Question

Steam at 4.5 MPa and 500 C enters the turbine with a velocity of 60 m/s...

Steam at 4.5 MPa and 500 C enters the turbine with a velocity of 60 m/s and its mass flow rate is 5,000 kg/h. The steam leaves the turbine at a point 3m below the turbine inlet with a velocity of 350 m/s. The heat loss from the turbine is 100,000 kJ/hr and the shaft work produced is 950hp. A small portion of the exhaust steam from the turbine is passed through a throttling valve and discharges at atmospheric pressure. What is the temperature of the steam leaving the valve?

Engineering   Chemical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Steam enters a diffuser at 250°C and 300kPa with an inlet velocity of 402 m/s. Steam...
Steam enters a diffuser at 250°C and 300kPa with an inlet velocity of 402 m/s. Steam leaves the diffuser at 350°C and 600kPa. The heat gain in the diffuser is 80 kW. The inlet area of the diffuser is 820 cm2. Determine the velocity and the volume flow rate of the steam at the diffuser exit.
Steam enters an adiabatic turbine at 7 MPa, 700 °C and 80 m/s and leaves at...
Steam enters an adiabatic turbine at 7 MPa, 700 °C and 80 m/s and leaves at 50 kPa, 150 °C, and 140 m/s. If the power output of the turbine is 6 MW, determine: i)          Mass flowrate of the steam flowing through the turbine.                                      ii)        The isentropic efficiency of the turbine.
A steam turbine has an inlet of 3 kg/s water at 1.2 MPa, 500°C with velocity...
A steam turbine has an inlet of 3 kg/s water at 1.2 MPa, 500°C with velocity of 16 m/s. The exit is at 150 kPa, 250°C and very low velocity. Find the power produced and the rate of entropy generation.
Steam enters an adiabatic turbine at 5 MPa and 700°C at a rate of 18.6 kg/s....
Steam enters an adiabatic turbine at 5 MPa and 700°C at a rate of 18.6 kg/s. The steam leaves the turbine at 50 kPa and 200°C. What is the rate of work produced by the turbine in MW? What is the rate of change of entropy of the steam during this process in kW/K? If the turbine is reversible and adiabatic and the steam leaves at 50 kPa, what is the rate of work produced by this turbine in MW?...
Steam flows steadily through an adiabatic turbine. The inlet conditions are: 20 MPa, 500°C, 90 m/s...
Steam flows steadily through an adiabatic turbine. The inlet conditions are: 20 MPa, 500°C, 90 m/s and the exit conditions are 20 kPa, 95% quality, and 60 m/s. The mass flow rate of the steam is 15 kg/s. Find: a) The change in kinetic energy of the steam, (5 points) b) The power output, and (5 points) c) The turbine inlet area. (5 points)
A steam turbine has inlet steam pressure p1 = 1.4 MPa absolute. Inlet steam temperature is...
A steam turbine has inlet steam pressure p1 = 1.4 MPa absolute. Inlet steam temperature is T1 = 400 oC. This corresponds to inlet enthalpy per unit mass of h1 = 3121 kJ/kg. Exit pressure of the steam is p2 = 101 kPa absolute. Exit steam temperature is T2 = 100 oC. This corresponds to exit enthalpy per unit mass of h2 = 2676 kJ/kg. Inlet speed of the steam is V1 = 15 m/s and exit speed is V2...
300 kg/hr of superheated steam is used to drive a turbine at a velocity of 50...
300 kg/hr of superheated steam is used to drive a turbine at a velocity of 50 m/s. the superheated steam enters the turbine at 60 bar and 400°C . The stream leaves the turbine as a saturated steam with a velocity of 100 m/s at 1.5 bar. The turbine delivers work and the heat loss from the turbine is 10 KW. a) Calculate the net kinetic energy of the system (delta kE) and determine the work done by the turbine...
Consider an adiabatic turbine. At steady mass flow rate of 10 kg/s, steam enter the turbine...
Consider an adiabatic turbine. At steady mass flow rate of 10 kg/s, steam enter the turbine at 4.5 MPa, 600°c and 85 m/s and leaves the turbine at 40 kPa, quality of 0.8 and 50 m/s. Determine : a) the power output b) the turbine inlet area
Steam enters an adiabatic turbine at 5 Mpa 500 oC with a mass flow rate of...
Steam enters an adiabatic turbine at 5 Mpa 500 oC with a mass flow rate of 2 kg/s and leaves at 100 kpa. The isentropic efficiency of the turbine is 90%. Find (12 points) (a) Actual work output of the turbine _______________ (7 points) b) Maximum work output of the turbine_______________(3 points) (c) Entropy change during this process __________________________(2 points)
13)  A turbine, operating under steady-flow conditions, receives 5000 kg of steam per hour. The steam enters...
13)  A turbine, operating under steady-flow conditions, receives 5000 kg of steam per hour. The steam enters the turbine at a velocity of 3000 m/min, an elevation of 5 m and a specific enthalpy of 2787 kJ/kg. It leaves the turbine at a velocity of 6000 m/min, an elevation of 1 m and a specific enthalpy of 2259 kJ/kg. Heat losses from the turbine to the surroundings amount to 16736 kJ/h. Determine the power output of the turbine. 14) 12 kg...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT