Question

A 2.54 cm inner diameter hose is connected to a freshwater pump with a gauge pressure...

A 2.54 cm inner diameter hose is connected to a freshwater pump with a gauge pressure of 3.65 atm. The volume flow rate at the pump is 2.50 gal/min. The other end of the hose is held at an angle of 300 above the horizontal at a height of 1.20 m.

  1. Determine the velocity of the water as it exits the hose.
  2. Determine the inner diameter of the hose as the water exits the hose.
  3. Determine the horizontal distance from the hose the water lands, plus the time it takes for the water to hit the ground.
  4. Determine the velocity of the water the moment it hits the ground.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A hose for firefighters has an inner diameter of 8.0 cm. The pressure inside the hose...
A hose for firefighters has an inner diameter of 8.0 cm. The pressure inside the hose is 380 kPa higher than the air pressure. The nozzle at the end of the hose has an inner diameter of 3.50 cm. a) What is the velocity with which the water leaves the nozzle? b) How many liter water per second leaves the hose? Use 1.00·10^3 kg/m3 as density for water
Question 3. A garden hose attached with a nozzle is used to fill a 25-gal (1gal...
Question 3. A garden hose attached with a nozzle is used to fill a 25-gal (1gal =3.785L) bucket. The water flows in the hose with the inner diameter of 1.1 in, and exits at the nozzle at 50 m/s of velocity. If it takes 0.8 min to fill the bucket with water, determine i. the volume and mass flow rates of water through the hose, ii. the inner dimeter at the nozzle exit? iii. the kinetic energy changes through the...
Question 3. A garden hose attached with a nozzle is used to fill a 25-gal (1gal...
Question 3. A garden hose attached with a nozzle is used to fill a 25-gal (1gal =3.785L) bucket. The water flows in the hose with the inner diameter of 1.1 in, and exits at the nozzle at 50 m/s of velocity. If it takes 0.8 min to fill the bucket with water, determine i. the volume and mass flow rates of water through the hose, ii. the inner dimeter at the nozzle exit? iii. the kinetic energy changes through the...
A long horizontal hose of diameter 3.6 cm is connected to a faucet. At the other...
A long horizontal hose of diameter 3.6 cm is connected to a faucet. At the other end, there is a nozzle of diameter 1.8 cm. Water squirts from the nozzle at velocity 16 m/sec. Assume that the water has no viscosity or other form of energy dissipation. 1)What is the velocity of the water in the hose ? 2)What is the pressure differential between the water in the hose and water in the nozzle ? 3) How long will it...
A long horizontal hose of diameter 3.8 cm is connected to a faucet. At the other...
A long horizontal hose of diameter 3.8 cm is connected to a faucet. At the other end, there is a nozzle of diameter 1 cm. Water squirts from the nozzle at velocity 18 m/sec. Assume that the water has no viscosity or other form of energy dissipation. 1) What is the velocity of the water in the hose ? m/s 2) What is the pressure differential between the water in the hose and water in the nozzle ? Pa 3)...
The water enters the two-story building through a horizontal pipe with an inner diameter 4 cm...
The water enters the two-story building through a horizontal pipe with an inner diameter 4 cm and the pressure of 10 atm. The velocity of the water flow in the pipe is 5 m/s. The horizontal pipe is connected to a vertical pipe which leads to bathrooms in each story. a) What is the velocity of the water flow in the vertical pipe if the diameter of the pipe is 2 cm. b) What is the pressure in the pipe...