Question

A hydraulic lift is to be used to lift a 1600-kg weight by putting a weight...

A hydraulic lift is to be used to lift a 1600-kg weight by putting a weight of 25 kg on a piston with a diameter of 10 cm. Determine the diameter of the piston on which the weight is to be placed.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 52.0 kg cheerleader uses an oil-filled hydraulic lift to hold four 110 kg football players...
A 52.0 kg cheerleader uses an oil-filled hydraulic lift to hold four 110 kg football players at a height of 1.10 m. If her piston is 15.0 cm in diameter, what is the diameter of the football players' piston?
2.A hydraulic car lift has an input piston of radius 6.20 cm and negligible weight. The...
2.A hydraulic car lift has an input piston of radius 6.20 cm and negligible weight. The output piston has a radius of 86.9cm. If the total load on the output plungers needs to be 12,000 N. What is the mechanical advantage of the hydraulic system input? 3. A hydraulic car lift has an input piston of radius 4.80 cm and negligible weight. The output piston has a radius of 101 cm. If the total load on the output plungers needs...
A hydraulic jack used to lift cars is called a three-ton jack. The large piston is...
A hydraulic jack used to lift cars is called a three-ton jack. The large piston is 22 mm in diameter, the small one 6.3 mm. Assume that a force of 3 tons is 3.0 x 104 N. a. What force must be exerted on the small piston to lift the 3-ton weight? b. Most jacks use a lever to reduce the force needed on the small piston. If the resistance arm is 3.0 cm, how long is the effort arm...
A 1225-kg car is raised using a hydraulic lift, which consists of a U-tube with arms...
A 1225-kg car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil with a density of 800. kg/m3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The wider piston is raised to a position that...
What force (in N) must be exerted on the master cylinder of a hydraulic lift to...
What force (in N) must be exerted on the master cylinder of a hydraulic lift to support the weight of a 2200 kg car (a large car) resting on the slave cylinder? The master cylinder has a 2.50 cm diameter, while the slave has a 24.0 cm diameter.
The fine piston of a hydraulic jack has a diameter of 1.30 cm. With an applied...
The fine piston of a hydraulic jack has a diameter of 1.30 cm. With an applied force of only 23 N it was possible to lift a weight of 1850 N. Assuming that both pistons are circular, what is the diameter of the wide working piston for this hydraulic jack?
The hydraulic oil in a car lift has a density of 8.73 x 102 kg/m3. The...
The hydraulic oil in a car lift has a density of 8.73 x 102 kg/m3. The weight of the input piston is negligible. The radii of the input piston and output plunger are 8.10 x 10-3 m and 0.101 m, respectively. What input force F is needed to support the 24000-N combined weight of a car and the output plunger, when (a) the bottom surfaces of the piston and plunger are at the same level, and (b) the bottom surface...
The hydraulic oil in a car lift has a density of 8.04 x 102 kg/m3. The...
The hydraulic oil in a car lift has a density of 8.04 x 102 kg/m3. The weight of the input piston is negligible. The radii of the input piston and output plunger are 7.63 x 10-3 m and 0.158 m, respectively. What input force F is needed to support the 26400-N combined weight of a car and the output plunger, when (a) the bottom surfaces of the piston and plunger are at the same level, and (b) the bottom surface...
1. A hydraulic lift uses a compressor to compress the hydraulic fluid with a moving piston...
1. A hydraulic lift uses a compressor to compress the hydraulic fluid with a moving piston (piston A) of radius RA = 4.83 cm. A second piston (piston B) of radius RB = 18.48 cm is used at the lift to lift cars. What force must be applied by piston A to lift a 14,871N car with piston B? 2. When a 0.438 kg mass is hung from a certain spring it stretches 0.119 m to its equilibrium position at...
The 80 kg student in the figure(Figure 1) balances a 1000 kg elephant on a hydraulic...
The 80 kg student in the figure(Figure 1) balances a 1000 kg elephant on a hydraulic lift. the diameter of the piston the student is standing on=0.57m When a second student joins the first, the height difference between the liquid levels in the right and left pistons is 30 cm . What is the second student's mass? Express your answer to two significant figures and include the appropriate units.