Question

The elementary liquid phase reaction takes place in an adiabatic flow reactor. ? + ? →...

The elementary liquid phase reaction takes place in an adiabatic flow reactor.
? + ? → ?
An equimolar feed in A and B enters at 300K, and the volumetric flow rate is 2 dm3
/s and CA0= 100
mol/m3
.
a) Calculate the PFR and CSTR volumes to achieve 75 % conversion.
b) If the outlet temperature of the reactor is 550 K, for complete conversion, calculate the inlet temperature
of CSTR.
HA°(273 K) = - 20 kcal/mol, HB° (273 K) = - 20 kcal/mol, HP° (273 K) = -41 kcal/mol
CpA= CpB =15 cal/molK, CpC=30 cal/molK k=0.01 dm3
/mols at 300 K, E=10000 cal/mol

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The elementary irreversible organic liquid-phase reaction, A + B → C, is carried out in a...
The elementary irreversible organic liquid-phase reaction, A + B → C, is carried out in a flow reactor. An equal molar feed in A and B enters at 27 oC, and the volumetric flow rate is 2 L/s. The feed concentration is CA0 = 0.1 mol/L. a) Calculate the PFR and CSTR volumes necessary to achieve 85% conversion when the reaction is carried out adiabatically. b) What is the maximum inlet temperature one could have so that the boiling point...
he elementary liquid-phase reaction: A + B -----> C is to be carried out non-isothermally in...
he elementary liquid-phase reaction: A + B -----> C is to be carried out non-isothermally in a flow system with reaction constant,k= 0.07 dm^3mol-1min-1at 300K. The concentrations of each feed stream of A and B is 2 mol dm-3. The volumetric flow rate of each feed stream is 5 dm^3min-1. The two steams are mixed immediately prior to entering the reactor system. This flow system is conducted at 300K with two reactors: a 200 dm^3 stainless steel CSTR and an...
The isothermal and isobaric gas phase reaction A → B + C follows an elementary rate...
The isothermal and isobaric gas phase reaction A → B + C follows an elementary rate law and is to be carried out in a CSTR. The reaction constant k = 1.20 s-1 when the reaction temperature T = 300 K. (a) When pure A is fed to a CSTR at 300K and a volumetric flow rate of 5 dm3 /s,a conversion of X = 0.6 is achieved. Please determine the volume of the CSTR. (b) If the CSTR’s volume...
A→B as shown below takes place in an adiabatic CSTR of 50 L volume. The total...
A→B as shown below takes place in an adiabatic CSTR of 50 L volume. The total molar flow rate is 100 mol/h and the feed is 30% A and 70% inerts. The temperature is 350 K, and its heat capacity of A and inert are 16 cal mol-1 K-1 and heat capacity of B is 20 cal mol-1 K-1. The heat of reaction is - 6000 cal mol-1 and conversion is 0.9. What is the outlet temperature of CSTR?
The irreversible gas phase rxn, A=> B+C is performed in an adiabatic, 800-liter PFR with a...
The irreversible gas phase rxn, A=> B+C is performed in an adiabatic, 800-liter PFR with a rate constant, k, as below: k=60*exp(-5000/T) s-1 The feed is pure A at 15 bar and 450 K with a volumetric flow rate of 1.956 L/s. The heat of rxn is -12 kJ/mol (independent of temperature), heat capacities are CPA = 40 J/mol/K, CPB = 15 J/mol/K, and CPC = 25 J/mol/K. The reaction is operated at constant pressure Plot (a) FA and FB...
Question 2 : Consider the following gas phase reactions: (flow reactor) Rxn 1 : A X  ...
Question 2 : Consider the following gas phase reactions: (flow reactor) Rxn 1 : A X   k1 = 0.004 (mol/dm3)1/2.min-1 Rxn 2 : A B - k2 = 0.3 min-1. Rxn 3 : A Y k3 = 0.25 dm3/mol/min B is the desired product and X and Y are the foul pollutants that are expensive to get rid of. The specific reaction rates are at 27 oC ( 300K). The reaction system is to be operated at 27 oC and...
Consider a plug flow reactor with a reversible isothermal gas-phase reaction: A + B <--> C...
Consider a plug flow reactor with a reversible isothermal gas-phase reaction: A + B <--> C The reactor feed consists of a mixture of 50% A and 50% B. The reaction rate is: (-rA) = k1*CA*CB - k2*CC2 The inlet temperature is 500 K and the total pressure is 200 kPa. The volumetric feed flow rate is 10 m3/s. The rate constants have a values of: k1 = 0.1 m3/(mol*s) and k2 = 0,05 m3/(mol*s). a) Calculate the conversion of...
The reversible first-order gas reaction ??? is to be carried out in a mixed flow reactor....
The reversible first-order gas reaction ??? is to be carried out in a mixed flow reactor. For operations at 300 K the volume of reactor required is 100 liters for 60% conversion of A. 4.1. What is the value of the reverse rate constant at 300K? 4.2. What is the equilibrium conversion at 300 K? 4.3. What is the equilibrium conversion at 400 K? 4.4. What should be the volume of the reactor for the same feed rate and conversion...
The following gas-phase reaction takes place in a plug flow reactor (a tubular reactor) that has...
The following gas-phase reaction takes place in a plug flow reactor (a tubular reactor) that has a diameter of 6 inches and cross-sectional area of 0.0388 ft2: A --> B + C. The reaction rate depends only on the concentration of A, CA, and has the following form: rate of destruction of A = k * CA , where k= 0.12 s-1. The feed consists of pure A, and enters the reactor at a volumetric flowrate of 0.193 ft3/s. Determine...
The elementary gas phase reaction A + B C is to be carried out isothermally in...
The elementary gas phase reaction A + B C is to be carried out isothermally in a continuous reactor. Reactants are entering with a stoichiometric proportions at 10 atm and 130°C molar flow rate of 20 mol/min. The exit conversion is 90%. The following data was collected from experimental work T, K kA (min-1) 360 5.38 368 8.35 376 12.73 385 16.34 395 21.23 410 28.61 425 33.81 Estimate the rate constant and the activation energy Calculate the required volume...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT