Question

A hose for firefighters has an inner diameter of 8.0 cm. The pressure inside the hose...

A hose for firefighters has an inner diameter of 8.0 cm. The pressure inside the hose is 380 kPa higher than the air pressure. The nozzle at the end of the hose has an inner diameter of 3.50 cm.

a) What is the velocity with which the water leaves the nozzle?

b) How many liter water per second leaves the hose?

Use 1.00·10^3 kg/m3 as density for water

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The hose has a diameter of 2.5 cm, but the nozzle has a diameter of only...
The hose has a diameter of 2.5 cm, but the nozzle has a diameter of only 1.10 cm. The water that comes out of the hose fills a container of 25 Len 1.50 min. Calculate: a- the volume flow flowing through the hose b- the velocity of the water leaving the nozzle c- if the pressure external to the hose is atmospheric, what is the absolute pressure of the water inside the hose?
A long horizontal hose of diameter 3.8 cm is connected to a faucet. At the other...
A long horizontal hose of diameter 3.8 cm is connected to a faucet. At the other end, there is a nozzle of diameter 1 cm. Water squirts from the nozzle at velocity 18 m/sec. Assume that the water has no viscosity or other form of energy dissipation. 1) What is the velocity of the water in the hose ? m/s 2) What is the pressure differential between the water in the hose and water in the nozzle ? Pa 3)...
A 2.54 cm inner diameter hose is connected to a freshwater pump with a gauge pressure...
A 2.54 cm inner diameter hose is connected to a freshwater pump with a gauge pressure of 3.65 atm. The volume flow rate at the pump is 2.50 gal/min. The other end of the hose is held at an angle of 300 above the horizontal at a height of 1.20 m. Determine the velocity of the water as it exits the hose. Determine the inner diameter of the hose as the water exits the hose. Determine the horizontal distance from...
a water hose with a diameter of 2.5 cm is attached to a hydrant, and the...
a water hose with a diameter of 2.5 cm is attached to a hydrant, and the gauge pressure at the hydrant is 312 kpa. at the end if the hose , there is a nozzle with diameter of 6.8 mm. if the nozzle is at the same height as the hydrant, what is the speed of the water spray out if the nozzle?
A long horizontal hose of diameter 3.6 cm is connected to a faucet. At the other...
A long horizontal hose of diameter 3.6 cm is connected to a faucet. At the other end, there is a nozzle of diameter 1.8 cm. Water squirts from the nozzle at velocity 16 m/sec. Assume that the water has no viscosity or other form of energy dissipation. 1)What is the velocity of the water in the hose ? 2)What is the pressure differential between the water in the hose and water in the nozzle ? 3) How long will it...
. The nozzle of a garden hose is shown to the right. The hose has a...
. The nozzle of a garden hose is shown to the right. The hose has a v1 v2 diameter of 2.5 cm, and the opening on the right has a diameter of 0.75 cm. The water emerges from the opening to the air, so it is at atmospheric pressure. If the speed of the water at the opening v2 is 15 m/s, A) What volume of water emerges from the hose every minute? (Express your answer in gallons, where 1...
2 parts! thanks :) 1. A water pipe with an inner diameter of 2.5 cm carries...
2 parts! thanks :) 1. A water pipe with an inner diameter of 2.5 cm carries water into the basement of a house at a speed of 0.88 m/s and a pressure of 180 kPa. If the pipe tapers to an inner diameter of 1.2 cm and rises to the second floor 7.2 m above the input level, what is the speed of the water flow at the second floor? Your answer should be in m/s, but enter only the...
(a) Calculate the absolute pressure at the bottom of a freshwater lake at a point whose...
(a) Calculate the absolute pressure at the bottom of a freshwater lake at a point whose depth is 28.4 m. Assume the density of the water is 1.00 103 kg/m3 and the air above is at a pressure of 101.3 kPa. (b) What force is exerted by the water on the window of an underwater vehicle at this depth if the window is circular and has a diameter of 32.2 cm?
Water flows at the rate of 3.48 kg/s through a hose with a diameter of 3.00...
Water flows at the rate of 3.48 kg/s through a hose with a diameter of 3.00 cm. (a) What is the speed of water in this hose? (b) If the hose is attached to a nozzle with a diameter of 0.750 cm, what is the speed of water in the nozzle? (c) Is the number of kilograms per second flowing through the nozzle greater than, less than, or equal to 3.48 kg/s? Help! My answers are wrong, heres what I...
A 2.0 cm -diameter venturi flowmeter is inserted in a 3.0 cm -diameter pipe carrying water...
A 2.0 cm -diameter venturi flowmeter is inserted in a 3.0 cm -diameter pipe carrying water (density =1000 kg/m3). The pressure difference between venturi and unconstricted pipe is 15 kPa. What is the flow speed in the pipe? What is the volume flow rate?