Question

a
2kg wood block is launched up a wooden ramp that is incluned at a
34 angle the blocks initial speed is 15 m/s the coeffiecient of
kinetic friction of wood in wood is .2

what vertical height does the block reacg above starting
point? what speed does it have when it slides down to its starting
point

Answer #1

A 2.0 kg wood block is launched up a wooden ramp that is
inclined at a 33 degree angle. The block's initial speed is 14 m/s
. The coefficient of kinetic friction of wood on wood is
μk=0.200
What vertical height does the block reach above its starting
point?
Express your answer to two significant figures and include the
appropriate units.
What speed does it have when it slides back down to its starting
point?
Express your answer to two...

A 2.0 kg wood block is launched up a wooden ramp that is
inclined at a 35 ∘ angle. The block’s initial speed is 10 m/s . The
coefficient of kinetic friction between the block and the ramp is
μk = 0.20.
What vertical height does the block reach above its starting
point?
Part A
What vertical height does the block reach above its starting
point?
Express your answer using two significant figures.
y =
99
m
SubmitPrevious AnswersRequest
Answer...

A block of mass m1 begins at the bottom of a ramp that is
inclined an angle θ above the horizontal. It is initially moving up
the ramp with velocity v0. A second block of mass m2 is at rest on
the ramp a distance d up the ramp from the ﬁrst block. Friction
keeps the second block from sliding down. The coeﬃcient of kinetic
friction between the ramp and the blocks is µk for both
blocks.
What is the...

To test a slide at an amusement park, a block of wood with mass
3.00 kg is released at the top of the slide and slides down to the
horizontal section at the end, a vertical distance of 23.0 mm below
the starting point. The block flies off the ramp in a horizontal
direction and then lands on the ground after traveling through the
air 30.0 mm horizontally and 40.0 mm downward. Neglect air
resistance.
How much work does friction...

A 3 kg wooden block is held motionless atop a 42 m long ramp
angled at 240.
The coefficient of kinetic friction between the block and ramp
is 0.154.
The block is released and slides down the ramp.
In your uploaded solution be sure to Draw and Label the
free-body diagram for when the block is in motion.
What distance does the block travel down the ramp in 1.30
seconds?
your answer should have 1 digit after the decimal

An 8.70-kg block slides with an initial speed of 1.80 m/s down a
ramp inclined at an angle of 25.3 ∘ with the horizontal. The
coefficient of kinetic friction between the block and the ramp is
0.87. Use energy conservation to find the distance the block slides
before coming to rest.

1. A block of mass is pulled up an incline. F= 34 N, mass= 6kg
and angle= 24 ˚. What is the acceleration of the block if the
coefficient of kinetic friction between the block and incline is
0.12.
2. A 4.0Kg block slides down a 37° incline at a constant speed.
16N force is applied up and parallel to the incline. What is the
coefficient of kinetic friction between the block and the surface
of the incline?

A 1.55-kg block is launched by a spring and slides along a ramp
as shown. The spring has a spring constant of 1180 N/m and is
compressed a distance, x, before being released. The block slides
up a frictionless ramp of height, H=0.550 m, above where the block
leaves the spring. At the top of the ramp it flies horizontally off
the ramp. Just before leaving the ramp, the kinetic energy of the
block is 8.54 J. After leaving the...

A
10 kg block is launched up a plane inclined at a 15° angle. The
initial speed of the block is 5 m/s.
a) Using Newton's laws of motion and the equations of
kinematics, calculate how far up the inclined plane does the block
slide in the absence of friction?
b) Using work and energy, answer the question in part (a) in
the presence of friction, taking the coefficient of kinetic
friction between the block and the surface to be...

There is a variable amount of friction between a block of mass m
and a ramp at an angle θ above the horizontal. The kinetic and
static coefficients of friction are equal but vary as µ=Ax, where x
is measured along the ramp and x = 0 is the bottom of the ramp. The
block is sent up the ramp with an initial speed v0, and comes to a
stop somewhere on the ramp. In the following parts, take your...

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 1 minute ago

asked 10 minutes ago

asked 11 minutes ago

asked 15 minutes ago

asked 18 minutes ago

asked 24 minutes ago

asked 28 minutes ago

asked 45 minutes ago

asked 1 hour ago

asked 1 hour ago

asked 2 hours ago

asked 2 hours ago