Question

A lubricating line with e/D = 2 x 10-5 has an inside diameter of 0.5 in...

A lubricating line with e/D = 2 x 10-5 has an inside diameter of 0.5 in and is 30 in. long. If the pressure drop is 15 psi, determine the flow rate of oil(ft3/s). The oil has a kinematic viscosity of 0.07 x 10-3 ft2/s and a density of59 lbm/ft3.

Engineering   Chemical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Design a cast iron (kd=8*10‐4 ft) pressurized system (pipe diameter) that would convey water at 2...
Design a cast iron (kd=8*10‐4 ft) pressurized system (pipe diameter) that would convey water at 2 ft3/s from two elevated tanks separated 200 ft long. The difference in water surface elevation between the tanks is 20 ft and the kinematic viscosity is 1.217*10‐5 ft2/s. Along the system the entrance loss and the exit loss have a KL of 0.5 and 1, respectively. Two 90 degrees bends are present (KL=3) and a global valve (KL=10) is also installed along the system.
The large blood vessel leading from the human heart, the aorta, has an inside diameter of...
The large blood vessel leading from the human heart, the aorta, has an inside diameter of 1.0 cm and a length of 40 cm. The flowing blood (SG = 1.06) has a viscosity of 3.5 CP and an average velocity of 60 cm/s. Find the pressure drop across the aorta, if it is (a) horizontal, (b) vertical with upward flow, and (c) vertical with downward flow.
A 2 m long pipe with a diameter of 30 cm carries a fluid of density...
A 2 m long pipe with a diameter of 30 cm carries a fluid of density 1051 kg/m3 and kinematic viscosity of 1.72 X 10^-5 m2/s . If the fluid in the center of the pipe is traveling at 5.5 m/s, what is the force needed to keep the pipe in place. Use the Blassius solution where needed.
Oil at a rate of 300 gal/min is flowing steadily from tank A to tank B...
Oil at a rate of 300 gal/min is flowing steadily from tank A to tank B through 3000 ft of 3-in schedule 40 pipe (Appendix A.2). The inside diameter (ID) of 3-in schedule pipe is 3.068 in. The line contains two globe valves, a swing check valve, an a nine 90oC elbows. The oil has a density of 62.3 lbm/ft3 and a viscosity of 50 cP. The levels of the free surfaces are the same in both tanks. Tank B...
A 250 mm diameter of cast iron pipe flows 39.3 L/s of SAE 10 oil along...
A 250 mm diameter of cast iron pipe flows 39.3 L/s of SAE 10 oil along 500 m length. Given: dynamic viscosity, μ and density, ρ of SAE 10 oil are 1.04 x 10-1 Ns/m2 and 917 kg/m3 respectively. By assuming the flow is laminar, determine energy head and pressure loss due to pipe friction using Hagen-Poiseuille equation and friction factor, f.
A conventional, rectangular flocculation basin is 38 ft. wide, 90 ft. long and 16 ft. deep....
A conventional, rectangular flocculation basin is 38 ft. wide, 90 ft. long and 16 ft. deep. The flow through the basin is 24 mgd and the water horsepower input by the reel type paddles is 15 hp. The dynamic viscosity of water is 2.73 E -5 lb/sec/ft2 at 50 degrees Fahrenheit. The flocculation basin in above is followed by four sedimentation basins which operate in parallel.   Each basin is 30 ft. wide, 240 ft. long and has an effective settling...
A particular swimming pool has one inlet and one outlet pipe. The diameter of the inlet...
A particular swimming pool has one inlet and one outlet pipe. The diameter of the inlet pipe is 1 cm. The diameter of the outlet pipe is 10 cm. The average velocity of the flow in both inlet and outlet pipes is 0.1 m/s. The pipes are very old and rusty, so e = 0.2 mm. The dynamic viscosity is 1 x 10-3 N-s/m^2 The kinematic viscosity is 1 x 10-6 m^2/s (A) What’s the head loss per meter of...
A) Neptune has a mass of 1.0 x 10^26 and a diameter of 49,532,000. What is...
A) Neptune has a mass of 1.0 x 10^26 and a diameter of 49,532,000. What is the radius and g(m/s^2)? B) Pluto has a mass of 1.3 x 10^22 and a diameter of 2,306,000. What is the radius and g(m/s^2)? C) Sun has a mass of 2.0 x 10 ^30 and a diameter of 1,392,000,000. What is the radius and g(m/s^2)? D) Moon has a mass of 7.3 x 10^22 and a diameter of 3,475,000. What is the radius and...
There is a gas cylinder filled with oxygen in front of you. It is 1.5 meters...
There is a gas cylinder filled with oxygen in front of you. It is 1.5 meters tall and 30 cm in diameter. The oxygen within the culinder has dropped to a gauge pressure of 2.52x10^6 Pa at a temperature of 20 C. This pressure is insufficient to ventilate a patient in respiratory distress. Youdo not have another oxygen cylinder present, and without oxygen the patient will die. a. To maintain minimal ventilation, the pressure must be raised to a gauge...
A shallow alluvium aquifer (predominantly sandy material) of 5 km 2 of area has the following...
A shallow alluvium aquifer (predominantly sandy material) of 5 km 2 of area has the following characteristics: average water level from the bottom of the aquifer = 10 m, porosity of 40%, specific yield of 25%, permeability of 0.5 Darcy units, compressibility of water is 4.6x10 -10 m 2 /N and compressibility of the solid material is 1.8x10 -8 m 2 /N, water density is 1000 kg/m 3 , and kinematic viscosity is 1.0x10 -6 m 2 /s. Determine: (a)...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT