Question

Question 2 (Excel) A single stage RO desalination system has the following design data: - Water...

Question 2 (Excel)

A single stage RO desalination system has the following design data:
- Water permeability = 2.05xl0-6 m3/m2.s.kPa - Salt permeability = 2.03x10-5 m3/m2.s
- Feed salinity = 44.0 g/L
- Feed flow rate = 3.5 kg/s
- Permeate flow rate = 120 kg/min - Feed pressure = 7500 kPa
- Reject pressure = 63.0 atm
- Permeate pressure = 1.1 bar
Calculate permeate salinity, brine salinity, brine flow rate, and membrane area. Assume the deviation between the density of feed/brine and pure water can be neglected.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Design a single stage RO desalination system by calculating the permeate salinity, the brine salinity, the...
Design a single stage RO desalination system by calculating the permeate salinity, the brine salinity, the brine flow rate, and the membrane area. Analyze the following cases: Data Water permeability is 2.05xl0-6 m3/m2 s kPa Salt permeability is 2.03x10-5 m3/m2 s Feed salinity is 34,000 ppm Feed flow rate: 2.5 kg/s Permeate flow rate: 1 kg/s Feed pressure: 6000 kPa Reject pressure: 5800 kPa Permeate pressure: 101 kPa
1. Rand water research committee consisting of 12 chemical engineers design a reverse-osmosis plant to recover...
1. Rand water research committee consisting of 12 chemical engineers design a reverse-osmosis plant to recover 30 % of the seawater feed water as portable water. The permeate pressure used is five time less than the feed side pressure. The total spiral wound membrane surface area is 464000 m2 for a single stage crossflow. Calculate the salt passage and water permeance given the characteristic of the feed water, permeate and final brine as in table below. Flow rate Concentration Pressure...
4.1A membrane made of 0.1 mm thick soft rubber separates pure O2 at 1 atm and...
4.1A membrane made of 0.1 mm thick soft rubber separates pure O2 at 1 atm and 25oC from air at 1.2 atm pressure. Determine the mass flow rate of O2 through the membrane per unit area and the direction of flow. Molar flow rate of oxygen is given by: ???? = ???????? / ??? (????1 ? ????2 ) where S is solubility of oxygen in rubber. The mass diffusivity of oxygen in rubber at 298 K is DAB = 2.1...