Question

A uniform 29 kg door that is 2.2 m high by 1.00 m wide is hung...

A uniform 29 kg door that is 2.2 m high by 1.00 m wide is hung from two hinges that are 20 cm from the top and 20 cm from the bottom. If each hinge supports half the weight of the door, find the magnitude and direction of the horizontal components of the forces exerted by the two hinges on the door. (Take the direction of forcing the door away from the hinges to be positive and the direction of forcing the door toward the hinges to be negative.)
……. N (upper hinge)
   ……. N (lower hinge)

Homework Answers

Answer #1

force on uppar hinge is 79.025N toward left side aa shown

Force on buttom hinge is 79.025 N towards right side as shown. Hope you got the concept. Please upvote. Thanks

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A uniform door (0.79 m wide and 2.0 m high) weighs 113 N and is hung...
A uniform door (0.79 m wide and 2.0 m high) weighs 113 N and is hung on two hinges that fasten the long left side of the door to a vertical wall. The hinges are 2.0 m a part. Assume that the lower hinge bears all the weight of the door. Find the horizontal component of the forces, including sign, applied to the door by (a) the upper hinge and (b) the lower hinge, taking the direction to the right...
The hinges of a uniform door which weighs 200N are 2.5m apart. One hinge is a...
The hinges of a uniform door which weighs 200N are 2.5m apart. One hinge is a distance d from the top of the door, while the other is a distance d from the bottom. The door is 1.0m wide. The weight of the door is supported by the lower hinge. Determine the forces exerted by the hinges on the door. (Ans: The horizontal force at the upper hinge is 40N. The force at the lower hinge is 200N at 79deg...
A farm gate (Fig. P12.44) is 3.00 m wide and 1.80 m high, with hinges attached...
A farm gate (Fig. P12.44) is 3.00 m wide and 1.80 m high, with hinges attached to the top and bottom. The guy wire makes an angle of 30.0° with the top of the gate and is tightened by a turnbuckle to a tension of 200 N. The mass of the gate is 40.0 kg. (Assume that the positive directions are upward and to the right.) Find the horizontal force exerted by the upper hinge. What if? What must be...
A 0.00600 kg bullet traveling horizontally with speed 1.00 103 m/s strikes a 21.4 kg door,...
A 0.00600 kg bullet traveling horizontally with speed 1.00 103 m/s strikes a 21.4 kg door, embedding itself 11.3 cm from the side opposite the hinges as shown in the figure below. The 1.00 m wide door is free to swing on its frictionless hinges. A door shown from above such that its hinge is on the top side of the figure with the door going down. A bullet is traveling horizontally to the right towards the door on the...
A 560-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a...
A 560-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal, 6.00-m-long, uniform, 120-N rod as indicated in the figure below. The left end of the rod is supported by a hinge and the right end is supported by a thin cable making a 30.0° angle with the vertical. (Assume the cable is connected to the very end of the 6.00-m-long rod, and that there are 2.00 m separating the wall from the sign.)...
A 0.005 kg bullet traveling horizontally with speed 1.00 x 103 m/s strikes an 18.0-kg door,...
A 0.005 kg bullet traveling horizontally with speed 1.00 x 103 m/s strikes an 18.0-kg door, embedding itself 10.0 cm from the side opposite the hinges. The 1.00 m wide door is free to swing on its frictionless hinges. A) What is the bullet’s initial angular momentum relative to the door’s axis of rotation? B)At what angular speed does the door swing open immediately after the collision?
A 19.3 kg door that is 1.19 m wide opens slowly as a pull of constant...
A 19.3 kg door that is 1.19 m wide opens slowly as a pull of constant magnitude 48.5 N is exerted on the doorknob. This applied force, which is always perpendicular to the door, is necessary to balance the frictional torque in the hinges. How large must an applied force of constant magnitude be in order to open the door through an angle of 90.0° in 0.517 s?
The gate in the figure below, which is 2.00 m wide and 1.00 m tall, is...
The gate in the figure below, which is 2.00 m wide and 1.00 m tall, is supported by hinges and a guy wire. Find the torque resulting from each of the following forces about an axis through point P. (Torque is positive if its direction is counterclockwise and negative if its direction is clockwise.) F1 = 68.9 N F2 = 78.5 N F3 = 168 N F4 = 112 N Figure seen here: http://imgur.com/Dy4MMV7
A 0.00400-kg bullet traveling horizontally with speed 1.00 103 m/s strikes a 20.0-kg door, embedding itself...
A 0.00400-kg bullet traveling horizontally with speed 1.00 103 m/s strikes a 20.0-kg door, embedding itself 10.9 cm from the side opposite the hinges as shown in the figure below. The 1.00-m wide door is free to swing on its frictionless hinges. (a) Before it hits the door, does the bullet have angular momentum relative the door's axis of rotation? Yes No (b) If so, evaluate this angular momentum. (If not, enter zero.) kg · m2/s If not, explain why...
A 0.00400-kg bullet traveling horizontally with speed 1.00 103 m/s strikes a 17.7-kg door, embedding itself...
A 0.00400-kg bullet traveling horizontally with speed 1.00 103 m/s strikes a 17.7-kg door, embedding itself 10.2 cm from the side opposite the hinges as shown in the figure below. The 1.00-m wide door is free to swing on its frictionless hinges. (a) Before it hits the door, does the bullet have angular momentum relative the door's axis of rotation? Yes No (b) If so, evaluate this angular momentum. (If not, enter zero.) kg · m2/s If not, explain why...