Question

The uncontrolled emission rate of SO2 from a power plant is 80 kg/ton and the controlled...

The uncontrolled emission rate of SO2 from a power plant is 80 kg/ton and the controlled emission rate is 5 kg/ton.What is collection efficiency.

Homework Answers

Answer #1

Collection efficiency is the measure of the overall performance of the air cleaning device. It refers to the percentage of emissions entering the air control equipment that are collected by the equipment and are thus removed from the exhaust stream.

Collection efficiency is given as the weight of material collected to total weight of input given to the collector.

As given in the question, the uncontrolled emission rate of SO2 is 80 kg/ton and the controlled rate is 5 kg/ton. This means the collector has removed (80-5) kg/ton = 75 kg SO2/ton of air for 80kg SO2/ton of air supplied to collector.

Collector efficiency = (weight of SO2 removed)/ (weight of SO2 in air entering the collector) X 100

= 75/80 X 100 = 93.75 %

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Fuel selection for electricity generation 1. Uncontrolled emission factors and heating value data for bituminous coal,...
Fuel selection for electricity generation 1. Uncontrolled emission factors and heating value data for bituminous coal, residual fuel oil and natural gas burned in utility boilers are given in Table 1. Consider a thermal electric power plant that generates an average of 400 MW of electricity with an overall efficiency of 35%. Determine for each fuel the annual uncontrolled mass of each of the pollutants (in units of metric tonnes per year) that would be emitted from such a power...
A coal-fired power plant (PP) has a rated power of 1000 MWe. It works at 100%...
A coal-fired power plant (PP) has a rated power of 1000 MWe. It works at 100% capacity (base-loaded) at a thermal efficiency of 35%. It burns coal having a heating value of 30 MJ/kg and a sulfur content of 2% by weight, a nitrogen content of 1% by weight, and a mineral (ash) content of 10% by weight. b) How much coal does the PP consume per year (ton/yr) ? 3*106 tons/yr c) How much SO2 does the PP emit...
A municipal solid waste incinerator has an emission factor of 20 lbs PM/ton of waste. Assume...
A municipal solid waste incinerator has an emission factor of 20 lbs PM/ton of waste. Assume that the maximum two-hour permissible emission level is 0.18 g/m3 . If 80 dry standard cubic feet of flue gas are produced per pound of waste combusted, determine the control equipment collection efficiency needed to meet the emission limit. 1 ton = 2000 lb. 1 lb = 454 g. 1 ft 3 =28.3 L. PM = particulate matter.
a) At standard conditions, the exhaust gas from a well-controlled coal-burning power plant contains 5 ppmv...
a) At standard conditions, the exhaust gas from a well-controlled coal-burning power plant contains 5 ppmv sulfur dioxide (SO2). At STP (0° C and 1 atm), determine the concentration of SO2 emitted on a µg/m3 basis. b) What is the equilibrium concentration of a gas in water if its partial pressure is 0.1 atm and its Henry’s law constant is 0.1 mole/(liter.atm)?
A power plant burns 100 metric tons of coal per day with a sulfur content of...
A power plant burns 100 metric tons of coal per day with a sulfur content of 5%. The coal contains 3% ash (noncombustible portion). Samples of the ash show that it has a sulfur content of 10% sulfur by weight. Sulfur that is not in the ash is in the flue gases. How many metric tons of SO2 are emitted from the smoke stack each day? (Hint: Apply mass balance to find the amount of sulfur leaving the power plant...
An experimental power plant at the Natural Energy Laboratory of Hawaii generates electricity from the temperature...
An experimental power plant at the Natural Energy Laboratory of Hawaii generates electricity from the temperature gradient of the ocean. The surface and deep-water temperatures are 28 ∘C and 5 ∘C, respectively. Part A What is the maximum theoretical efficiency of this power plant? Part B If the power plant is to produce a power of 220 kW , at what rate must heat be extracted from the warm water? Assume the maximum theoretical efficiency. Part C At what rate...
n experimental power plant at the Natural Energy Laboratory of Hawaii generates electricity from the temperature...
n experimental power plant at the Natural Energy Laboratory of Hawaii generates electricity from the temperature gradient of the ocean. The surface and deep-water temperatures are 28°C and 6°C, respectively. (a) What is the maximum theoretical efficiency of this power plant? % (b) If the power plant is to produce 200 kW of power, at what rate must heat be extracted from the warm water? Assume the maximum theoretical efficiency. MW At what rate must heat be absorbed by the...
A nuclear power plant has an electrical power output of 1400 MW and operates with an...
A nuclear power plant has an electrical power output of 1400 MW and operates with an efficiency of 33%. If excess energy is carried away from the plant by a river with a flow rate of 1.0 ? 106 kg/s, what is the rise in temperature of the flowing water? °C
A nuclear power plant operates at 80 percent of its maximum theoretical (Carnot) efficiency between temperatures...
A nuclear power plant operates at 80 percent of its maximum theoretical (Carnot) efficiency between temperatures of 580oC and 270°C. If the plant produces electric energy at the rate of 1.45 Giga-Watts, how much exhaust heat is discharged per hour?
A nuclear power plant operates at 80 percent of its maximum theoretical (Carnot) efficiency between temperatures...
A nuclear power plant operates at 80 percent of its maximum theoretical (Carnot) efficiency between temperatures of 600oC and 330°C. If the plant produces electric energy at the rate of 1.55 Giga-Watts, how much exhaust heat is discharged per hour?