Question

A substance is under conditions of pressure and temperature below the critical point, has 50 °...

A substance is under conditions of pressure and temperature below the critical point, has 50 ° C with a Psat = 1.952 kPa, and has a quality of 0.5. If a process is supplied with energy while maintaining constant temperature and pressure, select the option that is false:

The process will end at the critical point

At the beginning the volume of the saturated liquid is equal to the volume of saturated steam

All other options are false

The system can not receive energy if the temperature is constant

The quality will remain at 0.5

Homework Answers

Answer #1

(a) False. The process will not end at critical point Because Temperature remains constant so temperature will not increase.

(b) False. Volume of saturated liquid is much much smaller than saturated vapor

(c) No 1 option is correct

(d) False. The system can recieve energy when Temperature is constant Like in case of phase transformation

when we convert liquid to vapor, the energy is supplied. liquid taking the latent heat and converted to vapor but Temperature and pressure remain constant.

(e) True quality remain same as temperature is not changed.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
DO ALL QUESTIONS STEAM TABLE PROBLEMS For problems 1-9, write the state the water is in....
DO ALL QUESTIONS STEAM TABLE PROBLEMS For problems 1-9, write the state the water is in. Calculate steam quality or degrees of superheat if applicable. 1. What is the specific volume and vapor pressure (saturation pressure) of saturated liquid at 64° C? 2. What is the specific volume and vapor pressure of saturated vapor at 174 °C? 3. What is the quality of wet steam if specific volume V= 8.35 cm3 /g at 10,703 kPa? What is the saturation temperature...
The saturation pressure for an unknown substance has been fitted to temperature using the following Antoine’s...
The saturation pressure for an unknown substance has been fitted to temperature using the following Antoine’s equation: lnPsat = 8.6866 − (2626.42/(T −146.6)) where [Psat] = [bar] and [T] = [K]. Estimate the heat of vaporization of this substance at the normal boiling point.
A mixing chamber has 2 inlets, first, steam water enters at 12 bar and 1173.15 K...
A mixing chamber has 2 inlets, first, steam water enters at 12 bar and 1173.15 K , then, saturated liquid enters at 12 bar and 80 kg/min. The exit conditions are 12 bar and 120 kg/min. Obtain the mass flow rate (kg/s) at which steam water enters, the temperature at the exit (C°) and the quality of substance at the exit. Ignore the changes of kinetic and potencial energy.
a mixing chamber has 2 inlets, first, steam water enters at 12 bar and 1173.15 K...
a mixing chamber has 2 inlets, first, steam water enters at 12 bar and 1173.15 K , then, saturated liquid enters at 12 bar and 80 kg/min. The exit conditions are 12 bar and 120 kg/min. Obtain the mass flow rate (kg/s) at which steam water enters, the temperature at the exit (C°) and the quality of substance at the exit. Ignore the changes of kinetic and potencial energy.
A rigid tank has a volume of 0.01 m3. It initially contains saturated water at a...
A rigid tank has a volume of 0.01 m3. It initially contains saturated water at a temperature of 200 oC and a quality of 0.4. The top of the tank contains a pressure regulating valve which maintains the vapor at constant pressure. This system undergoes a process where it is heated until all the liquid vaporizes. How much heat in (kJ) is required? You may assume there is no pressure drop in the exit line.
Q3. A tank with rigid walls and a volume of 0.05 m3 initially has a two-phase...
Q3. A tank with rigid walls and a volume of 0.05 m3 initially has a two-phase liquid- vapor mixture of ammonia at a pressure of 4 bar and a quality of 10%. The tank is then heated such that the pressure is kept constant through a pressure-regulating valve that allows saturated vapor to escape. The heating continues until the quality of the mixture in the tank is 40%. Assume kinetic and potential energy changes are insignificant. Determine: (i) The final...
Two kg water at 120°C with a quality of 25% has its temperature raised 20°C in...
Two kg water at 120°C with a quality of 25% has its temperature raised 20°C in a constant volume process. According to the thermodynamic tables in your textbook, what is the new specific entropy (in kJ/(kg?K))? -another qustion-: Consider the same ammonia heat engine as problems 6-5 and 6-6, which has the following reversible steps: 1 ? 2 Isothermal heating of saturated liquid @ 60°C to superheated vapor 2 ? 3 Adiabatic expansion to saturated vapor at -20°C 3 ?...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
1) 20 kg/min water at 20º C is mixed adiabatically with 40 kg/min water at 80...
1) 20 kg/min water at 20º C is mixed adiabatically with 40 kg/min water at 80 ºC. What is the outlet water temperature? Select one: a. 80 °C b. 60 °C c. 50 °C d. 70 °C 2) Steam at 0.8 MPa and 500 ºC is throttled over a well insulated valve to 0.6 MPa, what is the outlet temperature Select one: a. 450 ºC b. 500 ºC c. DOF>0 d. 400 ºC 3) Humid air at 70 C and...
1.   Which is not true about autoclaving? a. Autoclaving requires steam under pressure b. Autoclaving requires...
1.   Which is not true about autoclaving? a. Autoclaving requires steam under pressure b. Autoclaving requires maintaining steam at 121oC and 15 psi for 15 minutes c. It is an effective way to pasteurize milk and other liquids d. Steam must come in contact with the surface of the substance being sterilized 2.     We wished to determine the abundance of bacteria in a sample of milk. To do this ten-fold serial dilutions of a one milliliter milk sample were...