Question
A cylindrical metal can, 0.1 m high and 0.05 m in diameter, contains liquid helium at...
A cylindrical metal can, 0.1 m high and 0.05 m in diameter, contains liquid helium at its normal boiling point of -452.074 degree Fahrenheit. At this temperature Helium's heat of vaporization is 20.4 kJ/kg. The walls of the helium container are 1.2 cm thick and have a thermal conductivity of 13.889 W/(m K). The helium container is surrounded by liquid nitrogen at a temperature of -327.64 degrees Fahrenheit.
a) What is the conductive surface area of the metal cylinder?
b) What is the temperature of the liquid helium in Kelvin?
c) What is the temperature of the walls in Kelvin?
d) What is the rate of heat flow into the Helium due to conduction?
e) How much Helium is lost per hour due to conduction?
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
A cylindrical metal can, 0.1 m high and 0.05 m in diameter, contains liquid helium at...
A cylindrical metal can, 0.1 m high and 0.05 m in diameter,
contains liquid helium at its normal boiling point of -452.074
degrees Fahrenheit. At this temperature Helium's heat of
vaporization is 20.4 kJ/kg. The walls of the helium container are
1.2 cm thick and have a thermal conductivity of 13.889 W/(m K). The
helium container is surrounded by liquid nitrogen at a temperature
of -327.64 degrees Fahrenheit.
A. What is the conductive surface area of the metal
cylinder?
B....
A cylindrical metal can, 0.1 m high and 0.05 m in diameter, contains liquid helium at...
A cylindrical metal can, 0.1 m high and 0.05 m in diameter,
contains liquid helium at its normal boiling point of -452.074
degree Fahrenheit. At this temperature Helium's heat of
vaporization is 20.4 kJ/kg. The walls of the helium container are
1.2 cm thick and have a thermal conductivity of 13.889 W/(m K). The
helium container is surrounded by liquid nitrogen at a temperature
of -327.64 degrees Fahrenheit.
a) What is the conductive surface area of the metal
cylinder?
b)...
A physicist uses a cylindrical metal can 0.260 m high and 0.070 m in diameter to...
A physicist uses a cylindrical metal can 0.260 m high and 0.070
m in diameter to store liquid helium at 4.22 K; at that temperature
the heat of vaporization of helium is 2.09×104J/kg. Completely
surrounding the metal can are walls maintained at the temperature
of liquid nitrogen, 77.3 K, with vacuum between the can and the
surrounding walls.
A)How much helium is lost per hour? The emissivity of the metal
can is 0.200. The only heat transfer between the metal...
A physicist uses a cylindrical metal can 0.270 mm high and 0.090 mm in diameter to...
A physicist uses a cylindrical metal can 0.270 mm high and 0.090
mm in diameter to store liquid helium at 4.22 KK; at that
temperature the heat of vaporization of helium is
2.09×104J/kg2.09×104J/kg. Completely surrounding the metal can are
walls maintained at the temperature of liquid nitrogen, 77.3 KK,
with vacuum between the can and the surrounding walls.
How much helium is lost per hour? The emissivity of the metal
can is 0.200. The only heat transfer between the metal...
Liquid helium is stored at its boiling-point temperature of 4.2 K in a spherical container (r...
Liquid helium is stored at its boiling-point temperature of 4.2
K in a spherical container (r = 0.30 m). The container is a perfect
blackbody radiator. The container is surrounded by a spherical
shield whose temperature is 77 K. A vacuum exists in the space
between the container and the shield. The latent heat of
vaporization for helium is 2.1 x 104 J/ kg. What mass of
liquid helium boils away through a venting valve in one hour?
Temperatures of gases inside the combustion chamber of a four-stroke automobile engine can reach up to...
Temperatures of gases inside the combustion chamber of a
four-stroke automobile engine can reach up to 1000°C. To remove
this enormous amount of heat, the engine utilizes a closed
liquid-cooled system which relies on conduction to transfer heat
from the engine block into the liquid and then into the atmosphere
by flowing coolant around the outside surface of each cylinder.
Assume you have a 6-cylinder engine, and each cylinder has a
diameter of 9.00 cm and height of 11.6 cm...
A steel hot-water tank of cylindrical shape has an inside diameter of 0.600 m and inside...
A steel hot-water tank of cylindrical shape has an inside
diameter of 0.600 m and inside height of 1.40 m. The tank is
enclosed by a 5.00 cm thick insulating layer of glass wool whose
thermal conductivity is 0.0350 W / (m·K). The insulation is covered
by a thin sheet metal skin. The steel tank and the sheet metal skin
have thermal conductivities that are much greater than that of the
glass wool. How much electrical power (W) must be...
A cylindrical water tank 1.5 m in diameter and 2.5 m high is surrounded on both...
A cylindrical water tank 1.5 m in diameter and 2.5 m high is
surrounded on both ends and the sides with RSI =3 insulation. It is
desired to keep the water at 80 degrees C, while the ambient
temperature is 20 degrees C. WHat is the minimum RSI- value that is
required for the walls and roof?
Temperatures of gases inside the combustion chamber of a four‑stroke automobile engine can reach up to...
Temperatures of gases inside the combustion chamber of a
four‑stroke automobile engine can reach up to 1000 ∘C. To remove
this enormous amount of heat, the engine utilizes a closed
liquid‑cooled system that relies on conduction to transfer heat
from the engine block into the liquid and then into the atmosphere
by flowing coolant around the outside surface of each cylinder.
Suppose that, in a particular 6‑cylinder engine, each cylinder
has a diameter of 8.75 cm, a height of 11.0...
Temperatures of gases inside the combustion chamber of a four‑stroke automobile engine can reach up to...
Temperatures of gases inside the combustion chamber of a
four‑stroke automobile engine can reach up to 1000 ∘C. To remove
this enormous amount of heat, the engine utilizes a closed
liquid‑cooled system that relies on conduction to transfer heat
from the engine block into the liquid and then into the atmosphere
by flowing coolant around the outside surface of each cylinder.
Suppose that, in a particular 6‑cylinder engine, each cylinder
has a diameter of 8.25 cm, a height of 11.3...
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 7 minutes ago
asked 18 minutes ago
asked 35 minutes ago
asked 44 minutes ago
asked 44 minutes ago
asked 48 minutes ago
asked 57 minutes ago
asked 1 hour ago
asked 1 hour ago
asked 2 hours ago
asked 2 hours ago
asked 2 hours ago