Question

A mass m = 12 kg is pulled along a horizontal floor with NO
friction for a distance d =7.2 m. Then the mass is pulled up an
incline that makes an angle θ = 30° with the horizontal and has a
coefficient of kinetic friction μ_{k} = 0.49. The entire
time the massless rope used to pull the block is pulled parallel to
the incline at an angle of θ = 30° (thus on the incline it is
parallel to the surface) and has a tension T =61 N.

1)What is the work done by tension before the block goes up the incline? (On the horizontal surface.)

2)What is the speed of the block right before it begins to travel up the incline?

3)What is the work done by friction after the block has traveled a distance x = 3.5 m up the incline? (Where x is measured along the incline.)

4)What is the work done by gravity after the block has traveled a distance x = 3.5 m up the incline? (Where x is measured along the incline.)

5)How far up the incline does the block travel before coming to rest? (Measured along the incline.)

Answer #1

A mass m = 12 kg is pulled along a horizontal floor with NO
friction for a distance d =7.2 m. Then the mass is pulled up an
incline that makes an angle θ = 30° with the horizontal and has a
coefficient of kinetic friction μk = 0.49. The entire
time the massless rope used to pull the block is pulled parallel to
the incline at an angle of θ = 30° (thus on the incline it is
parallel...

A mass m = 13 kg is pulled along a horizontal floor, with a
coefficient of kinetic friction μk = 0.07, for a
distance d = 5.1 m. Then the mass is continued to be pulled up a
frictionless incline that makes an angle θ = 33° with the
horizontal. The entire time the massless rope used to pull the
block is pulled parallel to the incline at an angle of θ = 33°
(thus on the incline it is...

A 6.53-kg block initially at rest is pulled to the right along a
horizontal surface by a constant force of 125 N applied at an angle
θ above the horizontal. The coefficient of kinetic friction between
the block and the horizontal surface is 0.150. At what angle θ
above the horizontal surface should the force be applied to achieve
the largest possible speed after the block has moved 5.00 m to the
right?

A crate of mass 10.6 kg is pulled up a rough incline with an
initial speed of 1.52 m/s. The pulling force is 94 N parallel to
the incline, which makes an angle of 20.2° with the horizontal. The
coefficient of kinetic friction is 0.400, and the crate is pulled
4.94 m.
(a) How much work is done by the gravitational force on the
crate?
(b) Determine the increase in internal energy of the crate–incline
system owing to friction.
(c)...

A block of mass m = 4.5 kg is attached to a spring with
spring constant k = 610 N/m. It is initially at rest on an
inclined plane that is at an angle of θ = 29° with respect
to the horizontal, and the coefficient of kinetic friction between
the block and the plane is μk = 0.13. In the
initial position, where the spring is compressed by a distance of
d = 0.19 m, the mass is at...

A box with a mass of 7.01 kg is sliding along a horizontal
surface at constant velocity. It is pulled by a horizontal force
and the coefficient of kinetic friction between the box and the
surface is 0.375.
Part (a) What is the work done, in joules, by
the pulling force as the box moves a distance of 0.495 m?
Part (b) What is the work done, in joules, by
the force of friction 33% Part (c) What is the...

A 6.0-kg block initially at rest is pulled to the right along a
horizontal surface with a force of 12 N. The force of kinetic
friction is 3N.
a. Draw a free-body diagram of the situation.
b. Find the work done by the 12 N force on the block to move the
block 3m?
c. Find the work done by the force of friction on the block when
the block was moved 3m?
d. Use the work-energy principle to find...

An object of mass m = 20.0 kg travels distance
d = 60.0 m at constant speed on a rough horizontal surface
(μk = 0.45). The force (a pull, not a push)
applied to the object makes an angle θ = 30.0∘with the
horizontal. Calculate:
A:The magnitude of the applied force?
B:The work done by the applied force?
C:The work done by the force of friction?

A crate of mass 9.6 kg is pulled up a rough incline with an
initial speed of 1.40 m/s. The pulling force is 98 N parallel to
the incline, which makes an angle of 19.5° with the horizontal. The
coefficient of kinetic friction is 0.400, and the crate is pulled
4.98 m.
(a) How much work is done by the gravitational force on the
crate?
J
(b) Determine the increase in internal energy of the crate–incline
system owing to friction....

A crate of mass 9.6 kg is pulled up a rough incline with an
initial speed of 1.52 m/s. The pulling force is 104 N parallel to
the incline, which makes an angle of 20.4° with the horizontal. The
coefficient of kinetic friction is 0.400, and the crate is pulled
4.92 m.
(a) How much work is done by the gravitational force on the
crate?
J
(b) Determine the increase in internal energy of the crate–incline
system owing to friction....

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 11 minutes ago

asked 15 minutes ago

asked 18 minutes ago

asked 27 minutes ago

asked 33 minutes ago

asked 47 minutes ago

asked 57 minutes ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago