Question

A uniform disk with mass m = 9.07 kg and radius R = 1.36 m lies in the x-y plane and centered at the origin. Three forces act in the +y-direction on the disk: 1) a force 313 N at the edge of the disk on the +x-axis, 2) a force 313 N at the edge of the disk on the –y-axis, and 3) a force 313 N acts at the edge of the disk at an angle θ = 31° above the –x-axis.

1)

What is the x-component of the net torque about the z axis on the disk?

N-m

2)

What is the y-component of the net torque about the z axis on the disk?

N-m

3)

What is the z-component of the net torque about the z axis on the disk?

N-m

4)

What is the magnitude of the angular acceleration about the z axis of the disk?

rad/s^{2}

Answer #1

A uniform disk with mass m = 8.88 kg and radius R = 1.3 m lies
in the x-y plane and centered at the origin. Three forces act in
the +y-direction on the disk: 1) a force 334 N at the edge of the
disk on the +x-axis, 2) a force 334 N at the edge of the disk on
the –y-axis, and 3) a force 334 N acts at the edge of the disk at
an angle θ =...

A uniform disk with mass m = 9.11 kg and radius R = 1.37 m lies
in the x-y plane and centered at the origin. Three forces act in
the +y-direction on the disk:
1) a force 319 N at the edge of the disk on the +x-axis, 2) a
force 319 N at the edge of the disk on the –y-axis, and 3) a force
319 N acts at the edge of the disk at an angle θ =...

A uniform disk with mass m = 8.63 kg and radius
R = 1.38 m lies in the x-y plane and centered at the origin. Three
forces act in the +y-direction on the disk: 1) a force 347 N at the
edge of the disk on the +x-axis, 2) a force 347 N at the edge of
the disk on the

A solid disk with a c of 1/2, mass of 2 kg, and radius of 1.5
meters lies on a horizontally (so the normal force and weight can
be ignored). A force of 8 Newtons is applied 0.2 meters directly to
the right of center in the +x direction, a force of 20 Newtons is
applied 0.7 meters directly below of center in the +x direction,
and a force of 7 Newtons is applied at the edge of the disk...

A uniform disk of mass Mdisk = 4 kg and radius R =
0.24 mhas a small block of mass mblock = 2.2 kg on its
rim. It rotates about an axis a distance d = 0.16 m from its center
intersecting the disk along the radius on which the block is
situated.
What is the moment of inertia of the block about the rotation
axis?
What is the moment of inertia of the disk about the rotation
axis?
When...

A 10.30-m ladder with a mass of 22.6 kg lies flat on the ground.
A painter grabs the top end of the ladder and pulls straight upward
with a force of 258 N. At the instant the top of the ladder leaves
the ground, the ladder experiences an angular acceleration of 1.66
rad/s2 about an axis passing through the bottom end of the ladder.
The ladder's center of gravity lies halfway between the top and
bottom ends.
(a) What is...

A 8.89 -m ladder with a mass of 24.4 kg lies flat on the ground.
A painter grabs the top end of the ladder and pulls straight upward
with a force of 235 N. At the instant the top of the ladder leaves
the ground, the ladder experiences an angular acceleration of 1.93
rad/s2 about an axis passing through the bottom end of the ladder.
The ladder's center of gravity lies halfway between the top and
bottom ends. (a) What...

A 9.19 -m ladder with a mass of 24.9 kg lies flat on the ground.
A painter grabs the top end of the ladder and pulls straight upward
with a force of 268 N. At the instant the top of the ladder leaves
the ground, the ladder experiences an angular acceleration of 1.72
rad/s2 about an axis passing through the bottom end of the ladder.
The ladder's center of gravity lies halfway between the top and
bottom ends. (a) What...

A solid uniform disk of mass M = 9.6 kg and radius R = 21 cm
rests with its flat surface on a frictionless table (i.e., the axis
of the cylinder is perpendicular to the table.) The diagram shows a
top view. A string is wrapped around the rim of the disk and a
constant force of F = 10.8 N is applied to the string. The string
does not slip on the rim.
1)
What is the acceleration of...

A uniform disk of radius 0.529 m and unknown mass is constrained
to rotate about a perpendicular axis through its center. A ring
with same mass as the disk\'s is attached around the disk\'s rim. A
tangential force of 0.223 N applied at the rim causes an angular
acceleration of 0.103 rad/s2. Find the mass of the disk.

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 9 minutes ago

asked 16 minutes ago

asked 50 minutes ago

asked 52 minutes ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 2 hours ago

asked 2 hours ago

asked 2 hours ago

asked 2 hours ago