Question

The irreversible gas phase rxn, A=> B+C is performed in an adiabatic, 800-liter PFR with a...

The irreversible gas phase rxn, A=> B+C is performed in an adiabatic, 800-liter PFR with a rate constant, k, as below:

k=60*exp(-5000/T) s-1

The feed is pure A at 15 bar and 450 K with a volumetric flow rate of 1.956 L/s. The heat of rxn is -12 kJ/mol (independent of temperature), heat capacities are CPA = 40 J/mol/K, CPB = 15 J/mol/K, and CPC = 25 J/mol/K. The reaction is operated at constant pressure

Plot (a) FA and FB versus reactor volume

        (b) Temperature versus reactor volume

        (c) volumetric flow rate versus reactor volume

Use Polymath to show these three plots and explain what you observe.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The elementary liquid phase reaction takes place in an adiabatic flow reactor. ? + ? →...
The elementary liquid phase reaction takes place in an adiabatic flow reactor. ? + ? → ? An equimolar feed in A and B enters at 300K, and the volumetric flow rate is 2 dm3 /s and CA0= 100 mol/m3 . a) Calculate the PFR and CSTR volumes to achieve 75 % conversion. b) If the outlet temperature of the reactor is 550 K, for complete conversion, calculate the inlet temperature of CSTR. HA°(273 K) = - 20 kcal/mol, HB°...
The elementary irreversible organic liquid-phase reaction, A + B → C, is carried out in a...
The elementary irreversible organic liquid-phase reaction, A + B → C, is carried out in a flow reactor. An equal molar feed in A and B enters at 27 oC, and the volumetric flow rate is 2 L/s. The feed concentration is CA0 = 0.1 mol/L. a) Calculate the PFR and CSTR volumes necessary to achieve 85% conversion when the reaction is carried out adiabatically. b) What is the maximum inlet temperature one could have so that the boiling point...
Consider a plug flow reactor with a reversible isothermal gas-phase reaction: A + B <--> C...
Consider a plug flow reactor with a reversible isothermal gas-phase reaction: A + B <--> C The reactor feed consists of a mixture of 50% A and 50% B. The reaction rate is: (-rA) = k1*CA*CB - k2*CC2 The inlet temperature is 500 K and the total pressure is 200 kPa. The volumetric feed flow rate is 10 m3/s. The rate constants have a values of: k1 = 0.1 m3/(mol*s) and k2 = 0,05 m3/(mol*s). a) Calculate the conversion of...
he elementary liquid-phase reaction: A + B -----> C is to be carried out non-isothermally in...
he elementary liquid-phase reaction: A + B -----> C is to be carried out non-isothermally in a flow system with reaction constant,k= 0.07 dm^3mol-1min-1at 300K. The concentrations of each feed stream of A and B is 2 mol dm-3. The volumetric flow rate of each feed stream is 5 dm^3min-1. The two steams are mixed immediately prior to entering the reactor system. This flow system is conducted at 300K with two reactors: a 200 dm^3 stainless steel CSTR and an...
The reversible first-order gas reaction ??? is to be carried out in a mixed flow reactor....
The reversible first-order gas reaction ??? is to be carried out in a mixed flow reactor. For operations at 300 K the volume of reactor required is 100 liters for 60% conversion of A. 4.1. What is the value of the reverse rate constant at 300K? 4.2. What is the equilibrium conversion at 300 K? 4.3. What is the equilibrium conversion at 400 K? 4.4. What should be the volume of the reactor for the same feed rate and conversion...
The irreversible gas-phase non-elementary reaction A + 2B ---> C takes place in an isothermal (227...
The irreversible gas-phase non-elementary reaction A + 2B ---> C takes place in an isothermal (227 C) constant-volume batch reactor. The initial feed to the reactor consists of 40 mol% A and 60 mol% B at a total pressure of 10 atm. Measurements of the rate of reaction as a function of conversion yielded the following results: -rA (mol dm^-3 s^-1) x (1x10^8) 0.010 0.005 0.002 0.001 XA   0.0 0.2 0.4 0.6 Calculate the time required to achieve a conversion...
The elementary gas phase reaction A + B C is to be carried out isothermally in...
The elementary gas phase reaction A + B C is to be carried out isothermally in a continuous reactor. Reactants are entering with a stoichiometric proportions at 10 atm and 130°C molar flow rate of 20 mol/min. The exit conversion is 90%. The following data was collected from experimental work T, K kA (min-1) 360 5.38 368 8.35 376 12.73 385 16.34 395 21.23 410 28.61 425 33.81 Estimate the rate constant and the activation energy Calculate the required volume...
Question 2 : Consider the following gas phase reactions: (flow reactor) Rxn 1 : A X  ...
Question 2 : Consider the following gas phase reactions: (flow reactor) Rxn 1 : A X   k1 = 0.004 (mol/dm3)1/2.min-1 Rxn 2 : A B - k2 = 0.3 min-1. Rxn 3 : A Y k3 = 0.25 dm3/mol/min B is the desired product and X and Y are the foul pollutants that are expensive to get rid of. The specific reaction rates are at 27 oC ( 300K). The reaction system is to be operated at 27 oC and...
The irreversible gas-phase reaction A + B ----> C is carried out in an isothermal (400...
The irreversible gas-phase reaction A + B ----> C is carried out in an isothermal (400 C) constant-pressure (1 atm) batch reactor in the presence of inerts (I). The initial gas composition in mole fractions is given by yA0 = 0.40; yB0 = 0.40; yC0 = 0.10; yI = 0.10. The reaction is first-order both in A and in B with a rate constant, k = 3.46 x10-2 dm3mol-1 s-1 at 400 C. (a) Set up a stoichiometric table. (b)...
A liquid-phase reaction A---> B is to be conducted in a CSTR at steady-state at 163°C....
A liquid-phase reaction A---> B is to be conducted in a CSTR at steady-state at 163°C. The temperature of the feed is 20°C, and 90% conversion of A is required. Determine the volume of a CSTR (L) to produce 130 kg of B per hour, and calculate the heat load (kW) for the process. Does this represent addition or removal of heat from the system? Data: cp,A = 2.0 J/g·K MW of A = 200 g/mol ? = 0.95 g/cm3...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT