Question
Hot oil at a rate of 5 kg/s (Cpm= 2 kJ/kg. K) enters in a 2-4...
Hot oil at a rate of 5 kg/s (Cpm= 2 kJ/kg. K) enters in a 2-4 shell and tube heat exchanger at 366 K and is cooled to 344 K by 2 kg/s of water (Cpm= 4 kJ/kg. K) entering at 283 K. The overall heat transfer coefficient U0 is 340 W/m . Calculate the area requied. If the length of each tube is 1.2 m, and the diameter of each tube is 0.1 m, calculate the number of tubes?
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
Water at a flow rate of 60 kg/s enters the shell-side of a baffled shell-and-tube heat...
Water at a flow rate of 60 kg/s enters the shell-side
of a baffled shell-and-tube heat exchanger at 35 °C and leaves at
25 °C. The heat will be transferred to 150 kg/s of raw water coming
from a supply at 15 °C. You are requested to design the heat
exchanger for this purpose. A single shell and single tube pass is
preferable. The tube diameter is ¾ in. (19 mm outer diameter with
16 mm inner diameter) and tubes...
A process fluid having a specific heat of 3500 J/kg?K and flowing at 2 kg/s is...
A process fluid having a specific heat of 3500 J/kg?K and
flowing at 2 kg/s is to be cooled from 80 °C to 40 °C with chilled
water, which is supplied at a temperature of 15 °C and a flow rate
of 2.5 kg/s. Assuming an overall heat transfer coefficient of 2000
W/m2?K, calculate the required heat transfer areas for the
following exchanger configurations: (a) Parallel flow; (b) Counter
flow; (c) a 1-2 shell and tube exchanger with the water...
A sugar solution (? = 1080 kg/m3, cp = 3601 J/kg ? K, kf = 0.5764...
A sugar solution (? = 1080 kg/m3, cp = 3601 J/kg ? K,
kf = 0.5764 W/m ? K, ? = 1.3 × 10–3 N ? s/m2) flows at
rate of 60,000 kg/hr and is to be heated from 25°C to 50°C. Water
at 95°C is available at a flow rate of 75,000 kg/hr (cp = 4004 J/kg
? K). It is proposed to use a one shell pass and two tubes pass
shell-and-tube heat exchanger containing 3/4 in. OD,...
Oil enters a counterflow heat exchanger at 600 K with a mass flow rate of 10...
Oil enters a counterflow heat exchanger at 600 K with a mass
flow rate of 10 kg/s and exits at 350 K. A separate stream of
liquid water enters at 20°C, 5 bar. Each stream experiences no
significant change in pressure. Stray heat transfer with the
surroundings of the heat exchanger and kinetic and potential energy
effects can be ignored. The specific heat of the oil is constant,
c = 2 kJ/kg · K.
If the designer wants to ensure...
Oil enters a counterflow heat exchanger at 525 K with a mass flow rate of 10...
Oil enters a counterflow heat exchanger at 525 K with a mass
flow rate of 10 kg/s and exits at 275 K. A separate stream of
liquid water enters at 20°C, 5 bar. Each stream experiences no
significant change in pressure. Stray heat transfer with the
surroundings of the heat exchanger and kinetic and potential energy
effects can be ignored. The specific heat of the oil is constant, c
= 2 kJ/kg · K. If the designer wants to ensure...
Oil enters a counterflow heat exchanger at 525 K with a mass flow rate of 10...
Oil enters a counterflow heat exchanger at 525 K with a mass
flow rate of 10 kg/s and exits at 275 K. A separate stream of
liquid water enters at 20°C, 5 bar. Each stream experiences no
significant change in pressure. Stray heat transfer with the
surroundings of the heat exchanger and kinetic and potential energy
effects can be ignored. The specific heat of the oil is constant, c
= 2 kJ/kg · K. If the designer wants to ensure...
Data for carbon dioxide: Molecular weight:44.0 Heat capacity of gas phase: 0.036+4.23 x10-5T (in kJ/moleoC, T is...
Data for carbon dioxide:
Molecular weight:44.0
Heat capacity of gas phase: 0.036+4.23
x10-5T (in kJ/moleoC, T is
in oC)
Viscosity Pr k
(W/m K)
180oC2.13 x10-5kg/(m
s) 0.721 0.029
130oC 1.93x10-5kg/(m
s) 0.738 0.025
80oC 1.72x10-5kg/(m
s) 0.755 0.020
Approximate density: 2.0 kg/m3
Data for water:
Molecular weight:18.0
Heat capacity for liquid water: 0.0754 kJ/mole
oC
Viscosity:
Viscosity Pr k
(W/m K)
180oC139 x10-6kg/(m
s) 0.94 0.665
130oC 278x10-6kg/(m
s) 1.72 0.682
80oC 472x10-6kg/(m
s) 3.00 0.658
Ideal gas constant:
0.08206 L atm/(mol K)
Carbon dioxide, with flow rate of 0.10 kg/s, is to be cooled
from 180 oC to 80...
Cold water enters a counter flow heat exchanger at 20ºC at a rate of 10 kg/s,...
Cold water enters a counter flow heat exchanger at 20ºC at a
rate of 10 kg/s, where it is heated by a hot water stream that
enters the heat exchanger at 80ºC at a rate of 2 kg/s. Assuming the
specific heat of water to remain constant at Cp=4.18 kJ/(kg.ºC),
determine the maximum heat transfer rate and the outlet
temperatures of the cold and the hot water streams.
A 1 to 2 baffled shell-and-tube type heat exchanger is used as an engine oil cooler....
A 1 to 2 baffled shell-and-tube type heat exchanger is
used as an
engine oil cooler. Cooling water flows through tubes at 25 °C at
a
rate of 8.16 kg/s and exits at 35 °C. The inlet and outlet
temperatures of the engine oil are 65 and 55 °C, respectively.
The
heat exchanger has 12.25-in. I.D. shell, and 18 BWG and
0.75-in.
O.D. tubes. A total of 160 tubes are laid out on a 15/16-in.
triangular
pitch. By assuming Ro...
Saturated water vapor leaves a steam turbine at a flow rate of 1.47 kg/s and a...
Saturated water vapor leaves a steam turbine at a flow rate of
1.47 kg/s and a pressure of 0.51 bar. The vapor is to be completely
condensed to saturated liquid in a shell-and-tube heat exchanger
that uses city water as the cold fluid. The water enters the
thin-walled tubes at 17oC and is to leave at 57.6
oC. Assuming an overall heat transfer coefficient of
2000 W/m2K, determine the required heat exchanger
surface area and the water flow rate. cp,c...
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 8 minutes ago
asked 17 minutes ago
asked 23 minutes ago
asked 25 minutes ago
asked 39 minutes ago
asked 41 minutes ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago