Question

Construct a size efficiency relationship for the plate type collector if the voltage is 50 KV,...

Construct a size efficiency relationship for the plate type collector if the voltage is 50 KV, the distance between plates is 4 cm, the plates are 3m x 3m, there are 10 plates and the flow is 0.5 m^3/s. Assume that p=2.1 (dielectric constant) at 420 oK.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
You are asked to construct a capacitor having a capacitance near 1  nF and a breakdown voltage...
You are asked to construct a capacitor having a capacitance near 1  nF and a breakdown voltage in excess of 10000  V . You think of using the sides of a tall Pyrex drinking glass as a dielectric, lining the inside and outside curved surfaces with aluminum foil to act as the plates. The glass is 15  cm tall with an inner radius of 3.6  cm and an outer radius of 3.8  cm . Use 4.7 for the dielectric constant of Pyrex, and use 13.0  MV/m...
The following source is used to inspect 50 mm thick Al plate: 100 kV; max. tube...
The following source is used to inspect 50 mm thick Al plate: 100 kV; max. tube current 6 mA; the square spot size 2.2 x 2.2 mm2. The distance from the source to the front of the plate is 500mm. Image magnification M=3. 3 mm diameter flaw is located on the middle of the plate, on the centerline from the source. Sketch this inspection arrangement, indicating the image size on the film and the umbra and penumbra. Calculate the geometric...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10 cm thick. Since the shaft exterior radiation beam coefficient is 0.8 and the flue gas temperature is 350°C, the external ambient temperature is 25°C and the outer ambient heat transport coefficient is 20 W/m2K; a) Calculate the shaft exterior temperature. b) In order to reduce the risk of burn injury that may occur in the body, the shaft is asked to be below 55°Cve...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT