Question

he elementary liquid-phase reaction: A + B -----> C is to be carried out non-isothermally in...

he elementary liquid-phase reaction:

A + B -----> C

is to be carried out non-isothermally in a flow system with reaction constant,k= 0.07 dm^3mol-1min-1at 300K. The concentrations of each feed stream of A and B is 2 mol dm-3. The volumetric flow rate of each feed stream is 5 dm^3min-1. The two steams are mixed immediately prior to entering the reactor system. This flow system is conducted at 300K with two reactors: a 200 dm^3 stainless steel CSTR and an 800 dm^3 steel PFR.

(a)Determine the conversion that would be operated if both the CSTR and PFR were operated in series with the CSTR preceding the PFR.

(b)Determine the conversion that would be obtained if both CSTR and PFR were operated in parallel with 5 mol min-1fed to each reactor.

Engineering   Chemical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The elementary gas phase reaction A + B C is to be carried out isothermally in...
The elementary gas phase reaction A + B C is to be carried out isothermally in a continuous reactor. Reactants are entering with a stoichiometric proportions at 10 atm and 130°C molar flow rate of 20 mol/min. The exit conversion is 90%. The following data was collected from experimental work T, K kA (min-1) 360 5.38 368 8.35 376 12.73 385 16.34 395 21.23 410 28.61 425 33.81 Estimate the rate constant and the activation energy Calculate the required volume...
The elementary irreversible organic liquid-phase reaction, A + B → C, is carried out in a...
The elementary irreversible organic liquid-phase reaction, A + B → C, is carried out in a flow reactor. An equal molar feed in A and B enters at 27 oC, and the volumetric flow rate is 2 L/s. The feed concentration is CA0 = 0.1 mol/L. a) Calculate the PFR and CSTR volumes necessary to achieve 85% conversion when the reaction is carried out adiabatically. b) What is the maximum inlet temperature one could have so that the boiling point...
The elementary liquid phase reaction takes place in an adiabatic flow reactor. ? + ? →...
The elementary liquid phase reaction takes place in an adiabatic flow reactor. ? + ? → ? An equimolar feed in A and B enters at 300K, and the volumetric flow rate is 2 dm3 /s and CA0= 100 mol/m3 . a) Calculate the PFR and CSTR volumes to achieve 75 % conversion. b) If the outlet temperature of the reactor is 550 K, for complete conversion, calculate the inlet temperature of CSTR. HA°(273 K) = - 20 kcal/mol, HB°...
1. A ⇄ B + C The above gas phase elementary reversible reaction is carried out...
1. A ⇄ B + C The above gas phase elementary reversible reaction is carried out isothermally at CSTR at 640°C. The molar flow rate of raw material A is FA0 = 3.34 mol / min and the input concentration is CA0 = 0.04 mol / L. The reaction rate constant kA at 640 ° C is 0.1 mol / (Lꞏminꞏatm). When the equilibrium constant KP is 10 atm, find the corresponding equilibrium conversion Xe and calculate the reactor volume...
Two CSTRs with volumes V1= 100 m^3 and V2= 30 m^3 are available at a chemical...
Two CSTRs with volumes V1= 100 m^3 and V2= 30 m^3 are available at a chemical plant. A vacation student suggests that these reactors be used in series for the isothermal irreversible liquid-phase reaction A + B ? products The reaction is first order with respect to each of the reactants A and B with rate constant, k2= 0.011 dm^3mol-1min-1. The feed is equimolar in A and B, CA0= CB0= 1.5 mol dm-3 and the volumetric flow rate, v0= 20...
The isothermal and isobaric gas phase reaction A → B + C follows an elementary rate...
The isothermal and isobaric gas phase reaction A → B + C follows an elementary rate law and is to be carried out in a CSTR. The reaction constant k = 1.20 s-1 when the reaction temperature T = 300 K. (a) When pure A is fed to a CSTR at 300K and a volumetric flow rate of 5 dm3 /s,a conversion of X = 0.6 is achieved. Please determine the volume of the CSTR. (b) If the CSTR’s volume...
Part I The elementary gas phase reaction (CH3)3COOC(CH3)3 --> C2H6 + 2CH3COCH3 is carried out isothermally...
Part I The elementary gas phase reaction (CH3)3COOC(CH3)3 --> C2H6 + 2CH3COCH3 is carried out isothermally in a flow reactor. The reaction rate constant at 500C is 1x10-4 min-1 and the activation energy is 85 kJ/mol. Pure di-tert-butyl peroxide enters the reactor at 10 atm and 127oC and a molar flowrate of 2.5 mol/min. Calculate the reactor volume and space time to achieve 90% conversion in; a) PF reactor b) CSTR reactor c) Propose the diameter (Dt) and length (L)...
The irreversible gas-phase non-elementary reaction A + 2B ---> C takes place in an isothermal (227...
The irreversible gas-phase non-elementary reaction A + 2B ---> C takes place in an isothermal (227 C) constant-volume batch reactor. The initial feed to the reactor consists of 40 mol% A and 60 mol% B at a total pressure of 10 atm. Measurements of the rate of reaction as a function of conversion yielded the following results: -rA (mol dm^-3 s^-1) x (1x10^8) 0.010 0.005 0.002 0.001 XA   0.0 0.2 0.4 0.6 Calculate the time required to achieve a conversion...
Consider a reaction of species A to form product B in a constant-density isothermal system. The...
Consider a reaction of species A to form product B in a constant-density isothermal system. The rate of disappearance of A is given by a second-order rate, that is, (-rA) = kCA2. A process plant carries out the reaction using a single PFR with 95% conversion of A. To increase production, a second reactor is added. The second reactor is to have the same volume as the first one, and the overall conversion from the system of two reactors is...
1- The gas phase reaction 1/2N2 + 3/2H2 -->NH3 is to be carried out isothermally. The...
1- The gas phase reaction 1/2N2 + 3/2H2 -->NH3 is to be carried out isothermally. The molar feed is 50% H2, 50% N2 at a pressure of 16.4 atm and 227oC. a) Construct a complete stoichiometric table. b) Calculate the concentrations of ammonia and hydrogen when the conversion of H2 is 60%. c) Suppose by chance the reaction is elementary with ????2 = 40 ????3 ??????.?? . Write the rate of reaction solely as a function of conversion for a...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT