Question

What is the velocity of water in most city water pipes?

What is the velocity of water in most city water pipes?

Homework Answers

Answer #2

The minimum municipal water distribution system pipes diameter in United States is 8". For a nominal diameter of 8 inches , the Water Delivery Velocity may lie between 4-6 ft/s. Although there could be some pipes with 4" dia having water flow velocity 3-4 ft/s. Overall in most cities , a fixed pressure is maintained in the pipes which may range from 50 psi to 120psi, and the velocities at different cross sections varies with the area of cross section and the distance from the pump.

answered by: anonymous
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
If water and air flow in pipes of the same diameter, at the same temperature, and...
If water and air flow in pipes of the same diameter, at the same temperature, and at the same mean velocity, knowing that the kinematic viscosity of water is smaller than air, which flow is more likely to be turbulent? Explain why.
Consider water pipes. Suppose all water pipes of every size are made from a very strong...
Consider water pipes. Suppose all water pipes of every size are made from a very strong material of effectively zero thickness (this is to make the math much easier). The output of a water pipe is the number of gallons of water that can flow through it in a month. This is proportional to the area of a cross section. Water pipes are cylinders. The cost of constructing a water pipe is proportional to the amount of material used. Suppose...
Water flows from the mains to the plumbing of a house. The house pipes have a...
Water flows from the mains to the plumbing of a house. The house pipes have a radius of 3.6 cm and the water flows through them at a velocity of 0.14 m/s. Calculate the maximum velocity (in m/s) of water that can be obtained from a tap that has been fully opened where the tap radius is 0.8 cm. A square metal plate of length 1.1 m is lying on the ground in the direct sunlight on a hot day...
A 400 mm diameter pipe, conveying water, branches into two pipes of diameters 300 mm and...
A 400 mm diameter pipe, conveying water, branches into two pipes of diameters 300 mm and 200mm respectively. If the discharge in the 400 mm diameter pipe is 380L/s, compute the average velocity in this pipe. If the average velocity in 300mm diameter pipe is 200L/s, find the discharge and velocity head in 200mm diameter pipe.                                               
why the pipes in which fluid is travelling with great velocity and in elbow and bend...
why the pipes in which fluid is travelling with great velocity and in elbow and bend piping more are coroded
A 30 cm pipe is required for a town’s water supply. As pipes of this diameter...
A 30 cm pipe is required for a town’s water supply. As pipes of this diameter were not available in the market, it was decided to lay two parallel pipes of equal diameter. Find the diameter of the parallel pipes. Assume f is same for all pipes
City water will be cooled in a heat exchanger by sea water entering at 15°C. The...
City water will be cooled in a heat exchanger by sea water entering at 15°C. The outlet temperature of the sea water is 20°C. City water will be recirculated to reduce water consumption. The suction line of the pump has an inner diameter of 154 mm, is 22 m long, and has two 90° bends and a hinged check valve. The pipe from the pump to the heat exchanger has an inner diameter of 127 mm, is 140 m long,...
How high (in meters) would the water rise in the pipes of a building if the...
How high (in meters) would the water rise in the pipes of a building if the water pressure gauge shows the pressure to be 256 kPa at ground level?
What is the difference between “pipes in series” and “pipes in parallel” in terms of discharge...
What is the difference between “pipes in series” and “pipes in parallel” in terms of discharge and head of them?
Water flows through two horizontal pipes that are connected one after another but located at different...
Water flows through two horizontal pipes that are connected one after another but located at different heights. There are pressure gauges on each of the pipes. The speed of the water through the lower pipe is 5.0 m/s. The two pipes have different diameters. The lower pipe has a diameter of 6 cm and the higher one 4 cm. Assume no viscous losses. a. Draw a diagram of the situation and calculate the speed in the upper pipe. b. What...