Question

The interior of a refrigerator has a surface area of 5 m2. It is insulated by...

The interior of a refrigerator has a surface area of 5 m2. It is insulated by a 2.2 cm thick material that has a thermal conductivity of 0.0085 J/m · s ·? C. The ratio of the heat extracted from the interior to the work done by the motor is 7.9% of the theoretical maximum. The temperature of the room is 43.5?C, and the temperature inside the refrigerator is 8.5?C. Determine the power required to run the compressor. Answer in units of W.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The wall of a refrigerator of 4m^2 surface area consists of two metal sheets with insulation...
The wall of a refrigerator of 4m^2 surface area consists of two metal sheets with insulation in between. The temperature of the inner wall surface is 5 C and that of the outer surface is 20 C. The thermal conductivity of the metal wall is 16 W/m C and that of the insulation is 0.017 W/m C. If the thickness of each metal sheet is 2mm, calculate the thickness of the insulation that is required so that the heat transferred...
A down jacket has a surface area of 0.78 m2 and is filled with a 4.2...
A down jacket has a surface area of 0.78 m2 and is filled with a 4.2 cm thick layer of down, which has a thermal conductivity of 6.0 10-6 kcal/(s · m · C°). The coat is worn by a person whose skin temperature is maintained at 29° C. The outer surface of the coat is at -19° C. At what rate is heat conducted through the coat?
A stainless steel pipe [thermal conductivity = 17 W/(m.C)] is being used to convey heated oil....
A stainless steel pipe [thermal conductivity = 17 W/(m.C)] is being used to convey heated oil. The inside surface temperature is 13 degrees C. The pipe is 2 cm thick with an inside diameter of 8 cm. The pipe is insulated with 0.04m thick insulation [thermal conductivity = 0.035 W/(m.C)]. The outer insulation temperature is 25 degrees C. Calculate the temperature of the interface between steel and insulation, assume steady-state conditions.
A house has well-insulated walls 15.0 cm thick (assume conductivity of air) and area 500 m2...
A house has well-insulated walls 15.0 cm thick (assume conductivity of air) and area 500 m2 , a roof of wood 5.0 cm thick and area 270 m2 , and uncovered windows 0.55 cm thick and total area 30 m2 . I don't need help with question A, I got it right but i don't know how to do b and c A) Assuming that heat is lost only by conduction, calculate the rate at which heat must be supplied...
You place your lunch leftovers in the refrigerator. Suppose the refrigerator needs to remove 1.4690E+4 J...
You place your lunch leftovers in the refrigerator. Suppose the refrigerator needs to remove 1.4690E+4 J of thermal energy from your lunch to cool it to the temperature of the inside of the refrigerator. In the meantime, this means the refrigerator produces 1.8957E+4 J of thermal energy that it expels into the kitchen as a result. What is the total work done by the compressor motor in the refrigerator? (Ignore any thermal loses due to friction in the motor.) What...
You place your lunch leftovers in the refrigerator. Suppose the refrigerator needs to remove 2.4280E+4 J...
You place your lunch leftovers in the refrigerator. Suppose the refrigerator needs to remove 2.4280E+4 J of thermal energy from your lunch to cool it to the temperature of the inside of the refrigerator. In the meantime, this means the refrigerator produces 3.2787E+4 J of thermal energy that it expels into the kitchen as a result. a.) What is the total work done by the compressor motor in the refrigerator? (Ignore any thermal loses due to friction in the motor.)...
consider a 0.8 cm thick steel plate with a thermal conductivity of 50W/m-k.When the inside surface...
consider a 0.8 cm thick steel plate with a thermal conductivity of 50W/m-k.When the inside surface of the plate is subjected to a uniform heat flux 0f 5*104 w/m2 the oter surface temperature of the plate is measured to be 110c under steady operating condition a)express the differential equation and the boundary conditions for steady one dimensional heat conduction through the wall b)obtain the relation for the variation of temperature in the plate by solving the differential equation. c)evaluate the...
Steam at an average temperature of ?∞= 400°C flows through a steel pipe. The inner and...
Steam at an average temperature of ?∞= 400°C flows through a steel pipe. The inner and outer radii of the pipe are r1 = 4 cm and r2 = 4.5 cm, respectively, and the outer surface of the pipe is insulated with a layer of 50 mm thick-calcium silicate of thermal conductivity of k = 0.5 W/m.K, and is maintained at 350 °C. If the convection heat transfer coefficient on the inner surface of the pipe is h = 65...
Consider a person whose exposed surface area is 1.7 m2, emissivity is 0.9, and surface temperature...
Consider a person whose exposed surface area is 1.7 m2, emissivity is 0.9, and surface temperature is 32°C. Determine the total rate of heat loss from that person by radiation and convection in a large room having walls at a temperature of 18oC. The convective heat transfer coefficient is 5 W/m2.K
(a) Calculate the rate of heat conduction (in W) through house walls that are 15.0 cm...
(a) Calculate the rate of heat conduction (in W) through house walls that are 15.0 cm thick and that have an average thermal conductivity twice that of glass wool. Assume there are no windows or doors. The surface area of the walls is 115 m2 and their inside surface is at 19.0°C, while their outside surface is at 5.00°C. W (b) How many 1 kW room heaters would be needed to balance the heat transfer due to conduction? (Round your...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT