Question

A tank with a large cross-sectional area contains motor oil of density 889kg/m^3 and a depth...

A tank with a large cross-sectional area contains motor oil of density 889kg/m^3 and a depth of 1.2m. The top of the tank is open to the atmosphere. A narrow horizontal pipe of radius 1.6mm and length 1.0m leaves the tank at the bottom. Determine the average speed of the oil flowing in the pipe if:

a) the viscosity of the oil is neglected

b) the viscosity (0.17Pas) is included

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
On another planet that you are exploring, a large tank is open to the atmosphere and...
On another planet that you are exploring, a large tank is open to the atmosphere and contains ethanol. A horizontal pipe of cross-sectional area 9.0×10−4m2 has one end inserted into the tank just above the bottom of the tank. The other end of the pipe is open to the atmosphere. The viscosity of the ethanol can be neglected. You measure the volume flow rate of the ethanol from the tank as a function of the depth h of the ethanol...
In a huge oil tanker, salt water has flooded an oil tank to a depth of...
In a huge oil tanker, salt water has flooded an oil tank to a depth of h2 = 4.85 m. On top of the water is a layer of oil h1 = 7.50 m deep, as in the cross-sectional view of the tank as shown in the figure. The oil has a density of 0.700 g/cm3. Find the pressure at the bottom of the tank. (Take 1,025 kg/m3 as the density of salt water.) Pa Calculate the pressure on the...
(a) A large, open at the top, upright cylindrical tank contains fuel oil with a density...
(a) A large, open at the top, upright cylindrical tank contains fuel oil with a density of 0.890 ✕ 103 kg/m3. If the air pressure is 101.3 kPa, determine the absolute pressure (in Pa) in the fluid at a depth of 22.5 m. ____ pa (b)Determine the force (in N) exerted by only the fluid on the window of an instrument probe at this depth if the window is circular and has a diameter of 3.70 cm. N
A closed and elevated vertical cylindrical tank with diameter 2.20 m contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 2.20 m contains water to a depth of 0.900 m . A worker accidently pokes a circular hole with diameter 0.0180 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity. Part A Just after the hole is made, what is the...
A closed and elevated vertical cylindrical tank with diameter 1.40 m contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 1.40 m contains water to a depth of 0.800 m . A worker accidently pokes a circular hole with diameter 0.0140 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity. Questions 1. How much time does it take for all the...
A large diameter closed top tank is filled with a depth of 3 meters of a...
A large diameter closed top tank is filled with a depth of 3 meters of a fluid (density 1200 kg/m3). A small pipe leading from the bottom of the tank must carry the fluid some height above the fluid level in the tank. a) If a pressure of 2.5 Atmospheres is maintained in the space above the fill line in the tank how high above the fill line can the pipe carry the fluid and still provide an exit speed...