Question

Air at temperature 15 degrees Celsius and the pressure 1 bar enters and compresses to the...

Air at temperature 15 degrees Celsius and the pressure 1 bar enters and compresses to the pressure 15 bar at an isentropic state. Soon, it is heated to 1400 degrees Celsius and ΔV = 0. Then it is allowed to expand isentropically to its initial state again. Calculate what at the end of the expansion step and the compression step the temperature will be. Also calculate the thermal efficiency of the process. We can assume that the combustion engine work cycle is worked by a Otto process.

Engineering   Chemical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Air at temperature 15 degrees Celsius and the pressure 1 bar enters and compresses to the...
Air at temperature 15 degrees Celsius and the pressure 1 bar enters and compresses to the pressure 15 bar at an isentropic state. Soon, it is heated to 1400 degrees Celsius and ΔV = 0. Then it is allowed to expand isentropically to its initial state again. Calculate what at the end of the expansion step and the compression step the temperature will be. Also calculate the thermal efficiency of the process. We can assume that the combustion engine work...
air pressure of 103 kPa., entering the compressor at a temperature of 15 degrees Celsius and...
air pressure of 103 kPa., entering the compressor at a temperature of 15 degrees Celsius and a low speed. 1 mPa pressure, 336 degrees Celsius temperature and 106 m / s speed is coming out of the compressor. The compressor is cooled by air at a temperature of 15 degrees Celsius and 26 kW. The power input to the compressor is 298 kW. (cp= 1.005kj/kgK , R=0.287 kj/kgK) a) Find the mass flow of air b) calculate the irreversibility in...
A) 1 kg of air with a pressure of 13 bar and a temperature of 125...
A) 1 kg of air with a pressure of 13 bar and a temperature of 125 ° C is heated as isobar up to 550 ° C. a) Work done during heating, b) Internal energy and enthalpy change, c) Calculate the amount of heat consumed. (R = 287 j / kgK, x = 1,4) B) An ideal gas with a pressure of 1 bar and a volume of 0.5m³ is compressed isothermally up to 17 bar pressure. Calculate the volume...
The compression ratio of an engine is 10 and the temperature and pressure at the start...
The compression ratio of an engine is 10 and the temperature and pressure at the start of compression is 370 Celcius degree and 1 bar. The compression and expansion processes are both isentropic and the heat rejected at exhaust at constant volume. The amount of heat added during the cycle is 3000 kJ/kg. Determine the mean effective pressure and thermal efficiency of the cycle if the maximum pressure is limited to 70 bar and heat added at both constant volume...
The Assignment: Water at a pressure of 15 bar at a temperature of 30°C enters a...
The Assignment: Water at a pressure of 15 bar at a temperature of 30°C enters a boiler, where it is heated to 250°C at constant pressure. Steam leaving the boiler passes into a throttle which reduces the pressure to 10 bar. The steam is then passed through a small turbine, exiting at atmospheric pressure at 110°C. Please draw a schematic diagram. 1. How much heat is added per kg to the water by the boiler? 2. Find the temperature of...
At the beginning of the compression process of an air-standard Otto cycle, p1 = 1 bar...
At the beginning of the compression process of an air-standard Otto cycle, p1 = 1 bar and T1 = 300 K. The compression ratio is 6 and the heat addition per unit mass of air is 1500 kJ/kg. Determine: (a) the maximum temperature of the cycle, in K. (b) the net work, in kJ/kg. (c) the percent thermal efficiency of the cycle. (d) the mean effective pressure, in kPa.
An open cycle gas turbine using a regenration arrangement. The air enters the compressor at 1...
An open cycle gas turbine using a regenration arrangement. The air enters the compressor at 1 bar 288 K and is compressed to 10 bar with compressor effieciency= 0.85. The air is heated in regenerator and then enter in combustion chamber its temperature is raised ny 1700 k and during the process the pressure falls by 0.2 bar. The air is then expanded in the turbine and passes to regenerator which has 0.75 effectiveness and cause a pressure drop of...
A single shaft gas turbine engine receives air at atmospheric conditions of 14.7 psia and 80...
A single shaft gas turbine engine receives air at atmospheric conditions of 14.7 psia and 80 degrees F. The compressor discharge pressure is 103psia and the compressor efficiency is 87%. The turbine inlet temperature is 1980 degrees F and the exhaust temperature is 1173 degrees F. Assume a 3 psi pressure drop in the combustion chamber and that inlet and exhaust ducts losses are both 27.7 inches of water. Find: a) Sketch the system and label the state point locations...
1a. An air-standard cycle consists of the following processes: isentropic compression from 15 ?C, 1.01 bar...
1a. An air-standard cycle consists of the following processes: isentropic compression from 15 ?C, 1.01 bar through a compression ratio of 5:1; heat addition at constant volume of 2600 kJ/kg; isentropic expansion to the initial volume; heat rejection at constant volume. Sketch the cycle on p-v and T-s diagrams, and calculate its ideal efficiency, mean effective pressure and peak pressure. Answers(0.475, 18.9 bar, 73.0 bar) b. The cycle is problem (a) is modified so that the heat is added (a)...
1) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the...
1) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the compression process, the temperature is 20°C, and the pressure is 100 kPa. The heat added is 500 kJ/kg. Determine the cycle efficiency, work output, and the heat rejected 2) An air-standard Otto cycle operates with a minimum temperature of 300 K and a maximum temperature of 1700 K. The compression ratio of the cycle is 7. At the beginning of the compression process, the...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT