Question

Carbon monoxide is burned with excess air at 1 atm in an adiabatic reactor. The reactants...

Carbon monoxide is burned with excess air at 1 atm in an adiabatic reactor. The reactants are fed at 25C and the final temperature (i.e., the adiabatic flame temperature) is 1500C.

(a) Calculate the percentage excess air fed to the reactor. USE THE HEAT OF REACTION METHOD (THIS ANSWER SHOULD BE 99.1% excess O2)

(b) If the percentage excess air were increased, how would the adiabatic flame temperature change and why would it change in this manner?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Methane is burned with 25% excess air in a continuous adiabatic reactor. The methane enters the...
Methane is burned with 25% excess air in a continuous adiabatic reactor. The methane enters the reactor at 25°C and 1.10 atm at a rate of 550 L/s, and the entering air is at 150°C and 1.1 atm. Combustion in the reactor is complete, and the reactor effluent gas emerges at 1.05 atm. (a) Calculate the temperature and the degrees of superheat of the reactor effluent. (Consider water to be the only condensable species in the effluent.) (b) Suppose only...
Propane gas is burned using air, both are at 25c and 1 atm. excess air is...
Propane gas is burned using air, both are at 25c and 1 atm. excess air is used. The products of combustion are carbon dioxide(gas) and vapor water along with excess oxygen and nitrogen exit the reactor at 1520 k. Predict the percentage of excess air (in % units not fractional) used in the steady flow combustion chamber. (Correct answer is 100% - please explain and show why)
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air...
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air (ie 250% of the theoretical air) is used. The products of the combustion are carbon dioxide(gas) and vapor water along with the excess oxygen. Predict the adiabatic flame temperature, in degrees K, in the steady-flow combustion chamber. Use the thermodynamic data from your textbook, Appendix E for all the required data.
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air...
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air (ie 250% of the theoretical air) is used. The products of the combustion are carbon dioxide(gas) and vapor water along with the excess oxygen. Predict the adiabatic flame temperature, in degrees K, in the steady-flow combustion chamber. Use the thermodynamic data from your textbook, Appendix E for all the required data Textbook: Introductory Chemical Engineering Thermodynamics (Ed. 2) by Elliott, J. Richard, Lira, Carl...
Methanol vapor is burned with excess air in a catalytic combustion chamber. Liquid methanol initially at...
Methanol vapor is burned with excess air in a catalytic combustion chamber. Liquid methanol initially at 25 ◦C is vaporized at 1.1 atm and heated to 100 ◦C; the vapor is mixed with air that has been preheated to 1100 ◦C, and the combined stream is fed to the reactor at 100 ◦C and 1 atm. The reactor effluent emerges at 300 ◦Cand 1atm. Analysis of the product gas yields a dry-basis composition of 4.8% CO2, 14.3% O2, and 80.9%...
Carbon monoxide reacts with air at 1 atm and 1000 K in an exhaust gas reactor....
Carbon monoxide reacts with air at 1 atm and 1000 K in an exhaust gas reactor. The mole fractions of the exhaust gas-air mixture flowing into the reactor are CO, 3%; O2, 7%; N2, 74%; CO2, 6%; H2O, 10%. (a) Calculate the concentration of CO and O2 in gram moles per cm3 in the entering mixture. (b) The rate of reaction is given by d[CO]/dt = -4.3x1011 x [CO][O2]0.25 exp[-E/(RT)] [ ] denotes concentration in gram moles per cm3, E/R...
Hydrogen is burned with oxygen as follows: ? 2 ( ? ) + 12 ? 2...
Hydrogen is burned with oxygen as follows: ? 2 ( ? ) + 12 ? 2 ( ? ) → ? 2 ? ( ? ) Hydrogen and oxygen are fed in stoichiometric proportions to a continuous adiabatic reactor at 25oC and 1 atm. The reaction proceeds to completion. Assuming 1 mol/s of hydrogen as a basis, calculate the reactor exit stream temperature (oC) using heat of formation method.
Suppose you burned 0.414 g of solid carbon in an excess of oxygen gas in a...
Suppose you burned 0.414 g of solid carbon in an excess of oxygen gas in a constant-volume calorimeter to give carbon dioxide gas. C(s) + O2(g) → CO2(g) The temperature of the calorimeter, which contained 770. g of water, increased from 23.02°C to 26.31°C. The heat capacity of the bomb is 901. J/K. Calculate ΔU per mole of carbon.
A steam of 100mol/s ethanol(C2H5OH) vapor at 400oC and 1 atm is fed to an adiabatic...
A steam of 100mol/s ethanol(C2H5OH) vapor at 400oC and 1 atm is fed to an adiabatic reator. The ethanol is reacted to produce acetaldehyde (CH3CHO) vapor and hydrogen (H2) gas.After a conversion of 30% the products exit from the reactor at 1atm.It is given that the heat capacity of acetaldehyde,in kJ/(mol.oC) is given as below: Cp,CH3CHO=50.48X10-3+13.26x10-5T-8.049x10-8T2+23.8X10-12T3 i)Express the molar flowrate and specific enthalpy for all substances in the inlet-outlet enthalpy table. ii)Show the stoichiometric equation for the reaction in the...
Methane gas is burned completely with 30% excess air in a furnace operating at one atmosphere....
Methane gas is burned completely with 30% excess air in a furnace operating at one atmosphere. Both the methane and air enter the furnace at 40ºC saturated with water vapor. The flue gas (furnace exhaust) leaves the furnace at 1000ºC. The flue gas then passes through a heat exchanger and emerges at 60ºC. If 260 mole/sec of methane fed to the furnace, how much heat is lost from the furnace, and how much heat is transferred in the heat exchanger?...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT