Question

Write an expression for the stiffness of an end-loaded rectangular cantilever beam

Write an expression for the stiffness of an end-loaded rectangular cantilever beam

Science   Advanced-Physics   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

The expression for an end loaded cantilever beam is given below:

where is the stifness, is the force acting, is the deflection, is a constant which depends on the material, is the moment of inertia, is the length.

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
If the stiffness of the cantilever beam increases in a given input (force), how do you...
If the stiffness of the cantilever beam increases in a given input (force), how do you expect the change of the strain gauge output? Describe the reason with mathematical relationship.
Select the lightest, rectangular Douglas fir section for the cantilever beam of 10- ft span that...
Select the lightest, rectangular Douglas fir section for the cantilever beam of 10- ft span that will carry a uniform load of 250 lb/ft
Using Castigliano’s theorem determine the slope of the free end of a cantilever beam carrying a...
Using Castigliano’s theorem determine the slope of the free end of a cantilever beam carrying a uniformly distributed load w = 20 kN/m. The beam is 2 m long, with a section moment of inertia I =1317 cm^4. The material is steel with an elastic modulus of 200 GPa
Derive the 3-by-3 stiffness matrix for a beam element where the right end point is pin...
Derive the 3-by-3 stiffness matrix for a beam element where the right end point is pin supported such that the moment is zero (R4 = 0). The left end is fixed
3. A cantilever beam of span 5m is subjected to a uniformly distributed load of 30...
3. A cantilever beam of span 5m is subjected to a uniformly distributed load of 30 kN/m over the whole span. If the beam is made of Iron with E = 104 N/mm2 and moment of inertia I = 108 mm4. Apply the theroems of moment area method and find out the slope at the free end and deflection at the center of the beam?
#1-6 A 1.6 inches by 5.8 inches rectangular beam of wood is 11.4 feet long and...
#1-6 A 1.6 inches by 5.8 inches rectangular beam of wood is 11.4 feet long and has a modulus of elasticity of 1,500,000 psi. It is loaded in the JOIST (vertical) position at the center with 355 lbs. 1. What is the length of the beam in inches? (in) 2. What is the base of the beam? (in) 3. What is the height of the beam? (in) 4. What is the moment of inertia of the beam? (in 4 )...
Q3: Bending moment and shear force diagrams were plotted for a cantilever beam of span 10...
Q3: Bending moment and shear force diagrams were plotted for a cantilever beam of span 10 m when subjected to a uniformly distributed load of magnitude ‘w’ kN/m over the entire span, two concentrated loads ‘2w’ kN at a distance 3 m from the free end and ‘3.5w’ kN at a distance 4.5 m from the free end respectively. It was observed that the value for maximum bending moment acting on the beam is equal to (-175 kNm). Suggest a...
The stirrups of the cantilever beam are spaced 100 mm apart. The beam’s dimensions are 250...
The stirrups of the cantilever beam are spaced 100 mm apart. The beam’s dimensions are 250 mm x 415 mm and is reinforced by 2 – 20 mm ∅ tension bars. Neglecting the weight of concrete, determine the allowable load P applied at the free end. Use fs = 140 Mpa, fv = 70 Mpa, ?? = 0.80 ???,????? ?? = 1.40 ???,??? ? = 7 8 . Allow 65 mm distance from centroid of steel bars to extreme fibers....
The stirrups of the cantilever beam are spaced 100 mm apart. The beam’s dimensions are 250...
The stirrups of the cantilever beam are spaced 100 mm apart. The beam’s dimensions are 250 mm x 415 mm and is reinforced by 2 – 20 mm ∅ tension bars. Neglecting the weight of concrete, determine the allowable load P applied at the free end. Use fs = 140 Mpa, fv = 70 Mpa, ?? = 0.80 ???, ????? ?? = 1.40 ???, ??? ? = 7 8 . Allow 65 mm distance from centroid of steel bars to...
Compute the collapse load of a 8 ft propped cantilever beam with uniformly distributed load through...
Compute the collapse load of a 8 ft propped cantilever beam with uniformly distributed load through the length of the beam, if the plastic moment capacity is 60 k-ft. A) 45.25 kft B) 87.42 k/ft C) 10.92 k/ft D) 77.42 k/ft plzz give the detaild solution with detailed calculation
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT