Question

a- A plate of length 4m in the direction of the flow and of width 2m...

a- A plate of length 4m in the direction of the flow and of width 2m is pulled at a speed of 108 km/h in water at 15oC find the power needed against the shear force for one side of the plate .

b- oil with dynamic viscosity=0.1 N-s/m2 and density=863 kg/m3 flows between 2 parallel plates 2.5 mm apart and inclined 30 degrees to the horizontal at a rate of 300 cm3/s per one meter of width. Calculate the pressure gradient in the direction of flow.

Homework Answers

Answer #1

power against shear force = 198.614 kW

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A plate of length 30 mm in the direction of the flow, a width of 45...
A plate of length 30 mm in the direction of the flow, a width of 45 mm and thickness of 1mm, has a surface temperature of 78oC is placed in a stream of air at a temperature of 30oC and velocity of 3.5m/s . Calculate: The heat loss from the top and bottom of the plate The heat loss from a cylinder 5cm long and has the same volume as the plate and placed across the flow. for air: ν=...
A 4m ^ 2 plate of 18 gauge steel moves forward at a speed of 2m...
A 4m ^ 2 plate of 18 gauge steel moves forward at a speed of 2m / s, while the base of the conveyor belt moves in the opposite direction at a speed of 0.5m / s. Between the conveyor belt and the plate is a 2.5mm thick layer of wax with a viscosity of 2 Pa-s. Determine: a) The pressure under the steel plate b) The necessary force necessary to move the steel plate to the right. Additional data...
The fluid of density 2300kg/m3 and viscosity of 10-3 m2/s is placed between two parallel plates...
The fluid of density 2300kg/m3 and viscosity of 10-3 m2/s is placed between two parallel plates where the distance between two plates is 8 mm. the length of the top and the bottom plate is 4.5m. The top plate is moved and the shear stress is measured to be 1540Pa. Estimate the value of the flow Reynolds number. Draw the appropriate figure and explain the type of flow.
The fluid of density 2300kg/m3 and viscosity of 10-3 m2 /s is placed between two parallel...
The fluid of density 2300kg/m3 and viscosity of 10-3 m2 /s is placed between two parallel plates where the distance between two plates is 8 mm. the length of the top and the bottom plate is 4.5m. The top plate is moved and the shear stress is measured to be 1540Pa. Estimate the value of the flow Reynolds number. Draw the appropriate figure and explain the type of flow.
Consider a counter-flow plate HX with channels of 12 in length, 6 in width, and 3/8...
Consider a counter-flow plate HX with channels of 12 in length, 6 in width, and 3/8 in thickness. The heat exchanger consists of three flow channels with air at 200oC entering the center channel, and air at 25oC entering the 2 outer channels, above and below the center channel. The center channel has a flow rate of 3 x 10-4 m3/s and the outer two channels have a flow rate of 1.67 x 10-4 m3/s in each channel. The plates...