Question

The figure below shows two masses m1 =8.6 kg and m2 =2.8 kg on a frictionless surface. As shown, a force F1 =23.6 N pushes on m1 from the left and a force F2 = - 14.9 N pushes on m2 from the right. Find the force that m1 exerts on m2. (Hint, make use of Newton's third law and find the acceleration of the entire system first).

Answer #1

Dear student,

Find this solution, and RATE IT ,If you find it is helpful .your rating is very important to me.If any incorrectness ,kindly let me know I will rectify them soon.

Thanks for asking ..

Objects with masses m1 = 12.0 kg and
m2 = 8.0 kg are connected by a light string
that passes over a frictionless pulley as in the figure below. If,
when the system starts from rest, m2 falls 1.00
m in 1.48 s, determine the coefficient of kinetic friction between
m1 and the table.
Express the friction force in terms of the coefficient of kinetic
friction. Obtain an expression for the acceleration in terms of the
masses and the...

Two objects of masses
m1 = 0.40 kg
and
m2 = 0.92 kg
are placed on a horizontal frictionless surface and a compressed
spring of force constant
k = 290 N/m
is placed between them as in figure (a). Neglect the mass of the
spring. The spring is not attached to either object and is
compressed a distance of 9.6 cm. If the objects are released from
rest, find the final velocity of each object as shown in figure
(b)....

Two packing crates of masses
m1 = 10.0 kg
and
m2 = 4.70 kg
are connected by a light string that passes over a frictionless
pulley as in the figure below. The 4.70-kg crate lies on a smooth
incline of angle 35.0°. Find the following.
Two crates are connected to each other by a string that passes
over a pulley, which is attached to the top corner of a wedge. The
crate of mass m1 hangs freely below the pulley....

Two objects with masses of m1 = 3.90 kg and
m2 = 5.70 kg are connected by a light string
that passes over a frictionless pulley, as in the figure below.
A string passes over a pulley which is suspended from a
horizontal surface. A circular object of mass
m1 and a rectangular object of
m2 are, respectively, attached to the left and
right ends of the string.
(a) Determine the tension in the string. (Enter the magnitude
only. Due...

Two masses,
m1=3 kg and m2=2 kg are on a horizontal
surface and are connected together via a massless rope. An external
force F pulls on m1 at an angle q=30° from the
horizontal, as shown in the Figure 2 below. There is friction
between m2 and the surface, with coefficients of
friction
ms=0.4 and
mk=0.3, however the friction between m1 and
the surface is negligibly small.
What is the minimum value of F such that the masses will begin...

Objects of masses m1 = 4.00 kg and m2 = 9.00 kg are connected
by a light string that passes over a frictionless pulley as in the
figure below. The object m1 is held at rest on the floor, and
m2 rests on a fixed incline of θ = 37.5°. The objects are
released from rest, and m2 slides 1.10 m down the slope of the
incline in 4.45 s.
A triangular structure is oriented such that its base rests...

In the figure below, m1 = 3.2 kg, m2 = 5.3 kg, and the
coefficient of kinetic friction between the inclined plane and the
3.2-kg block is μk = 0.26. Find the magnitude of the acceleration
of the masses and the tension in the cord.
the ramp is 30 degrees m2 is hanging

1. The same force at different times on two masses m1 is given
an acceleration of 4m/s2 and m2 is given an acceleration of 1m/s2.
(a)What is the ratio of the masses , m2/m1 (b) suppose the two
masses are combined an the same force is acted on the combination .
what is its acceleration.
2. A 5g bullet is accelerated to 300m/s s down a 72cm gun barrel
. Assuming a uniform acceleration. what is the net force on...

Two masses m1 = 5 kg and m2 = 3 kg are connected by a
light rope dropped over a pulley as shown in the figure
a) Neglecting friction, what is the acceleration of these
masses?
b) What is the tension of the rope?
c) What will be the acceleration if the coefficient of friction for
the mass m1 is μk = 0.4?

An Atwood's machine consists of blocks of masses
m1 = 12.0 kg
and
m2 = 22.0 kg
attached by a cord running over a pulley as in the figure below.
The pulley is a solid cylinder with mass
M = 7.60 kg
and radius
r = 0.200 m.
The block of mass m2 is allowed to drop, and
the cord turns the pulley without slipping.
Two objects, blocks labeled m1 and
m2, are connected to a cord which is hung...

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 2 minutes ago

asked 15 minutes ago

asked 18 minutes ago

asked 20 minutes ago

asked 27 minutes ago

asked 37 minutes ago

asked 1 hour ago

asked 1 hour ago

asked 2 hours ago

asked 2 hours ago

asked 2 hours ago

asked 2 hours ago