Question

Find the impedance of the lowest or dominant mode of a rectangular waveguide filled with dielectric...

Find the impedance of the lowest or dominant mode of a rectangular waveguide filled with dielectric material with Er=9 and having dimensions a=1cm b=0.5cm , to be used at 20Ghz

Homework Answers

Answer #1

Solution

So

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A rectangular waveguide is to be constructed for single-mode operation at 3 GHz. The waveguide must...
A rectangular waveguide is to be constructed for single-mode operation at 3 GHz. The waveguide must be designed so that this operating frequency is 20% higher than the cutoff frequency of the lowest mode, and, at the same time, is 20% lower than the cutoff frequency of the next higher mode. The waveguide will be filled with a dielectric material with relative electrical permittivity of 2. Determine the cross-sectional dimensions, a and b, of the waveguide. Answer: 4.2 cm x...
determine the resonant of the dominant cavity mode for an air-filled rectangular waveguide cavity with dimension...
determine the resonant of the dominant cavity mode for an air-filled rectangular waveguide cavity with dimension of a=4cm, b=2cm and c=7cm
1. It is desired to design a rectangular waveguide that propagates only the lowest order mode...
1. It is desired to design a rectangular waveguide that propagates only the lowest order mode TE10 and operates at 10 GHz. If the waveguide is air filled, determine the waveguide dimensions (a and b) such that the desired operating frequency is 38% above the cutoff frequency of the TE10 mode. Although the dimension b of waveguide is often taken as b=a/2, for attenuation considerations and also to improve the waveguide power handling capacity, it is desired to design a...
A TM wave propagating in a dielectric filled waveguide of unknown permittivity has a magnetic field...
A TM wave propagating in a dielectric filled waveguide of unknown permittivity has a magnetic field with y-component given by: By = 6cos(25πx)sin(100πy)sin(1.5πx1010t - 109πz) If the guide dimensions are a=2b=4cm determine: (a) the mode numbers, (b) the relative permittivity of the material in the guide, (c) the phase velocity (d) an expression for Ex
P10.4 A rectangular waveguide with a=2b=4.8cm is filled with Teflon (er=2.11, loss tangent 3x10-4). Assume that...
P10.4 A rectangular waveguide with a=2b=4.8cm is filled with Teflon (er=2.11, loss tangent 3x10-4). Assume that the walls of the waveguide are coated with gold (s=4.1x107S/m) and that a TE10 wave at 4GHZ propagates down the guide. Find the total attenuation.
Waveguides Consider a rectangular waveguide, with transverse dimensions a = 10.668 mm and b = 4.318...
Waveguides Consider a rectangular waveguide, with transverse dimensions a = 10.668 mm and b = 4.318 mm. The waveguide is uniformly filled with a non-magnetic dielectric with????=2. We wish to use this waveguide to propagate a wave at frequency ??=13 GHz. (i)Which propagation modes can be sustained by this waveguide at 13 GHz? Explain in detail how you arrive at the answer. (ii)Calculate the propagation constant ? for the allowed modes at f = 13 GHz.(iii)Assume that the 13 GHz...