Question

Ammonia gas enters a reactor with 30% more dry air (no water vapor) than is required...

Ammonia gas enters a reactor with 30% more dry air (no water vapor) than is required for complete conversion (4NH3 + 5O2 --> 4NO + 6H2O). These gases enter the reactor at 75c and exit at 600c. How much heat is required per mole of ammonia fed?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
4NH3 + 5O2 --> 4NO + 6H2O 1. Nitric acid is made by first reacting ammonia...
4NH3 + 5O2 --> 4NO + 6H2O 1. Nitric acid is made by first reacting ammonia and oxygen to form nitric oxide: NH3 (g)+O2 (g)⟶NO(g)+H2O(g) Calculate the heat of reaction at a) standard conditions (this is what the book calls ∆ ) and b) at 500 °C. (This is what the book calls ∆ ) 2. (Builds off of problem 1). Ammonia gas enters a reactor with 30% more dry air (no water vapor) than is required for complete conversion....
Ammonia is burned to form nitric oxide in the following reaction: 4NH3 + 5O2 ----> 4NO...
Ammonia is burned to form nitric oxide in the following reaction: 4NH3 + 5O2 ----> 4NO + 6H2O The Fractional conversion of oxygen is 0.500 and the inlet flow rates of NH3 is 10 mol/h Oxygen is supplied using air (assume 79:21 - N2:O2) fed to reactor at rate of 710 g/h (a) How much oxygen is fed to the reactor (in mol/h)? (b) Which reactan is in excess and by how much (in %)? (c) Calculate the exit molar...
Benzaldehyde is produced from toluene in the catalytic reaction C6H5CH3 + O2 ? C6H5CHO + H2O...
Benzaldehyde is produced from toluene in the catalytic reaction C6H5CH3 + O2 ? C6H5CHO + H2O Dry air and toluene vapor are mixed and fed to the reactor at 350.0°F and 1 atm. Air is supplied in 100.0% excess. Of the toluene fed to the reactor, 13.0% reacts to form benzaldehyde and 0.100% reacts with oxygen to form CO2 and H2O. The product gases leave the reactor at 379°F and 1 atm. Water is circulated through a jacket surrounding the...
An air-water vapor mixture containing 20% ​​humidity at a dry thermometer temperature of 40 ° C...
An air-water vapor mixture containing 20% ​​humidity at a dry thermometer temperature of 40 ° C A tunnel is fed to the dryer by being heated to 70 ° C. Red pepper samples It is dried in adiabatic conditions. Leave the dryer system saturated For the mixing air-water vapor mixture, find the following. a) 10000 m3 of moist air at 40 ° C (air-water vapor mixture) warmth Required heat to increase to 70 ° C b) Air temperature at dryer...
Methane gas is burned completely with 30% excess air in a furnace operating at one atmosphere....
Methane gas is burned completely with 30% excess air in a furnace operating at one atmosphere. Both the methane and air enter the furnace at 40ºC saturated with water vapor. The flue gas (furnace exhaust) leaves the furnace at 1000ºC. The flue gas then passes through a heat exchanger and emerges at 60ºC. If 260 mole/sec of methane fed to the furnace, how much heat is lost from the furnace, and how much heat is transferred in the heat exchanger?...
4.29 Methane gas is burned completely with 30% excess air at approximately atmospheric pressure. Both the...
4.29 Methane gas is burned completely with 30% excess air at approximately atmospheric pressure. Both the methane and the air enter the furnace at 303.15k saturated with water vapor, and the flue gases leave the furnace at 1773.15K. The flue gases then pass through a heat exchanger from which they emerge at 323.15K per mol of methane, how much heat is lost from the furnace, and how much heat is transferred in the heat exchanger? Please give me your hand!!...