Question

Calculate the mass flow rate of dry saturated thermal fluid condensing at 3 bar absolute required...

Calculate the mass flow rate of dry saturated thermal fluid condensing at 3 bar absolute required to heat 0.55 kg/s of a liquid, having a mean specific heat capacity of 2.34J/kg/K from 200 to 300 degree celcius A) 0.47 kg/s B) 0.45 kg/s C) 0.75 kg/s D) 0.5 kg/s

dry saturated thermal fluid-steam

Homework Answers

Answer #1

solution :

heat required to incresed the temp. of liquid from 200 to 300 k

THIS HEAT IS SUPPLIED BY STEAM.

AT 3 BAR ABSOLUTE PRESSURE, SPECIFIC ENTHALPY OF STEAM IS 2724.66 KJ/KG.

SO SUPPLIED HEAT;

OPTION MIGHT BE HAVING SOME UNIT PROBLE. CHECK IT OUT

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Methane enters a heat e xchanger at a volumetric flow rate of 145.0 m 3 /min,...
Methane enters a heat e xchanger at a volumetric flow rate of 145.0 m 3 /min, at an absolute pressure of 1.013 bar and temperature of 15.0°C. At these conditions, the specific enthalpy of methane is - 23.181 kJ/kg. The methane leaves the heat exchanger at an absolute pressure of 1.0 13 bar and temperature of 60.0°C. The corresponding specific enthalpy at these conditions is 78.656 kJ/kg. The methane is heated by a stream of saturated steam entering the heat...
Saturated water vapor leaves a steam turbine at a flow rate of 1.47 kg/s and a...
Saturated water vapor leaves a steam turbine at a flow rate of 1.47 kg/s and a pressure of 0.51 bar. The vapor is to be completely condensed to saturated liquid in a shell-and-tube heat exchanger that uses city water as the cold fluid. The water enters the thin-walled tubes at 17oC and is to leave at 57.6 oC. Assuming an overall heat transfer coefficient of 2000 W/m2K, determine the required heat exchanger surface area and the water flow rate. cp,c...
(a) Fluid at a mass flow rate of 0.352 kg/s flows through a tube with a...
(a) Fluid at a mass flow rate of 0.352 kg/s flows through a tube with a diameter of 15 mm and a length of 25 m. The inner surface of the tube is heated with a uniform heat flux of 1000 W/m2. Measurements shown that the inlet temperature of the fluid is 30 ˚C. Assume the outer surface of the tube is perfectly insulated. Consider the thermophysical properties of the fluid are as follows: density ρ = 1000 kg/m3, specific...
A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated...
A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at 8 bar. The isentropic compressor efficiency is 80%. The mass flow rate of refrigerant is 7 kg/min. Determine: (a) the compressor power, in kW, (b) the refrigeration capacity, in tons, (1 ton = 3.5168 kW) and, (c) the coefficient of performance, (d) rate of entropy production in kW/K, for the...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT