Question

1. 20 kg/s of propane is burned with 50% excess air. Both streams are at 100oC...

1. 20 kg/s of propane is burned with 50% excess air. Both streams are at 100oC when entering the combustion chamber. 80% of the propane is burned and 90% of the burned propane goes to CO2 and the remainder to CO. If the gases exit the combustion chamber at 1300oC what is the rate of heat production? (Note: All the species are gases. Use mean heat capacities or the first term of the cp expression for this problem)

Homework Answers

Answer #1


Almost all type of combustion reaction are solve by Hess cycle law you just need to balace the unit and maa as well as material balance plays a important role here.In this solving problem because there is lack of data like standard heat of formations or components and specific heat data i solve the important needs which required there if we get the data then just putting those all in last equation we can get the solution.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Propane (C3H8) is burned with excess air, both supplied at 25C. Assume that air is 21%...
Propane (C3H8) is burned with excess air, both supplied at 25C. Assume that air is 21% oxygen, balance nitrogen. Part 1 : If 1.0 mol of propane is burned with x mols of air, how many mols of oxygen appear in the combustion products? A. 3.0 + 0.21x B. 4.0 + 0.79x C. 0.79x D. 0.21x – 5.0 . Part 2 : The standard heat of combustion for propane A. depends on the state of the water in the products...
Propane gas is burned using air, both are at 25c and 1 atm. excess air is...
Propane gas is burned using air, both are at 25c and 1 atm. excess air is used. The products of combustion are carbon dioxide(gas) and vapor water along with excess oxygen and nitrogen exit the reactor at 1520 k. Predict the percentage of excess air (in % units not fractional) used in the steady flow combustion chamber. (Correct answer is 100% - please explain and show why)
15kg / h of Propane should be burned with 15% excess air. 2.1.-Determine the air /...
15kg / h of Propane should be burned with 15% excess air. 2.1.-Determine the air / fuel ratio to be used. 2.2.-Determine the amount of water, kg / h that produces the combustion. 2.3.-Determine the amount of burned gases, kg / h that combustion produces.
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air...
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air (ie 250% of the theoretical air) is used. The products of the combustion are carbon dioxide(gas) and vapor water along with the excess oxygen. Predict the adiabatic flame temperature, in degrees K, in the steady-flow combustion chamber. Use the thermodynamic data from your textbook, Appendix E for all the required data.
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air...
Propane gas is burned using air; both are at 25°C and 1 atm. 150% excess air (ie 250% of the theoretical air) is used. The products of the combustion are carbon dioxide(gas) and vapor water along with the excess oxygen. Predict the adiabatic flame temperature, in degrees K, in the steady-flow combustion chamber. Use the thermodynamic data from your textbook, Appendix E for all the required data Textbook: Introductory Chemical Engineering Thermodynamics (Ed. 2) by Elliott, J. Richard, Lira, Carl...
Methane is mixed with air at 20% excess over the stoichiometric requirement and undergoes combustion in...
Methane is mixed with air at 20% excess over the stoichiometric requirement and undergoes combustion in a burner operating at 1 bar. The inlet gases are at 4 oC and the effluent steam is at 1000oC. Determine the amount of heat assuming complete oxidation of methane to carbon dioxide and water. Assume air to be 21% oxygen and 79% nitrogen. For simplicity, assume the heat capacities of the species to be constant and equal to the values given below (in...
1. A combustion chamber is fed with 50 kmol/h of butane and 2000 kmol/h of air....
1. A combustion chamber is fed with 50 kmol/h of butane and 2000 kmol/h of air. Calculate the % excess air used and composition of the gases leaving combustion reactor, assuming complete combustion of butane. 2. In manufacture of chlorine, feed containing hydrochloric acid gas and air are fed to the reactor. The product gases leaving the reactor are found to contain 13.2% HCl, 6.3% 02, 42.9% N2, 30% Cl2 and 7.6% H2O (by weight). Calculate: i) The percent excess...
mixture of 35 mole% pentane (C5H12) and 65 mole% butane (C4H10) is burned with 30% excess...
mixture of 35 mole% pentane (C5H12) and 65 mole% butane (C4H10) is burned with 30% excess air in the furnace of a boiler. Fractional conversions of 0.95 for the pentane and 0.90 for the butane are reported. The mole ratio of CO/CO2, in the combustion gases is found to be 0.05. (a) List the major components that will be present in the product gas stream from the process. [5%] (b) Draw and label fully a PFD for this process. [10%]...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT