Question
A cube of cork with side lengths 0.06 m and density of 288 kg/m^3 is suspended...
A cube of cork with side lengths 0.06 m and density of 288 kg/m^3 is suspended under water w/ the top of the cube at a depth of 1 m below the surface.
a. What is the acceleration when the cork is released?
b. If this piece of cork is instead floating on the surface, how much of the cork is below the surface?
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
A wood cube 0.26 m on each side has a density of 730 kg/m3 and floats...
A wood cube 0.26 m on each side has a density of 730 kg/m3 and
floats levelly in water.
What is the distance from the top of the wood to the water
surface? 7.0 x 10^-2m
What mass has to be placed on top of the wood so that its top is
just at the water level?
A uniform, wooden cube with length d = 3.0 cm on each side has a density...
A uniform, wooden cube with length d = 3.0 cm on each
side has a density r = 500 kg/m3 and floats
motionlessly in water (density 1000 kg/m3). (Take the
acceleration due to gravity to be 9.8 m/s2.) When
pressed down by a small amount, and released, what is the
approximate frequency of the resulting up-and-down
oscillations?
A cube of wood with dimension 20 cm and density 650 kg/m3 floats in water. a.)What...
A cube of wood with dimension 20 cm and density 650
kg/m3 floats in water.
a.)What is the distance from the top surface of the cube to the
surface of the water?
b.)How much mass of lead is required to be put on cube so that
the top of the cube is level with the surface of the water?
A cube with edge length L = 0.24 m and density ρc = 0.93×103 kg/m3 floats...
A cube with edge length L = 0.24 m and density
ρc = 0.93×103 kg/m3
floats in equilibrium in a liquid of density ρl
= 1.5×103 kg/m3, with the top of the cube a
distance d above the liquid’s surface, as shown in the
figure.
(a) If the density of the cube is equal to the
density of the liquid, how high, in meters, will the top of the
cube be above the surface of the liquid?
(b) The given values...
A wood cube 0.28m on each side has a density of 680kg/m3 and floats levelly in...
A wood cube 0.28m on each side has a density of 680kg/m3 and
floats levelly in water.
What is the distance from the top of the wood to the water
surface? (in m)
Express your answer using two significant figures
What mass has to be placed on top of the wood so that its top is
just at the water level? (kg)
Express your answer using two significant figures.
The density of freshwater ice is 917 kg/m^3. Density of salt water is 1030 kg/m^3. If...
The density of freshwater ice is 917 kg/m^3.
Density of salt water is 1030 kg/m^3. If an ice berg has a
volume of 1000m^3, how much is below the surface?
piece of cork is held partially submerged in water by a string attached to its bottom....
piece of cork is held partially submerged in water by a string
attached to its bottom. The weight of the
cork in air is 20.0 N. The tension in the string is 10.0 N.
(a) What is the buoyant force on the cork? (Newston's 1st
law)
(b) What is the volume of the cork under water? (Archimedes
Principle)
(c) If this volume is 20.0% of the total volume of the cork,
what is the density of the cork?
Oil of...
What is the density (in kg/m3) of a woman who floats in freshwater with 4.32% of...
What is the density (in kg/m3) of a woman who floats in
freshwater with 4.32% of her volume above the surface? (This could
be measured by placing her in a tank with marks on the side to
measure how much water she displaces when floating and when held
under water.) (Give your answer to at least three significant
figures.) What percent of her volume is above the surface when she
floats in seawater?
A square gate is used to prevent seawater (density = 1027 kg/m^3) intrusion into a sewer...
A square gate is used to prevent seawater (density = 1027
kg/m^3) intrusion into a sewer main. The depth of
water(density=1000 kg/m^3) in the sewer is 1.3 m, and the top and
bottom of the gate 0.3m and 0.6m below the surface in the sewer .
If the tide rises and falls such that the minimum and maximum
heights of seawater are 2.6m and 3m . Calculate the force required
at the base of gate to ensure there is no...
A circular swimming pool has a diameter of 18 m, the sides are 3 m high,...
A circular swimming pool has a diameter of 18 m, the sides are 3
m high, and the depth of the water is 3 m. How much work (in
Joules) is required to pump all of the water over the side? (The
acceleration due to gravity is 9.8 m/s^2 and the density of water
is 1000 kg/m^3.)
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 6 minutes ago
asked 8 minutes ago
asked 11 minutes ago
asked 32 minutes ago
asked 36 minutes ago
asked 43 minutes ago
asked 57 minutes ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago