Question
4. [15 pts] A 4.00 m long, 7.50 cm diameter rod is made of an unknown...
4. [15 pts] A 4.00 m long, 7.50 cm diameter rod is made of an unknown metal. In order to determine the type of metal, a 2500 N force is exerted on each end of the rod, causing the length of the rod to decrease by 2.50*10-5 m. What metal is the rod made of?
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
A rod 2 m long, 2 cm in diameter and 5 kg in mass is fixed...
A rod 2 m long, 2 cm in diameter and 5 kg in mass is fixed at
one end and is stricken by a force F to produce a 3rd overtone and
elongates at 1 cm. A string of length L and mass 750 grams is puled
by a T = 30 to produce a 3rd harmonic frequency. Determine the
force F and length L that produces the same value of frequencies in
the two materials, if the sound wave...
Consider a rod that is 0.220 cm in diameter and 1.50 m long, with a mass...
Consider a rod that is 0.220 cm in diameter and 1.50 m long,
with a mass of 0.0400 kg.
1. Find the moment of inertia about an axis perpendicular to the
rod and passing through one end.(kg*m^2 units please)
2. Find the moment of inertia about an axis along the length of
the rod.
Express your answer in kilogram meters squared.
A metal rod that has a diameter of 1.0 cm and a length of 0.75 m...
A metal rod that has a diameter of 1.0 cm and a length of 0.75 m
is stretched by 2.5 mm when subjected to a force of 115 kN
(kilonewtons). Assuming that it remains in its elastic region, how
much work would it take to compress this rod by 5.0 mm?
The active element of a certain laser is made of a glass rod 25.0 cm long...
The active element of a certain laser is made of a glass rod
25.0 cm long and 1.60 cm in diameter. Assume the average
coefficient of linear expansion of the glass is equal to
9.00 10-6 (°C)−1. The temperature
of the rod increases by 62.0°C.
(a) What is the increase in its length?
cm
(b) What is the increase in its diameter?
cm
(c) What is the increase in its volume?
cm3
In a bar drawing manufacturing process a2.0” long rod with a diameter of 0.5” is pulled...
In a bar drawing manufacturing process a2.0” long rod with a
diameter of 0.5” is pulled with a F=6000 lb. force.The diameter
decreases permanently to 0.4”.
Determine:
a.The final length of the rod
b.The true stress and strain at this load.
c. The engineering stress and strain at this load.
d. The stress at which necking occurs.
e. If the length just before necking occurs is 4.0 “ , find the
force at which necking occurs.
Strength coefficient k= 100...
2.1Consider a solid cylindrical rod of length 0.15 m and diameter 0.05 m. The top and...
2.1Consider a solid cylindrical rod of length 0.15 m and
diameter 0.05 m. The top and bottom surfaces of the rod are
maintained at constant temperatures of 20oC and 95oC, respectively,
while the side surface is perfectly insulated. 2.1.1 Draw a diagram
to represent the situation described above. (3) 2.1.2 Determine the
rate of heat transfer through the rod if it is made of copper, k =
380 W/m? oC. (4) 2.1.3 Determine the rate of heat transfer through
the...
Due to the operational conditions and temperature gradient, a 70 mm diameter, 1.55 m long steel...
Due to the operational conditions and temperature gradient, a 70
mm diameter, 1.55 m long
steel rod within a machine assembly is subjected to a combination
of tensile loading of 150 N and
thermal loading which imposes a longitudinal force of 230 N. The
total loading results in an even
distribution of forces on the body of the rod causing it to change
its dimensions by increasing 0.5
mm in length at both ends and decreasing by 0.0125 mm at...
1- Water flows in a 10 m long and 4 cm diameter pipe contains 4 elbows...
1-
Water flows in a 10 m long and 4 cm diameter pipe
contains 4 elbows ( KL= 0.2 ) at velocity 8 m/s.
Calculate the total head losses when the friction factor
f=0.03
35.56 m
22.07 m
27.07 m
15.46 m
2- water flows in a 10 m long and 5 cm diameter
horizontal pipe at rate 15 l/s
Calculate the pressure drop
Take the density of water 1000 kg/m3 and the
dynamic viscosity 0.001 kg/m.s
74.13 kPa
96.41...
1)A 7.50 kg disk with a diameter of 88.0 cm is spinning at a rate of...
1)A 7.50 kg disk with a diameter of 88.0 cm is spinning at a
rate of 280 revolutions per minute. A block of wood is pressed into
the edge of the disk with a force of 35.0 N. The coefficient of
friction between the wood and the disk is 0.300. How long does it
take the disk to stop spinning?
A)4.60s B)22.0s C)15.0s D)1.20s E)8.90s
2)The moon has a mass of 7.40 x 10^22 kg and a diameter of 3476...
A.) Consider a non-rotating space station in the shape of a long thin uniform rod of...
A.) Consider a non-rotating space station in the shape of a long
thin uniform rod of mass 4.20 x 10^6 kg and length 953 meters.
Rocket motors on both ends of the rod are ignited, applying a
constant force of F = 4.40 x 10^5 N to each end of the rod as shown
in the diagram, causing the station to rotate about its center. If
the motors are left running for 1 minutes and 26 seconds before
shutting off,...
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 3 minutes ago
asked 10 minutes ago
asked 12 minutes ago
asked 15 minutes ago
asked 36 minutes ago
asked 40 minutes ago
asked 47 minutes ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago