cubic meters per second? (b) At what distance below the bottom of the tank is the cross-sectional area of the stream equal to one-half the area of the hole?

Homework Answers

Answer #1

Let me know in comments if you need any further clarification on this.
Please upvote if you have understood the solution. Thank you.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A closed and elevated vertical cylindrical tank with diameter 80 cm contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 80 cm contains water to a depth of 0.900 m . A worker opens a circular hole with diameter 12 cm in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity ( ½w = 1000 kg=m3 ). a) (12 points) Just after the...
A closed and elevated vertical cylindrical tank with diameter 2.20 m contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 2.20 m contains water to a depth of 0.900 m . A worker accidently pokes a circular hole with diameter 0.0180 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity. Part A Just after the hole is made, what is the...
A closed and elevated vertical cylindrical tank with diameter 1.40 m contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 1.40 m contains water to a depth of 0.800 m . A worker accidently pokes a circular hole with diameter 0.0140 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity. Questions 1. How much time does it take for all the...
Consider a tank full of water, cylindrical in shape, 3.0 meters high and 1.0 meter in...
Consider a tank full of water, cylindrical in shape, 3.0 meters high and 1.0 meter in diameter. Suppose there is a hole of area 1.0 cm2 at the bottom of the tank. Calculate (a) the speed with which water is discharged, then (b) the volume of water discharged each second.
A large open tank of water is filled to a height of 10 meters. Someone pokes...
A large open tank of water is filled to a height of 10 meters. Someone pokes a hole with a radius 2 cm at the bottom of it. a) Find the speed of the water coming out of the hole. b) How long does it take for 1 m3 to leak out? c) Now assume the top of the tank is not open, but vacuum sealed at zero pressure. Now how long does it take for 1 m3 to leak...
A cylindrical water tank has water flowing in at I cubic meters per second. Let A...
A cylindrical water tank has water flowing in at I cubic meters per second. Let A be the area of the cross section of the tank in meters. Suppose water is flowing from the bottom of the tank at a rate proportional to the height of the water level. Set up the differential equation for h, the height of the water, introducing and naming constants that you need. You should also give the units for your constants.
A cylindrical bucket, open at the top, is 24.0 cm high and 13.0 cm in diameter....
A cylindrical bucket, open at the top, is 24.0 cm high and 13.0 cm in diameter. A circular hole with a cross-sectional area 1.50 cm2 is cut in the center of the bottom of the bucket. Water flows into the bucket from a tube above it at the rate of 2.40×10−4 m3/s . How high will the water in the bucket rise?
An open cylindrical tank with diameter of 3 ft is filled with a liquid to 1...
An open cylindrical tank with diameter of 3 ft is filled with a liquid to 1 ft depth when the tank is stationary. The tank is rotated about its centerline, causing the water level to drop in the center and rise towards the walls of the tank. Calculate a.the angular velocity in rpm at which the tank bottom will first be exposed andb.the maximum water height in ft in the tank at this velocity.
A cylindrical bucket, open at the top, is 24.0 cm high and 12.0 cm in diameter....
A cylindrical bucket, open at the top, is 24.0 cm high and 12.0 cm in diameter. A circular hole with a cross-sectional area 1.39 cm^2 is cut in the center of the bottom of the bucket. Water flows into the bucket from a tube above it at the rate of 2.39×10−4 m^3/s . How high will the water in the bucket rise?
a cylindrical tank or radius 2 meters and height 7 meters is filled with water to...
a cylindrical tank or radius 2 meters and height 7 meters is filled with water to a depth of 4 meters. how much work does it take to pump all the water over the top edge of the tank?