Question

A string with a mass density of 3.6 ? 10-3 kg/m is under a tension of...

A string with a mass density of 3.6 ? 10-3 kg/m is under a tension of 370 N and is fixed at both ends. One of its resonance frequencies is 720 Hz. The next higher resonance frequency is 840 Hz.

(a) What is the fundamental frequency of this string?
______Hz

(b) Which harmonics have the given frequencies? (Enter 1 for the first harmonic, 2 for the second harmonic, etc.)

720 Hz
840 Hz


(c) What is the length of the string?
______m

Homework Answers

Answer #1

(a)

(Fundamental Frequency)

(b)

(720 Hz)

(840 Hz)

(c)

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A guitar string has a linear mass density of 0.004 kg/m, a tension of 100 N,...
A guitar string has a linear mass density of 0.004 kg/m, a tension of 100 N, and is supposed to have a fundamental frequency of 110 Hz. When a tuning fork of that frequency is sounded while the string is plucked, a beat frequency of 4 Hz is heard. The peg holding the string is loosened, decreasing the tension, and the beat frequency increases. Before it was loosened and while it still had a tension of 100 N, The frequency...
Standing waves on a 1.5-meter long string that is fixed at both ends are seen at...
Standing waves on a 1.5-meter long string that is fixed at both ends are seen at successive (that is, modes m and m + 1) frequencies of 38 Hz and 42 Hz respectively. The tension in the string is 720 N. What is the fundamental frequency of the standing wave? Hint: recall that every harmonic frequency of a standing wave is a multiple of the fundamental frequency. What is the speed of the wave in the string? What is the...
A guitar string has a linear mass density of 0.005 kg/m, a tension of 100 N,...
A guitar string has a linear mass density of 0.005 kg/m, a tension of 100 N, and is supposed to have a fundamental frequency of 110 Hz. When a tuning fork of that frequency is sounded while the string is plucked, a beat frequency of 2 Hz is heard. The peg holding the string is tightened, increasing the tension, and the beat frequency increases. Before it was tightened and while it still had a tension of 100 N, The frequency...
A transverse wave propagates in a very long wire of mass per unit length 4*10^-3 kg/m...
A transverse wave propagates in a very long wire of mass per unit length 4*10^-3 kg/m and under tension of 360 N. An observer next to the wire notices 10 wave peaks (or crests) passing her in a time of 2 seconds moving to the left. a) If at t=0 and x=0 the displacement assumes its maximum value of 1mm, what is the explicit equation for the wave? b) Calculate the maximum longitudinal velocity for an infinitesimal segment of the...
9. (a) A 1 m long string has a mass per unit length of 1.5×10−3 kg/m...
9. (a) A 1 m long string has a mass per unit length of 1.5×10−3 kg/m and is under a tension of 35 N. Find the first four harmonics of this string. (b) A given pipe is 1.5 m long. If the speed of sound through this pipe is 343 m/s, what are the frequencies of the first three harmonics of the pipe when it is: (i) open at both ends, (ii) open at only one end. 10. A truck...
A thin taut string of mass 5.00 g is fixed at both ends and stretched such...
A thin taut string of mass 5.00 g is fixed at both ends and stretched such that it has two adjacent harmonics of 525 Hz and 630 Hz. The speed of a traveling wave on the string is 168 m/s. (a) Determine which harmonic corresponds to the 630 Hz frequency. (b) Find the linear mass density of this string. (c) Find the tension in the string.
7a. Express the fundamental frequency of a piano wire fixed at both ends in terms of...
7a. Express the fundamental frequency of a piano wire fixed at both ends in terms of its tension FT, length L, radius r, and the 3D mass density ρ of the wire material. 7b. Given: radius r = 0.375 × 10-3 m, length L = 0.501 m, and ρsteel = 7.86 × 103 kg/m3. What is the tension required for a steel piano string tuned to middle C (f = 261.626 Hz)? 8.One of the harmonic frequencies of tube A...
Two violin strings each have a length of 0.32 m and are each under a tension...
Two violin strings each have a length of 0.32 m and are each under a tension of 51 N. The lighter string has a mass density of 6.43x10-4 kg/m, whereas the heavier string has a mass density of 2.48x10-3 kg/m. (Note, for stringed instruments, both ends of the string are fixed.) (a) What are the fundamental frequencies of the (i) lighter and (ii) heavier violin strings? (b) These strings are plucked simultaneously in such a way that the fundamental of...
a) A 1 meter long guitar string of linear mass density 2g/m3 is put under tension...
a) A 1 meter long guitar string of linear mass density 2g/m3 is put under tension until it resonates with a fundamental frequency of 440 Hz. Determine the tension that produces this fundamental frequency. Also determine the other of the first four harmonic frequencies and draw diagrams illustrating what each of these oscillations looks like on the string. b) This string will produce sound waves in the air, determine the wavelength of the sound waves. c) Suppose you had two...
A thin taut string of mass 5.00 g is fixed at both ends and stretched such...
A thin taut string of mass 5.00 g is fixed at both ends and stretched such that it has two adjacent harmonics of 525 Hz and 630 Hz. The speed of a traveling wave on the string is 168 m/s. PART A: Determine which harmonic corresponds to the 630 Hz frequency. PART B: Find the linear mass density of this string. Express your answer with the appropriate SI units. PART C: Find the tension in the string. Express your answer...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT