Question

A galvanometer with r = 100 Ω and 2mA of full-scale current is turned into an...

A galvanometer with r = 100 Ω and 2mA of full-scale current is turned into an ammeter by association with a shunt resistor Rsh = 0.5 Ω. What is the maximum current that it can measure?

Homework Answers

Answer #1

The answer is in the images. Page number is mentioned at right top.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A galvanometer has a full scale current of 200 mA and an internal resistance of 500...
A galvanometer has a full scale current of 200 mA and an internal resistance of 500 mΩ. a) Find the resistance needed to make the galvanometer into an ammeter with a full scale current of 5 A. b) Find the resistance needed to make the galvanometer into a voltmeter with a full scale voltage of 10 V.
a moving coil galvanometer produces full scale deflection for a current of 45mA. The resistance of...
a moving coil galvanometer produces full scale deflection for a current of 45mA. The resistance of the galvanometer is 22 ohms. How will you convert the galvanometer into an ammeter of range 22A PHYSICS .
1. A) A 13-Ω coffee maker and a 16-Ω frying pan are connected in series across...
1. A) A 13-Ω coffee maker and a 16-Ω frying pan are connected in series across a 120-V source of voltage. A 25 Ω bread maker is also connected across the 120-V source and is in parallel with the series combination. Find the total current supplied by the source of voltage. B) A new "D" battery has an emf of 1.5 V. When a wire of negligible resistance is connected between the terminals of the battery, a current of 25...
the resister of the coil of a pivoted coil galvanometer is 8.88 ohms and current of...
the resister of the coil of a pivoted coil galvanometer is 8.88 ohms and current of 2.50*10^-2 A causes it to deflect full scale we want o convert this galvanometer to an ammeter reading 18 A full scale the only shunt available has resistance of 3*10^-2 ohms for good solution will get positive vote
please show your work. 1.) An electric blanket is connected to a 240-V outlet and consumes...
please show your work. 1.) An electric blanket is connected to a 240-V outlet and consumes 111 W of power. What is the resistance of the heater wire in the blanket? _______? 2.)A galvanometer with a coil resistance of 9.07 ? is used with a shunt resistor to make a nondigital ammeter that has an equivalent resistance of 0.41 ?. The current in the shunt resistor is 2.75 mA when the galvanometer reads full scale. Find the full-scale current of...
1- A moving coil instrument has a resistance of 2 ohms(Rm) and its reads upto 250Volts(full...
1- A moving coil instrument has a resistance of 2 ohms(Rm) and its reads upto 250Volts(full scale reading )when a resistance of 5000 ohms is connected in series with it. Find the current range of the instrument ( Im + Is) when it is used as an ammeter with the coil connected across a shunt resistance of 2 milli ohms(Rs). 2- - In the bridge shown below, the null detector is a 1 mA, 50 , 100 divisions galvanometer. The...
What resistance is to be used to convert a galvanometer that gives full scale deflection of...
What resistance is to be used to convert a galvanometer that gives full scale deflection of 1 mA to read up to 10 Amperes? Please show a picture, and show work!!! I need to understand this!!!
A 6.00 Ω resistor is mounted in parallel with a resistor R=14.0 Ω, and this combination...
A 6.00 Ω resistor is mounted in parallel with a resistor R=14.0 Ω, and this combination is connected in series with an 4.50 Ω resistor and a 20.0 Volts battery. What is the current through the R resistor?
A 50 Ω resistor, 100 mH inductor and 60 μ F capacitor are connected in series...
A 50 Ω resistor, 100 mH inductor and 60 μ F capacitor are connected in series to an AC generator. The generator produces 60 V r m s at 30 Hz. What is the maximum current in the circuit at 30 Hz?
Power can be determine by using three possible ways and there are P = I x...
Power can be determine by using three possible ways and there are P = I x V, P = V2 / R and P = I2 X R. This experiment will use 2 k resistor which having resistance accuracy limitation of ±0.25%. The measurement was taken by using voltmeter with the accuracy limitation within ±0.55% of the maximum range, 10 V to measure the voltage across the resistor and an ammeter having accuracy limitation within ±0.40% of maximum range, l0mA...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT