Question

In a hydraulic press, the large piston of cross-sectional area A1 = 200 cm2 and the...

In a hydraulic press, the large piston of cross-sectional area A1 = 200 cm2 and the small piston has the cross-sectional area A2 = 5 cm2. If a force of 250 N is applied to the small piston, what is the magnitude of force F on the large piston?

a. 10 N

b. 1000 dyn

c. 1000 N

d. 10 kN

Homework Answers

Answer #1

This song problem is based on Pascal Law.

Please comment if you have any doubts...

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The small piston of a hydraulic lift (see figure below) has a cross-sectional area of 2.70...
The small piston of a hydraulic lift (see figure below) has a cross-sectional area of 2.70 cm2, and its large piston has a cross-sectional area of 199 cm2. What downward force of magnitude F1 must be applied to the small piston for the lift to raise a load whose weight is Fg = 14.0 kN?
A piston of small cross-sectional area a is used to exert a small force f on...
A piston of small cross-sectional area a is used to exert a small force f on the enclosed liquid. A connecting pipe leads to a larger piston of cross-sectional area A which can then support a large force. If the small piston has a diameter of 1.8 in and the large piston one of 108.0 in, what mass on the small piston will support 29.1 metric tons on the large piston? (1 metric ton = 1000 kg)
A hydraulic lift has 2 connected pistons with cross-sectional areas 20 cm2 and 680 cm2. It...
A hydraulic lift has 2 connected pistons with cross-sectional areas 20 cm2 and 680 cm2. It is filled with oil of density 710 kg/m3. What mass must be placed on the small piston to support a car of mass 1400 kg at equal fluid levels? m = With the lift in balance with equal fluid levels, a person of mass 90 kg gets into the car. What is the equilibrium height difference in the fluid levels in the pistons? Δh...
A bone in a woman's leg has an effective cross‑sectional area of 3.34 cm2. If the...
A bone in a woman's leg has an effective cross‑sectional area of 3.34 cm2. If the bone is 32.1 cm long, how much longitudinal compressive force ?max can it withstand before breaking? ?max= N How much will her bone compress Δ? if it is subjected to a force one‑tenth the magnitude of the force that breaks it? The longitudinal elastic modulus of human bone is about 9.60×109 N/m2. Give an answer in units of centimeters (cm).
A very long, straight solenoid with a cross-sectional area of 2.12 cm2 is wound with 91.6...
A very long, straight solenoid with a cross-sectional area of 2.12 cm2 is wound with 91.6 turns of wire per centimeter. Starting at t = 0, the current in the solenoid is increasing according to i(t)= ( 0.180 A/s2 )t2. A secondary winding of 5 turns encircles the solenoid at its center, such that the secondary winding has the same cross-sectional area as the solenoid. What is the magnitude of the emf induced in the secondary winding at the instant...
A very long, straight solenoid with a cross-sectional area of 2.06 cm2 is wound with 92.1...
A very long, straight solenoid with a cross-sectional area of 2.06 cm2 is wound with 92.1 turns of wire per centimeter. Starting at t = 0, the current in the solenoid is increasing according to i(t)= ( 0.178 A/s2 )t2. A secondary winding of 5 turns encircles the solenoid at its center, such that the secondary winding has the same cross-sectional area as the solenoid. Q1: What is the magnitude of the emf induced in the secondary winding at the...
A very long, straight solenoid with a cross-sectional area of 1.97 cm2 is wound with 94.6...
A very long, straight solenoid with a cross-sectional area of 1.97 cm2 is wound with 94.6 turns of wire per centimeter. Starting at t = 0, the current in the solenoid is increasing according to i(t)= ( 0.160 A/s2 )t2. A secondary winding of 5 turns encircles the solenoid at its center, such that the secondary winding has the same cross-sectional area as the solenoid. a.What is the magnitude of the emf induced in the secondary winding at the instant...
A piston-cylinder apparatus contains 4 kg of saturated liquid water at 35˚C. The piston’s cross sectional...
A piston-cylinder apparatus contains 4 kg of saturated liquid water at 35˚C. The piston’s cross sectional area is 0.06 m2 , and initially it is resting on stops, enclosing a volume of 0.03 m3 . To raise the piston, a pressure of 300kPa has to be applied. Heat is transferred until the volume is 0.075 m3 , at which point the piston encounters a linear spring. To deflect the spring 1 m, a force of 360 kN is required. More...
1.A hydraulic lift is lifting a car that weighs 14 kN. The area of the piston...
1.A hydraulic lift is lifting a car that weighs 14 kN. The area of the piston supporting the car is A, the area of the other piston is a, and the ratio A/a is 101.7. How far must the small piston be pushed down to raise the car a distance of 1.2 cm 2.The pressure inside a bottle of champagne is 4.8 atm higher than the air pressure outside. The neck of the bottle has an inner radius of 0.9...
A bar of some material has a cross sectional area of A and an original length...
A bar of some material has a cross sectional area of A and an original length of L. A tensile force of F is applied to the bar, producing a deformation of ΔL. A bar with the same original length but with twice the cross sectional area has the same force of F applied to it. The deformation of the second bar is Group of answer choices 0.5 (ΔL) 0.25 (ΔL) ΔL 2 (ΔL) 4 (ΔL)