Question

A Student cycle engine is analyzed using the cold air-standard method. Given the definition of each...

A Student cycle engine is analyzed using the cold air-standard method. Given the definition of each process in the cycle, determine the thermal efficiency of the engine for each set of defined ratios listed below. All ratios are given as the larger value over the smaller one.

--Given Values--
Process 1-2 = Isentropic compression & volume ratio=rv12
Process 2-3 = Isothermal compression & volume ratio=rv23
Process 3-4 = Isobaric heat addition & temperature ratio=rT34
Process 4-5 = Isometric heat addition & temperature ratio=rT45
Process 5-6 = Isentropic expansion
Process 6-1 = Isometric cooling

c) Enter the equation for (positive) Qout(m,cp,cv,T1,T2,T3,T4,T5,T6,rV12,rV23,rT34,rT45)

Your Answer = m*cv*(T6-T1) Incorrect.

h) Enter the equation for T6(k,T1,rV12,rV23,rT34,rT45)

Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A Diesel cycle engine is analyzed using the cold air standard method. Given the conditions at...
A Diesel cycle engine is analyzed using the cold air standard method. Given the conditions at state 1, compression ratio (r), and cutoff ratio (rc) determine the efficiency and other values listed below. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively. Given Values T1 (K) = 326 P1 (kPa) = 105 r = 16.5 rc = 1.8 a) Determine the specific internal energy (kJ/kg) at state 1. b) Determine the...
A Diesel cycle engine is analyzed using the air standard method. Given the conditions at state...
A Diesel cycle engine is analyzed using the air standard method. Given the conditions at state 1, compression ratio (r), and cutoff ratio (rc) determine the efficiency and other values listed below. Note: The gas constant for air is R=0.287 kJ/kg-K. --Given Values-- T1 (K) = 322 P1 (kPa) = 120 r = 11.5 rc = 1.6 Specific internal energy (kJ/kg) at state 1: 229.86 Relative specific volume at state 1= 520.52 Relative specific volume at state 2= 45.26 Temperature...
A Diesel cycle engine is analyzed using the air standard method. Given the conditions at state...
A Diesel cycle engine is analyzed using the air standard method. Given the conditions at state 1, compression ratio (r), and cutoff ratio (rc) determine the efficiency and other values listed below. Note: The gas constant for air is R=0.287 kJ/kg-K. --Given Values-- T1 (K) = 322 P1 (kPa) = 120 r = 11.5 rc = 1.6 Specific internal energy (kJ/kg) at state 1: 229.86 Relative specific volume at state 1= 520.52 Relative specific volume at state 2= 45.26 Temperature...
1. An engine operating at a hot-air standard (k=1.35) Dual Combustion Cycle handles air at 100kPa,...
1. An engine operating at a hot-air standard (k=1.35) Dual Combustion Cycle handles air at 100kPa, 34.5°C, & 0.3531m^3 during the beginning of the isentropic compression process. The engine has a percent clearance of 6.25% and an expansion ratio of 1.5 during the isentropic expansion process. It receives 165 kJ of heat during the constant volume process. What is the a.) Temperatures at different points of the cycle °C? b.) Net Work kJ? And c.) Mean effective pressure in kPa?
7.2 A Brayton cycle gas engine is analyzed using the air standard method. Given the conditions...
7.2 A Brayton cycle gas engine is analyzed using the air standard method. Given the conditions at state 1, pressure ratio (rp), and cutoff ratio (rc) determine the efficiency and other values listed below. The specific heat ratio and gas constant for air is given as k=1.4 and R=0.287 kJ/kg-K respectively. T1 (K) = 333 P1 (kPa) = 170 rp = 10.7 rc = 2.54 AV (m3/s) = 1.7 a) Determine the specific enthalpy (kJ/kg) at state 1. b) Determine...
1. The compression ratio of an air powered diesel cycle is A = 18 and the...
1. The compression ratio of an air powered diesel cycle is A = 18 and the cutting ratio is B = 2.2. The pressure of the air at the beginning of the compression process is C = 94 kPa and the temperature is D = 32 ° C. Considering that the specific temperatures change with temperature (using the air standard, not the cold air standard only, that is, using the relative specific volumes from the table) and accepting the gas...
Consider a cold air-standard Diesel cycle. At the beginning of compression, 102 kPa, and 300 K....
Consider a cold air-standard Diesel cycle. At the beginning of compression, 102 kPa, and 300 K. The mass of air is 0.120 kg, the compression ratio is 16, and the cut-off ratio is 2.0 For a cold air-standard analysis use the following values: cp = 1.005 kJ/kgK, cv = 0.718 kJ/kgK, k=1.40, M=28.97 kg/kmol. Determine the following : (a) pressure at end of compression stroke, in kPa (b) temperature at end of compression stroke, in K (c) maximum temperature in...
Your new engine design consists of a piston cylinder arrangement. The engine operates with mostly air...
Your new engine design consists of a piston cylinder arrangement. The engine operates with mostly air and a small amount of fuel. The system undergoes a cycle. The initial Pressure and temperature are p1= 1bar and T1= 27°C. The system undergoes a power cycle consisting of the following process: Process 1-2                         constant volume to a pressure, P2 of 4 bars Process 2-3                         expansion of pv=constant Process 3-1                         constant-pressure compression Draw the system and pv diagrams If P2 is 4...
1) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the...
1) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the compression process, the temperature is 20°C, and the pressure is 100 kPa. The heat added is 500 kJ/kg. Determine the cycle efficiency, work output, and the heat rejected 2) An air-standard Otto cycle operates with a minimum temperature of 300 K and a maximum temperature of 1700 K. The compression ratio of the cycle is 7. At the beginning of the compression process, the...
10) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the...
10) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the compression process, the temperature is 20°C, and the pressure is 100 kPa. The heat added is 500 kJ/kg. Determine the cycle efficiency, work output, and the heat rejected. 11)An air-standard Otto cycle operates with a minimum temperature of 300 K and a maximum temperature of 1700 K. The compression ratio of the cycle is 7. At the beginning of the compression process, the pressure...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT