Question

C2H6 is burned with 50 % excess air. If the fuel feed flow rate is 10...

C2H6 is burned with 50 % excess air. If the fuel feed flow rate is 10 kg/s, find the equivalence ratio, then by using it find the air flow rate in kg/s. (C=12 , H=1, O=16, Air=29).

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A natural gas mixture of methane (CH4) and ethane (C2H6) are used for the fuel source...
A natural gas mixture of methane (CH4) and ethane (C2H6) are used for the fuel source for generation of steam in a refinery plant.In this process,The gas stream mixture 1000kg/min having 70wt% CH4 and 30wt% C2H6 is burned with 100% excess air.Gas analysis shows that the CH4 and 85% C2H6 are completely burned into carbon dioxide , while 10% C2H6 is partially burned into carbon monoxide and the remaining C2H6 is unreacted. Assume the air stream feed to the furnace...
Ethane (C2H6) is burned with 50% excess air. The reactions are as follows: C2H6 + O2...
Ethane (C2H6) is burned with 50% excess air. The reactions are as follows: C2H6 + O2  CO2 + H2O C2H6 + O2  CO + H2O 90% of the ethane entered the reactor was consumed. Of the ethane consumed, 75% reacted to form CO2, and the other 25% reacted to form CO. Calculate the composition of the flue gas.
A fuel containing 40 mol% CH4 and 60 mol% C2H6 enters a furnace at a rate...
A fuel containing 40 mol% CH4 and 60 mol% C2H6 enters a furnace at a rate of 100 mol/s, at 300C and Pabs=5 atm. Incomplete combustion occurs in the furnace. Air is fed to the furnace at 20% excess. (a)What is the partial pressure of CH4 ?__________ (b)What is the volumetric flow rate of the fuel ?__________ c) Calculate the feed rate of oxygen, in mol/s___________________ d) Calculate the feed rate of air, in mol/s___________________
15kg / h of Propane should be burned with 15% excess air. 2.1.-Determine the air /...
15kg / h of Propane should be burned with 15% excess air. 2.1.-Determine the air / fuel ratio to be used. 2.2.-Determine the amount of water, kg / h that produces the combustion. 2.3.-Determine the amount of burned gases, kg / h that combustion produces.
A fuel gas produced by gasifying coal is to be burned with 20% excess air. The...
A fuel gas produced by gasifying coal is to be burned with 20% excess air. The gas contains 50.0 mole % nitrogen and the balance carbon monoxide and hydrogen. A sample of the gas is passed through an infrared spectrometer, which registers a signal R that depends on the mole fraction of carbon monoxide in the sample, and a reading R 38:3 is recorded. Analyzer calibration data are as follows: x (mol CO/mol) 0.05 0.10 0.40 0.80 1.00 R 10.0...
A fuel gas produced by gasifying coal is to be burned with 20% excess air. The...
A fuel gas produced by gasifying coal is to be burned with 20% excess air. The gas contains 50.0 mole % nitrogen and the balance carbon monoxide and hydrogen. A sample of the gas is passed through an infrared spectrometer, which registers a signal R that depends on the mole fraction of carbon monoxide in the sample, and a reading R 38:3 is recorded.  Analyzer calibration data are as follows: x (mol CO/mol) 0.05 0.10 0.40 0.80 1.00 R 10.0 17.0...
Two kmol of ethane (C2H6) is burned with an unknown amount of air during a combustion...
Two kmol of ethane (C2H6) is burned with an unknown amount of air during a combustion process. An analysis of the combustion products reveals that the combustion is complete, and there are 4 kmol of free O2 in the products. Determine (a) the air–fuel ratio and (b) the percentage of theoretical air used during this process (c) The equivalent ratio
Two kmol of ethane (C2H6) is burned with an unknown amount of air during a combustion...
Two kmol of ethane (C2H6) is burned with an unknown amount of air during a combustion process. An analysis of the combustion products reveals that the combustion is complete, and there are 4 kmol of free O2 in the products. Determine (a) the air–fuel ratio and (b) the percentage of theoretical air used during this process (c) The equivalent ratio
One kg of methane (CH4) is burned with 200% theoretical air. What is the air-fuel ratio...
One kg of methane (CH4) is burned with 200% theoretical air. What is the air-fuel ratio on a mass basis? Mair=29kg/kmol; MCH4=16 kg/kmol
1. 20 kg/s of propane is burned with 50% excess air. Both streams are at 100oC...
1. 20 kg/s of propane is burned with 50% excess air. Both streams are at 100oC when entering the combustion chamber. 80% of the propane is burned and 90% of the burned propane goes to CO2 and the remainder to CO. If the gases exit the combustion chamber at 1300oC what is the rate of heat production? (Note: All the species are gases. Use mean heat capacities or the first term of the cp expression for this problem)
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT