Question

A wire carrying conventional current to the right experiences an upward force from an external magnetic...

A wire carrying conventional current to the right experiences an upward force from an external magnetic field. In what direction is the magnetic field pointing?

a. downward b. out of the page c. in to the page d. upward.

A voltmeter can be created with a galvanometer by doing which of the following? a. placing it in series with a resistor of very high resistance b. placing it in parallel with a resistor of very high resistance c. placing it in series with a resistor of very low resistance d. placing it in parallel with a resistor of very low resistance

Which of the following devices allowed for the technological advancement from the galvanometer to the DC motor? a. split ring commutator b. superconducting wire c. ohmmeter d. alternating magnets

For a single loop DC motor, the magnetic force on the wire loop is strongest when the plane of the loop is oriented in which of the following positions? a. perpendicular to the magnetic field b. parallel to the magnetic field c. rotated 45 clockwise from parallel of the magnetic field d. rotated 45 counterclockwise from parallel of the magnetic field

thank you

Science   Physics   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

if you have any doubt related to the answer please let me know in comments. Give a thumbs up if you like the answer.

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
1. A straight current-carrying wire in a uniform magnetic field experiences a magnetic force a only...
1. A straight current-carrying wire in a uniform magnetic field experiences a magnetic force a only if the wire is moving. b only if the wire is parallel to the field. c parallel to the wire. d perpendicular to the wire. 2. Magnetic field strength is greater a where the field lines are closer together. b where the field lines are further apart. c where the field lines are evenly spaced. d where the field lines cross. 3. A moving,...
a) A current loop in a uniform magnetic field experiences A net force and net torque...
a) A current loop in a uniform magnetic field experiences A net force and net torque A net force A net torque b) A current loop in an external magnetic field will rotate so that its own magnetic field is perpendicular to the external field parallel to the external field anti-parallel to the external field c) Is the simple motor motion similar to the simple pendulum motion? the loop rotates back and forth about an equilibrium point. No Yes d)...
The magnetic torque exerted on a flat current carrying loop of wire by a uniform magnetic...
The magnetic torque exerted on a flat current carrying loop of wire by a uniform magnetic field is: Select one: a. maximum when the plane of the loop is perpendicular to the magnetic field b. minimum when the plane of the loop is perpendicular to the magnetic field c. independent of the orientation of the loop d. maximum when the plane of the loop at an 45 to the magnetic field e. minimum when the plane of the loop is...
A magnetic field, strength 3T, has a direction out of the page. A loop of wire...
A magnetic field, strength 3T, has a direction out of the page. A loop of wire sits in the field and on the plane of the page (area vector of loop is out of page). The loop is much smaller than the extent of the field. The magnetic field starts to slowly change at a rate of -0.0001T/s. Looking down on the loop, which statement is correct? A. Magnetic flux out of page decreasing; anti-clockwise current induced in loop B....
(a) What is the direction of the force on a wire carrying a current due east...
(a) What is the direction of the force on a wire carrying a current due east in a location where the Earth’s field is due north? Both are parallel to the ground. (b) Calculate the force per meter if the wire carries 20.0 A and the field strength is 3.00*10^-5 T . (c) What diameter copper wire would have its weight supported by this force? (d) Calculate the resistance per meter and the voltage per meter needed.
A circular loop with 50 coils is pulled (to the right) from an external magnetic field...
A circular loop with 50 coils is pulled (to the right) from an external magnetic field of 0.8 T into the page. At t=0 the right edge of the loop is at the right edge of the magnetic field. After 0.250 seconds the loop has moved completely out of the magnetic field. Diameter of the coil is 10 cm Find the rate of change in flux through one loop as the loop if the loop is pulled out of the...
A long straight wire carries a current creating magnetic field. A positive charge is moving parallel...
A long straight wire carries a current creating magnetic field. A positive charge is moving parallel to the wire with the direction opposite to the current. The force exerted by the magnetic field on the charge is directed: A. Parallel to the wire, the same direction as the current; B. Parallel to the wire, direction opposite to the current; C. Perpendicular to the wire, toward it; D. Perpendicular to the wire, away from it; E. There is no magnetic force...
How do you find the magnetic force acting on a 3m-long current-carrying section of wire of...
How do you find the magnetic force acting on a 3m-long current-carrying section of wire of a given length if it sits in an external magnetic field (current = .01 Amps, magnetic field = .00002 teslas)? In what orientation(s) does it have to be placed to feel this force? The moving charges on the wire also produce a magnetic field of their own, how do I calculate this magnetic field at a distance of 1 meter from the wire? (if...
Magnets carrying very large currents are used to produce the uniform, large-magnitude magnetic fields that are...
Magnets carrying very large currents are used to produce the uniform, large-magnitude magnetic fields that are required for magnetic resonance imaging (MRI). A typical MRI magnet may be a solenoid that is 2.0 m long and 1.0 m in diameter, has a self-inductance of 4.4 H, and carries a current of 750 A. A normal wire carrying that much current would dissipate a great deal of electric power as heat, so most MRI magnets are made with coils of superconducting...
In order for a dc motor to function properly, it must be protected from physical damage...
In order for a dc motor to function properly, it must be protected from physical damage during the starting period. At starting conditions, the motor is not rotating, and armature generated voltage EA = 0 V. Since the internal resistance of a normal DC motor is very low, a very high current flows. It is possible for a motor to be severely damaged by such currents, even if they last for only a moment. A solution to the problem of...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT