Question

Consider a horizontal pipe in which a viscous fluid is moving at a laminar flow. The...

Consider a horizontal pipe in which a viscous fluid is moving at a laminar flow. The pressure drop across a 0.2-cm ID pipe was measured at 18,000 Pa/m. The fluid has a rho= 1110 kg/m3 and mu= 0.03 kg/m-s. Determine the equation that defines the velocity profile vz(r).Then, calculate the velocity at the center of the pipe (vzat r = 0 in m/s).

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A pipe has a cross sectional area of 10 cm2 with an unknown fluid, density of...
A pipe has a cross sectional area of 10 cm2 with an unknown fluid, density of 1150 kg/m3 moving at a speed of 3 m/s and has a pressure of 1.4 atm. The pipe then lowers down 2.5 meters and narrows to a cross sectional area of 2.5 cm2. What is the speed of the fluid? 1 atm = 1.01 x 105 Pa. express your answer with the correct units Determine the pressure in atm of the fluid in the...
A water pipe tapers down from an initial radius of R1 = 0.2 m to a...
A water pipe tapers down from an initial radius of R1 = 0.2 m to a final radius of R2 = 0.09 m. The water flows at a velocity v1 = 0.86 m/s in the larger section of pipe. 1. Using this water supply, how long would it take to fill up a swimming pool with a volume of V = 130 m3? (give your answer in minutes) 2. The water pressure in the center of the larger section of...
1- Water flows in a 10 m long and 4 cm diameter pipe contains 4 elbows...
1- Water flows in a 10 m long and 4 cm diameter pipe contains 4 elbows ( KL= 0.2 ) at velocity 8 m/s. Calculate the total head losses when the friction factor f=0.03 35.56 m 22.07 m 27.07 m 15.46 m 2- water flows in a 10 m long and 5 cm diameter horizontal pipe at rate 15 l/s Calculate the pressure drop Take the density of water 1000 kg/m3 and the dynamic viscosity 0.001 kg/m.s 74.13 kPa 96.41...
1. A hydraulic lift uses a compressor to compress the hydraulic fluid with a moving piston...
1. A hydraulic lift uses a compressor to compress the hydraulic fluid with a moving piston (piston A) of radius RA = 4.83 cm. A second piston (piston B) of radius RB = 18.48 cm is used at the lift to lift cars. What force must be applied by piston A to lift a 14,871N car with piston B? 2. When a 0.438 kg mass is hung from a certain spring it stretches 0.119 m to its equilibrium position at...
A concentric tube heat exchanger is comprised of a stainless steel (ks = 40 W/mK) inner...
A concentric tube heat exchanger is comprised of a stainless steel (ks = 40 W/mK) inner pipe, NPS 2- nominal schedule 40 size (corresponding to an inner diameter of 52.5 mm and an outer diameter of 60.3 mm), and an outer stainless steel pipe of NPS 3-nominal schedule 40 (ID = 77.9 mm, OD = 88.9 mm). The heat exchanger has an effective length of 35 m. The inner pipe fluid is ammonia (va = 0.3 · 10-6m2/s, cpa =...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT