Question

Two blocks are connected by a light string passing over a pulley. The inclined surfaces are frictionless, and the effects of the pulley can be ignored. The value of m1 = m2 = 1.0 kg and θ2 = 41.6 o. If the blocks accelerate to the right with acceleration a = 0.250 m/s2, what is the value of θ1?

Answer #1

The answer for above problem is explained below.

In the figure below the two blocks are connected by a string of
negligible mass passing over a frictionless pulley.
m1 = 10.0 kg and m2 = 5.50
kg and the angle of the incline is θ = 39.0°. Assume that
the incline is smooth. (Assume the +x direction is down
the incline of the plane.)
(a)
With what acceleration (in m/s2) does the mass
m2 move on the incline surface? Indicate the
direction with the sign of your answer....

Two blocks with masses M1 and M2 are connected by a massless
string that passes over a massless pulley as shown.
M1 has a mass of 2.25 kg and is on an incline of θ1=46.5∘ with
coefficient of kinetic friction μ1=0.205.
M2 has a mass of 6.05 kg and is on an incline of θ2=33.5∘ with
coefficient of kinetic friction μ2=0.105.
The two‑block system is in motion with the block of mass M2
sliding down the ramp.
Find the magnitude...

Two masses are connected by a light string passing over a light,
frictionless pulley as in Figure P5.63. The m1
= 4.75 kg object is released from rest at a point 4.00 m above the
floor, where the m2 = 3.20 kg object rests.
Please define all variables in solving
(a) Determine the speed of each object when the two pass each
other.
(b) Determine the speed of each object at the moment the 4.75 kg
mass hits the floor....

Two masses are connected by a light string passing over a
light, frictionless pulley, as shown in the figure below. The
object of mass m1 is released from rest at height h above the
table. Use the isolated system model to answer the following. (We
assume m1 > m2.)
(a) Determine the speed of m2 just as m1 hits the ground. (Use
any variable or symbol stated above along with the following as
necessary: g.)
v =
(b) Find the...

Two objects are connected by a light string that passes over a
frictionless pulley as shown in the figure below. Assume the
incline is frictionless and take m1 = 2.00 kg,
m2 = 7.90 kg, and ? = 55.5

A mass m1 is connected by a light string that passes
over a pulley of mass M to a mass m2 sliding on a
frictionless horizontal surface as shown in the figure. There is no
slippage between the string and the pulley. The pulley has a radius
of 25.0 cm and a moment of inertia of ½ MR2. If
m1 is 1.00 kg, m2 is 2.00 kg, and M is 4.00
kg, then what is the tension in the string...

Two masses are connected by a massless string and a frictionless
pulley. The masses of the blocks are; m1=500 g and m2= 150g. The
coefficiant of friction between m1 and the surface is 0.25. (a)
What is the acceleration of the masses? (b) What is the tension in
the string?

Two blocks (m1=5.5kg, m2=7.2kg
) are connected by a string that passes through a massless pulley
as shown in the Figure. The first block with mass
m1 slides up the inclined
plane when the system is released. The inclined plane makes an
angle θ = 310 with the
horizontal and the kinetic friction coefficient between the
inclined plane and m1 is
=0.35. Take g=10m/s2 Find
the speed of the block with mass m2 after it travels
h=5.6m.

Two blocks are positioned on surfaces, each inclined at the same
angle of 45.4 degrees with respect to the horizontal. The blocks
are connected by a rope which rests on a frictionless pulley at the
top of the inclines as shown, so the blocks can slide together. The
mass of the black block is 4.22 kg, and the coefficient of kinetic
friction for both blocks and inclines is 0.370. Assume static
friction has been overcome and that everything can slide....

Two blocks of mass m1 = 9.20 kg and m2 are connected by a light
string. When a horizontal force F = 105 N is applied to m1 as shown
in the figure below, the acceleration of the system is 3.20 m/s2
towards the left and the tension in the string connecting the two
blocks is 62.0 N. The blocks are moving on a rough surface with an
unknown coefficient of kinetic friction. Determine the coefficient
of kinetic friction between...

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 12 minutes ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 2 hours ago

asked 2 hours ago

asked 2 hours ago