Question

Two objects are said to be in parallel when they both act on the system in...

Two objects are said to be in parallel when they both act on the system in the same way, e.g., two forces are in parallel if they have the same direction and are applied at the same point.

A light rod of length 46.1 cm is held aloft from the ceiling by two springs attached to its ends. The left spring has a stiffness of 26.8 kg/s2 and equilibrium length of 25.9 cm and the right spring has a stiffness of 11 kg/s2 and equilibrium length of 25.3 cm. A ring weighing 763 g is placed 19.5 cm from the left spring.

(a) How much does the left spring stretch?


(b) How much does the right spring stretch?


Now, mathematically slide the ring to the point that levels the rod.

(c) At what distance from the left spring should you place the ring in order for the rod to be level?


(d) How far from the ceiling is the rod when it's level?


Now consider modelling the two springs as if there were only one spring that held the ring aloft.

(e) What is the equilibrium length of the spring?


(f) How much does the spring stretch when the ring is placed on it?


(g) What is the stiffness of the spring?

Homework Answers

Answer #1

Dear student,

Find this solution, and RATE IT ,If you find it is helpful .your rating is very important to me.If any incorrectness ,kindly let me know I will rectify them soon.

Thanks for asking ..

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Two objects are said to be in parallel when they both act on the system in...
Two objects are said to be in parallel when they both act on the system in the same way, e.g., two forces are in parallel if they have the same direction and are applied at the same point. A light rod of length 33.7 cm is held aloft from the ceiling by two springs attached to its ends. The left spring has a stiffness of 15.3 kg/s2 and equilibrium length of 29.5 cm and the right spring has a stiffness...
SPRINGS IN PARALLEL Two objects are said to be in parallel when they both act on...
SPRINGS IN PARALLEL Two objects are said to be in parallel when they both act on the system in the same way, e.g., two forces are in parallel if they have the same direction and are applied at the same point. A light rod of length 47.1 cm is held aloft from the ceiling by two springs attached to its ends. The left spring has a stiffness of 13.8 kg/s2 and equilibrium length of 30.5 cm and the right spring...
A 0.583 kg mass hung from a spring stretches the spring by an amount 0.310 m....
A 0.583 kg mass hung from a spring stretches the spring by an amount 0.310 m. (a) How much does it stretch each of two such identical springs if they are hung in parallel as shown in Figure (a)? (b) How much does it stretch the combination of two such springs if they are hung in series as shown in Figure (b)? (c) Calculate the effective force constant of a single replacement spring in each case. Figure (a)     Figure (b)    
A bar weighting 26.0 N is supported horizontally on each end by two hanging springs, each...
A bar weighting 26.0 N is supported horizontally on each end by two hanging springs, each 15.0 cm long, with spring constants 0.970 N/cm and 1.45 N/cm, respectively. The bar is 6.00 m long and has a center mass of 2.00 m from the spring constant 0.970 N/cm. How far does each spring stretch?
A massless pan hangs from a spring that is suspended from the ceiling. When empty, the...
A massless pan hangs from a spring that is suspended from the ceiling. When empty, the pan is 50 cm below the ceiling. If a 100 g clay ball is placed gently on the pan, the pan hangs 60 cmbelow the ceiling. Suppose the clay ball is dropped from the ceiling onto an empty pan. Part A What is the pan's distance from the ceiling when the spring reaches its maximum length? Express your answer to two significant figures and...
Description: A single mass m1 = 3.9 kg hangs from a spring in a motionless elevator....
Description: A single mass m1 = 3.9 kg hangs from a spring in a motionless elevator. The spring is extended x = 11 cm from its unstretched length. the spring constant of the spring is 347.45 N/m Now, three masses m1 = 3.9 kg, m2 = 11.7 kg and m3 = 7.8 kg hang from three identical springs in a motionless elevator. The springs all have the same spring constant that you just calculated above. the force the top spring...
A 200.g block on a horizontal, frictionless surface is located between two unstrained springs. The spring...
A 200.g block on a horizontal, frictionless surface is located between two unstrained springs. The spring on the left of the block has a spring constant of 35N/m and the spring on the right has a constant of 85N/m. a) How much work must be done by an external force to displace the block 3.0cm to the left? b) If the block is released from the above position, how fast will the block be moving when it returns to the...
Jae has two infinitely long wires with same currents running through in parallel and they are...
Jae has two infinitely long wires with same currents running through in parallel and they are placed on a floor. Describe what happens to the position of the wires. So, for instance, when the two wires were 10 cm away from each other, what happens to the distance after 1 minute? Then, with that in mind, briefly describe what happens to a spring when current runs through using Ampere’s law. Please explain thoroughly and write neatly!
*** Please answer ALL three questions including question 1, question 2 that also comes with part...
*** Please answer ALL three questions including question 1, question 2 that also comes with part A and B, and finally question 3. *** 1) A car rides on four wheels that are connected to the body of the car by spring assemblies that let the wheels move up and down over bumps and dips in the road. When an 80 kg person sits on the left front fender of a small car, this corner of the car dips by...
05.3 Consider a spring that does not obey Hooke's law very faithfully. One end of the...
05.3 Consider a spring that does not obey Hooke's law very faithfully. One end of the spring is fixed. To keep the spring stretched or compressed an amount x, a force along the x-axis with xcomponent Fx =kx – bx2 + cx3 must be applied to the free end, where k = 130 N/m, b = 660 N/m2 , and c = 16000 N/m3 . Note that x > 0 when the spring is stretched and x < 0 when...