Question

In a huge oil tanker, salt water has flooded an oil tank to a depth of...

In a huge oil tanker, salt water has flooded an oil tank to a depth of h2 = 4.85 m. On top of the water is a layer of oil h1 = 7.50 m deep, as in the cross-sectional view of the tank as shown in the figure. The oil has a density of 0.700 g/cm3. Find the pressure at the bottom of the tank. (Take 1,025 kg/m3 as the density of salt water.)

Pa

Calculate the pressure on the top lid of a chest buried under 4.40 meters of mud with density 1.75 103 kg/m3 at the bottom of a 10.5-m-deep lake.

Pa

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
QUESTION Why does air pressure decrease with increasing altitude? (Select all that apply.) A) The weight...
QUESTION Why does air pressure decrease with increasing altitude? (Select all that apply.) A) The weight of the air above is smaller. B) Colder air is less dense. C) The weight of the air below is smaller. D) Less air above pushes down. E) There is more air below to push up more strongly. F) Hot air rises. PRACTICE IT Use the worked example above to help you solve this problem. In a huge oil tanker, salt water has flooded...
A tank is filled with 8m water (density water = 1000 kg/m^3) and 2 m oil...
A tank is filled with 8m water (density water = 1000 kg/m^3) and 2 m oil (density oil = 900 kg/ m^3).Flow is discharged at the bottom from a circular exit section with 5 mm diamter. Ignoring all frictional effects, determine the a) Velocity in exit section if the top tank pressure is atmospheric b) Flow rate in exit section if the top tank pressure is -25 kPa vacuum.
A barrel contains a 0.105-m layer of oil floating on water that is 0.275 m deep....
A barrel contains a 0.105-m layer of oil floating on water that is 0.275 m deep. The density of the oil is 630 kg/m3 a) What is the gauge pressure at the oil-water interface? b) What is the gauge pressure at the bottom of the barrel?
A tank with a large cross-sectional area contains motor oil of density 889kg/m^3 and a depth...
A tank with a large cross-sectional area contains motor oil of density 889kg/m^3 and a depth of 1.2m. The top of the tank is open to the atmosphere. A narrow horizontal pipe of radius 1.6mm and length 1.0m leaves the tank at the bottom. Determine the average speed of the oil flowing in the pipe if: a) the viscosity of the oil is neglected b) the viscosity (0.17Pas) is included
(a) A large, open at the top, upright cylindrical tank contains fuel oil with a density...
(a) A large, open at the top, upright cylindrical tank contains fuel oil with a density of 0.890 ✕ 103 kg/m3. If the air pressure is 101.3 kPa, determine the absolute pressure (in Pa) in the fluid at a depth of 22.5 m. ____ pa (b)Determine the force (in N) exerted by only the fluid on the window of an instrument probe at this depth if the window is circular and has a diameter of 3.70 cm. N
1. The three tanks shown above are filled with water to an equal depth. All the...
1. The three tanks shown above are filled with water to an equal depth. All the tanks have an equal height. Tank A has the least surface area at the bottom, tank B has the greatest and tank C has the middle area at the bottom. (Select T-True, F-False, G-Greater than, L-Less than, E-Equal to. If the first is F the second L and the rest G, enter FLGGGG). A) The total force exerted by the water on the bottom...
A closed and elevated vertical cylindrical tank with diameter 80 cm contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 80 cm contains water to a depth of 0.900 m . A worker opens a circular hole with diameter 12 cm in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity ( ½w = 1000 kg=m3 ). a) (12 points) Just after the...
An aquarium tank is 1400m tall and has a cross sectional area of 1m x1m. The...
An aquarium tank is 1400m tall and has a cross sectional area of 1m x1m. The seawater used has a density of 1040 kg/m^3 and a compressibility of β = 1.2 X 10^-9 Pa^-1. Each day you need to test a sample from the bottom of the tank for the presence of ecoli and arsenic. You are given a sample bottle that holds 650 mL of fluid. a. What is the change in pressure, dp, that will be experienced by...
Mercury is added to a cylindrical container to a depth d and then the rest of...
Mercury is added to a cylindrical container to a depth d and then the rest of the cylinder is filled with water. If the cylinder is 0.8 m tall and the absolute (or total) pressure at the bottom is 1.1 atmospheres, determine the depth of the mercury. (Assume the density of mercury to be 1.36 104 kg/m3, and the ambient atmospheric pressure to be 1.013e5 Pa) ____m This is my FOURTH time submitting this question. The answer IS NOT .018...
A cylindrical tank of cross-sectional area equal to A has one inlet where water is flowing...
A cylindrical tank of cross-sectional area equal to A has one inlet where water is flowing in, and no exits. The mass flow rate going into the tank is represented with. The height ?of the water inside the tank is represented by L, which is increasing with time. a. Use the general conservation of mass equation to show that the following equation is true for this problem (assuming that density varies with time):1??/???+1??/???=?/???. Include all steps. b. For the same...