Question

A rectangular (20.0 cm x 55.0 cm) current loop carrying a current of 20.0 A was located with its plane parallel to a uniform 1.5 T magnetic field. (a) Label the corners of the rectangle (a, b c, and d) and calculate the magnitude of the magnetic force on each side of the rectangular current loop (b) Show the magnetic force direction on each side of the rectangle using appropriate symbols. (c) What is the total force on the loop? Justify your answer. (d) If you think that the rectangle will turn in the B-field, about what axis will it turn? Clearly indicate how it will turn. (e) Calculate the torque on the loop. |

Answer #1

Most important thing is that i considered magnetic field parallel to ad and bc side.

But the important thing is that only two sides will cause to rotation of coil in parallel magnetic field

A single-turn current loop, carrying a current of 3.69 A, is in
the shape of a right triangle with sides 45.0, 110, and 119 cm. The
loop is in a uniform magnetic field of magnitude 65.4 mT whose
direction is parallel to the current in the 119 cm side of the
loop. What is the magnitude of the magnetic force on (a) the 119 cm
side, (b) the 45.0 cm side, and (c) the 110 cm side? (d) What is...

The plane of a rectangular loop of wire 5 cm x 8 cm is parallel
to a magnetic field whose flux density is 0.15 w/m^2. (a) If the
loop carries a current of 10 amp, what torque acts on it? (b) What
is the maximum torque that can be obtained with the same total
length of wire carrying the same current in this magnetic
field?

A single-turn current loop, carrying a current of 4.75 A, is in
the shape of a right triangle with sides 50.0, 120, and 130 cm. The
loop is in a uniform magnetic field of magnitude 71.5 mT whose
direction is parallel to the current in the 130 cm side of the
loop. What are the magnitude of the magnetic forces on each of the
three sides?
(a) the 130 cm side
(b) the 50.0 cm side
(c) the 120 cm...

A current-carrying loop, made of 100 turns of a thin conducting
wire, has 4 cm and 10 cm. the current in the loop is 7 a. the plane
of the loop is parallel to a constant magnetic field of magnitude
0.2 T. is there any force acting on the loop? if so what are the
magnetic field and direction. is there a torque on the loop? if so,
what are its magnitudes and the direction? what is the maximum
possible...

Given a 0.5 x 0.3 m rectangular current loop carrying 5 A of
current, A) what is the magnitude of the magnetic dipole moment of
the loop? B) If the loop is lying flat on this page with the
current running clockwise around the loop, what is the direction of
the magnetic diploe moment vector?
11. In the previous problem, if the magnetic field, B = 0.5 T is
oriented in the +y-direction (toward the top of this page), then...

The magnetic torque exerted on a flat current carrying loop of
wire by a uniform magnetic field is: Select one: a. maximum when
the plane of the loop is perpendicular to the magnetic field b.
minimum when the plane of the loop is perpendicular to the magnetic
field c. independent of the orientation of the loop d. maximum when
the plane of the loop at an 45 to the magnetic field e. minimum
when the plane of the loop is...

A
square loop of side 4 cm, carrying a current of 5.2 A, is placed
inside of a uniform magnetic field of magnitude 1.55 T pointing in
the z direcrion. If the square loop makes an angle of 30 degrees
with the magnetic field, what is the magnetic moment of the
loop?
What is the magnitude of the torque on the loop?

A 4 x 10 cm rectangular loop of wire is situated on the x-y
plane with its corners located at coordinates (0, 0), (10,0), (10,
4) and (4,0) respectively. The loop has a current of 30 A flowing
in the counter-clockwise direction. Determine the magnetic field at
the centre of the loop.

A square current loop 4.6 cm on each side carries a 510 mA
current. The loop is in a 1.5 T uniform magnetic field. The axis of
the loop, perpendicular to the plane of the loop, is 30∘ away from
the field direction.
a) What is the magnitude of the torque on the current loop?

A square loop and a rectangular loop are each made from the same
length of wire. Each loop contains a single turn, and carries the
same amount of current. The loops are placed in the same uniform
magnetic field. The long sides of the rectangle are four times as
long as its short sides. Determine the ratio of the maximum torque
on the square loop to the maximum torque on the rectangular loop.
(Enter your answer as a fraction, e.g.,...

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 10 minutes ago

asked 21 minutes ago

asked 27 minutes ago

asked 46 minutes ago

asked 54 minutes ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 2 hours ago

asked 2 hours ago

asked 3 hours ago