Question

A fuel gas containing 40.00 mole% methane and the balance ethane is burned completely with pure...

A fuel gas containing 40.00 mole% methane and the balance ethane is burned completely with pure oxygen at 25.00°C, and the products are cooled to 25.00°C.

A. Suppose the reactor is continuous. Take a basis of calculation of 1.000 mol/s of the fuel gas, assume some value for the percent excess oxygen fed to the reactor (the value you choose will not affect the results), and calculate -Q?(kW), the rate at which heat must be transferred from the reactor if the water vapor condenses before leaving the reactor and if the water remains as a vapor.

B. Now suppose the combustion takes place in a constant-volume batch reactor. Take a basis of calculation 1.000 mol of the fuel gas charged into the reactor, assume any percent excess oxygen, and calculate –Q(kJ) for the cases of liquid water and water vapor as products.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A fuel gas containing 15.00 mole% methane and the balance ethane is burned completely with pure...
A fuel gas containing 15.00 mole% methane and the balance ethane is burned completely with pure oxygen at 25.00°C, and the products are cooled to 25.00°C. Suppose the reactor is continuous. Take a basis of calculation of 1.000 mol/s of the fuel gas, assume some value for the percent excess oxygen fed to the reactor (the value you choose will not affect the results), and calculate -Q (kW), the rate at which heat must be transferred from the reactor if...
A fuel gas containing 75.0 mole% methane and the balance ethane is burned completely with 35.0%...
A fuel gas containing 75.0 mole% methane and the balance ethane is burned completely with 35.0% excess air. The stack gas leaves the furnace at 800.0°C and is cooled to 350.0°C in a waste-heat boiler, a heat exchanger in which heat lost by cooling gases is used to produce steam from liquid water for heating, power generation, or process applications. Take as a basis 100.0 mol of the fuel gas fed to the furnace. The amounts of each of the...
8.27 A fuel gas containing 95.0 mole% methane and the balance ethane is burned completely with...
8.27 A fuel gas containing 95.0 mole% methane and the balance ethane is burned completely with 15.0% excess air. The stack gas leaves the furnace at 800.0°C and is cooled to 450.0°C in a waste-heat boiler, a heat exchanger in which heat lost by cooling gases is used to produce steam from liquid water for heating, power generation, or process applications. A. Take as a basis 100.0 mol of the fuel gas fed to the furnace. Calculate the amounts of...
A fuel gas containing 74.0% methane, 12.0% ethane, and 14.0% propane by volume flows to a...
A fuel gas containing 74.0% methane, 12.0% ethane, and 14.0% propane by volume flows to a furnace at a rate of 1450 m3/h at 15.0°C and 180.0 kPa (gauge), where it is burned with 16.0% excess air. Calculate the required flow rate of air in SCMH (standard cubic meters per hour). You may take the composition of air to be 21.0 mol% O2 and the balance N2.
a gas conatins 75.0wt% methane, 10.0% ethane, 5.0% ethylene, and the balance water a) calculate the...
a gas conatins 75.0wt% methane, 10.0% ethane, 5.0% ethylene, and the balance water a) calculate the molar composition of this gas on both wet and dry basis and the ratio (mol h2o/mol dry gas) b ) if 100kg/h of this fuel is to be burned with 30% excess air, what is the required air feed rate (kmol/h)? how would the answer change if the combustion were only 75% complete?
A particular natural gas consists, in mole percents, of 83.0% CH4 (methane), 11.2% C2H6 (ethane), and...
A particular natural gas consists, in mole percents, of 83.0% CH4 (methane), 11.2% C2H6 (ethane), and 5.80% C3H8 (propane). A 385-L sample of this gas, measured at 25 ∘C and 729 mmHg , is burned in an excess of oxygen gas. How much heat, in kilojoules, is evolved in this combustion reaction? Express your answer with the appropriate units. The table shown here gives the enthalpy of combustion for three different hydrocarbon fuels to produce liquid water and gaseous carbon...
Natural Gas (1 mol/s) composed of 85 mol% methane, 8 mole% ethane and 7 mol% CO2...
Natural Gas (1 mol/s) composed of 85 mol% methane, 8 mole% ethane and 7 mol% CO2 is used to generate heat in a boiler. The fuel is fed to the boiler with 25% excess air that has a relative humidity of 35%. Both natural gas and humid air are fed at 250C. Heat from the combustion is transferred to liquid water that enters the heat exchanger as a liquid at 250C and leaves as a vapor at 1 bar and...
A natural gas mixture of methane (CH4) and ethane (C2H6) are used for the fuel source...
A natural gas mixture of methane (CH4) and ethane (C2H6) are used for the fuel source for generation of steam in a refinery plant.In this process,The gas stream mixture 1000kg/min having 70wt% CH4 and 30wt% C2H6 is burned with 100% excess air.Gas analysis shows that the CH4 and 85% C2H6 are completely burned into carbon dioxide , while 10% C2H6 is partially burned into carbon monoxide and the remaining C2H6 is unreacted. Assume the air stream feed to the furnace...
Methane gas is burned completely with 30% excess air in a furnace operating at one atmosphere....
Methane gas is burned completely with 30% excess air in a furnace operating at one atmosphere. Both the methane and air enter the furnace at 40ºC saturated with water vapor. The flue gas (furnace exhaust) leaves the furnace at 1000ºC. The flue gas then passes through a heat exchanger and emerges at 60ºC. If 260 mole/sec of methane fed to the furnace, how much heat is lost from the furnace, and how much heat is transferred in the heat exchanger?...
Methane is burned with 25% excess air in a continuous adiabatic reactor. The methane enters the...
Methane is burned with 25% excess air in a continuous adiabatic reactor. The methane enters the reactor at 25°C and 1.10 atm at a rate of 550 L/s, and the entering air is at 150°C and 1.1 atm. Combustion in the reactor is complete, and the reactor effluent gas emerges at 1.05 atm. (a) Calculate the temperature and the degrees of superheat of the reactor effluent. (Consider water to be the only condensable species in the effluent.) (b) Suppose only...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT