Question

A machinist wishes to insert an iron rod with a diameter of 2 mm into a...

A machinist wishes to insert an iron rod with a diameter of 2 mm into a hole with a diameter of 1.996 mm. By how much would the machinist have to lower the temperature (in °C) of the rod to make it fit the hole?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A machinist who specializes in electrical equipment is tasked with using 1.30 g of iron to...
A machinist who specializes in electrical equipment is tasked with using 1.30 g of iron to create a thin wire in the shape of a cylinder. The wire must have a resistance of R = 0.480 Ω. (a) How long should the wire be? (b) How wide (as in, diameter) should the wire be? mm [Note: This requests millimeters.]
A steel rod without constrain has a length of 200 mm and diameter of 20 mm...
A steel rod without constrain has a length of 200 mm and diameter of 20 mm at a temperature of 25oC. If the rod is heated uniformly to 125oC, what will be the length and diameter (accurate to 1/100 mm). What will be the stress at 125oC? The linear coefficient of thermal expansion of steel is 12.5x10-6 m/m/C.
A 1.70 mm cylindrical rod of diameter 0.550 cm is connected to a power supply that...
A 1.70 mm cylindrical rod of diameter 0.550 cm is connected to a power supply that maintains a constant potential difference of 13.0 V across its ends, while an ammeter measures the current through it. You observe that at room temperature (20.0 ∘C) the ammeter reads 18.5 A , while at 92.0 ∘C it reads 17.2 A . You can ignore any thermal expansion of the rod a).Find the resistivity and for the material of the rod at 20 ∘C...
A circular brass plug needs to pass through a square hole in an iron sheet. At...
A circular brass plug needs to pass through a square hole in an iron sheet. At room temperature (20◦C), the diameter of the plug is 8.755 cm and the length of each side of the square is 8.740 cm. At what temperature must the iron sheet be brought in order for the brass plug to fit through the square hole? The brass plug is not heated. The coefficient of linear expansion for iron is 12 × 10−6/◦C. (The answer is...
A metal rod that has a diameter of 1.0 cm and a length of 0.75 m...
A metal rod that has a diameter of 1.0 cm and a length of 0.75 m is stretched by 2.5 mm when subjected to a force of 115 kN (kilonewtons). Assuming that it remains in its elastic region, how much work would it take to compress this rod by 5.0 mm?
A spool of iron wire 230 m long and with a diameter of 0.480 mm is...
A spool of iron wire 230 m long and with a diameter of 0.480 mm is at 20.0°C. For iron, the resistivity is 10.0 ✕ 10−8 Ω · m and the temperature coefficient of resistivity is 5.00 ✕ 10−3 (°C)−1. (a) What is the magnitude of the electric field (in V/m) in the wire if it carries a current of 0.550 A? V/m (b) What is the electric power (in W) delivered to the spool while it carries a current...
A brass rod and a lead rod, each 0.250 mm long and each with cross-sectional area...
A brass rod and a lead rod, each 0.250 mm long and each with cross-sectional area 2.00×10−4m22.00×10−4m2, are joined end to end to make a composite rod of overall length 0.500 mm. The free end of the brass rod is maintained at a high temperature, and the free end of the lead rod is maintained at a low temperature. The temperature at the junction of the two rods is 185.0∘C∘C and the heat current due to conduction through the composite...
To determine the thermal conductivity of a long, 25.0 mm diameter cylindrical rod, one half of...
To determine the thermal conductivity of a long, 25.0 mm diameter cylindrical rod, one half of the rod was inserted into a furnace while the other half projected into air at 27.0 degrees C. After steady state had been reached, the temperatures at two points 76.0 mm apart were measured and were found to be 126 degrees C. and 91.0 degrees C. The convective heat transfer coefficient of the surface of the rod exposed to the air was 22.7 W/m^2...
A straight rod of solid polymer is of length 1 m and diameter 10 mm. The...
A straight rod of solid polymer is of length 1 m and diameter 10 mm. The polymer is linearly viscoelastic with a tensile creep compliance given by: D = 2- exp(-0.1t); Gpa^-1 Where t is in hours. The rod is suspended vertically and a mass of 10 kg is hung from it for 10 hours. Identify the time domain of this property test procedure.
Two students each build a piece of scientific equipment that uses a 555-mm-long metal rod. One...
Two students each build a piece of scientific equipment that uses a 555-mm-long metal rod. One student uses a brass rod, the other an invar rod. A. If the temperature increases by 5.0 ∘C∘C, how much more does the brass rod expand than the invar rod? Express your answer with the appropriate units.