Question

A fish has been hooked and is pulling on the line as shown in the figure...

A fish has been hooked and is pulling on the line as shown in the figure below.

If the pole makes an angle of 25° with the horizontal, the distance between the point where the line is attached to the pole and the anglers hand is

L = 2.05 m,

and the fish pulls on the line such that the tension in the line is

T = 118 N

at an angle 35.0° below the horizontal, determine the magnitude (in N · m) of the torque exerted by the fish about an axis perpendicular to the page and passing through the angler's hand.

N · m

Homework Answers

Answer #1

given

pole makes an angle of 25° with the horizontal

L = 2.05 m

T = 118 N

at an angle 35.0° below the horizontal

the angle perpendicular angle is = 90 - 25 - 35

= 90 - 60

= 30o

the magnitude of the torque exerted by the fish is = T cos x L

= 118 x cos30 x 2.05

= 209.491 N-m

so the magnitude of the torque exerted by the fish is = 209.491 N-m

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The fishing pole in the figure below makes an angle of 20.0° with the horizontal. What...
The fishing pole in the figure below makes an angle of 20.0° with the horizontal. What is the magnitude of the torque exerted by the fish about an axis perpendicular to the page and passing through the angler's hand if the fish pulls on the fishing line with a force = 122 N at an angle 37.0° below the horizontal? The force is applied at a point L = 1.94 m from the angler's hands
The figure below shows a person fishing with a fishing rod that makes an angle of...
The figure below shows a person fishing with a fishing rod that makes an angle of 20.0° above the horizontal. The distance from the person's hand to the tip of the rod is L = 2.04 m. A fish is on the line, and it pulls the line with a force of F = 121 N at an angle 37.0° below the horizontal. What is the magnitude of the torque (in N · m) exerted by the fish about an...
You hold a 1.80-N softball in your hand as shown in the figure. Consider your forearm...
You hold a 1.80-N softball in your hand as shown in the figure. Consider your forearm and hand to be a uniform rod with a mass of 1.85 kg and the distance between the elbow joint and the ball in your hand is 2L = 22.5 cm. Your biceps exerts an upward force of 12.0 N on the forearm and is attached at a distance of d = 2.20 cm from the elbow. (a) Using the elbow joint as the...
A block with mass m = 5.00kg slides down a surface inclined 36.9 ? to the...
A block with mass m = 5.00kg slides down a surface inclined 36.9 ? to the horizontal (the figure (Figure 1) ). The coefficient of kinetic friction is 0.24. A string attached to the block is wrapped around a flywheel on a fixed axis at O. The flywheel has mass 25.0kg and moment of inertia 0.500 kg?m2 with respect to the axis of rotation. The string pulls without slipping at a perpendicular distance of 0.200m from that axis. Part A...
The helicopter view in the figure below shows two people pulling on a stubborn mule. (Take...
The helicopter view in the figure below shows two people pulling on a stubborn mule. (Take F1 = 145 N and F2 = 75.0 N. ) An illustration shows the helicopter view of a mule being pulled along a forked road in two directions by two men. An x y coordinate system is overlaid on the image, with the origin at the mule's nose, and the mule facing in the positive y-direction. The man on the right is pulling the...
Two children hang by their hands from the same tree branch. The branch is straight, and...
Two children hang by their hands from the same tree branch. The branch is straight, and grows out from the tree trunk at an angle of 27.0° above the horizontal. One child, with a mass of 43.0 kg, is hanging 1.00 m along the branch from the tree trunk. The other child, with a mass of 35.0 kg, is hanging 2.20 m from the tree trunk. What is the magnitude of the net torque exerted on the branch by the...
A uniform drawbridge must be held at a 35.0 ∘ angle above the horizontal to allow...
A uniform drawbridge must be held at a 35.0 ∘ angle above the horizontal to allow ships to pass underneath. The drawbridge weighs 4.65×104 N , is 18.5 m long, and pivots about a hinge at its lower end. A cable is connected 3.75 m from the hinge, as measured along the bridge, and pulls horizontally on the bridge to hold it in place. Tension of cable: 1.64x105 N Magnitude of the force of the hinge exerted on the bridge:...
In the figure, a uniform beam with a weight of 56.9 N and a length of...
In the figure, a uniform beam with a weight of 56.9 N and a length of 3.75 m is hinged at its lower end, and a horizontal force  of magnitude 58.2 N acts at its upper end. The beam is held vertical by a cable that makes angle θ = 20.8° with the ground and is attached to the beam at height h = 2.04 m. What are (a) the tension in the cable, (b) the x-component of the force on...
As shown in the figure below, two masses m1 = 4.60 kg and m2 which has...
As shown in the figure below, two masses m1 = 4.60 kg and m2 which has a mass 75.0% that of m1, are attached to a cord of negligible mass which passes over a frictionless pulley also of negligible mass. If m1 and m2 start from rest, after they have each traveled a distance h = 2.80 m, use energy content to determine the following.             (a) speed v of the masses: Ans 2.8 m/s             (b) magnitude of the...
The figure below shows an electron passing between two charged metal plates that create an 85...
The figure below shows an electron passing between two charged metal plates that create an 85 N/C vertical electric field perpendicular to the electron’s original horizontal velocity. (These can be used to change the electron’s direction, such as in an oscilloscope.) The initial speed of the electron is 2.60×106 m/s, and the horizontal distance it travels in the uniform field is 4.30 cm. What is its vertical deflection? What is the vertical component of its final velocity? At what angle...